TSC300 Industrial 3/4″ couplings, replace jaw couplings & universal joint in industrial power transmission coupling applications.
Couplings in an industrial power transmission setup have a number of issues to contend with, annual maintenance, fundamental design flaws coming from a century old technology, industry has evolved but the technology that makes up the standard coupling and universal joint has not.
Twin Spring Coupling offers something different.
Industrial power transmission couplings are broken into two main areas, high speed low angle of misalignment and lower speed higher angle of misalignment.
Traditionally these two needs have been service by two different couplings – Motion control couplings like jaw, elastomeric type couplings and universal joints.
The problem with both couplings are their fundamental design weaknesses, for motion control coupling they can run fast but cannot work at over 1 degrees of misalignment before they start to wear out.
The universal joint can run at more than 4 degrees but needs constant maintenance to keep the bearings and pivot point greased or they too will wear out quickly.
On top of that they traditionally cannot run over 8 degrees before technical issues like balancing and bearing wear become issues. In a 24/7/365 situation like industrial power transmission that’s going to create interruption and a increased annual maintenance bill.
TSC300 Industrial – how it can replace either a uni joint or a jaw coupling with one coupling.
The one piece design means no greasing, no replacing components just a annual checkup, vital in industrial 24/7 applications.
Twin Spring Coupling TSC300 Industrial has no internal components so no annual maintenance and can run at high and low speed as needed.
Our coupling is available in all the standard industry splines for easy replacement or retrofit for OEM. Metric sizes available.
Flexible Up to 45 degrees.
Speeds up to 7000 rpm.
Constructed of 4140 Alloy or T6061 T6 Aluminum.
Replaces.
Ruland – UJ-HD1000, UJ-HD1125, UJ-HS875, JC jaw, MJC jaw couplings.
Guardian Couplings – Curved jaw 28/38 Red & Green, 38/45 White, 42/55 Blue, 48/60 Blue, Guardex M-65, Guardex I-45, LJW L110, LJW L150, LJW L190.
TB Woods – Dura-Flex WE20, WE30, L Jaw L-110, AL-110, SS-110, L-150, AL-150, SS-150, L-190, G Flex grid coupling 1000T10, 1000T20 -1040.
Lovejoy – L110, L150, D-6B, D-7B, NB-8B, DD-7B, LOJ-10B, C226, CJ 42/55, 48/60 (92A), 38/45 (98/95A), 38/45 (64D), U-100S, Uniflex U150R, Saga S15, S Flex Size 7-10, Delta Flex 50.
Belden – UJ-HD1500, UJ-HS1500, UJ-HD1750, UJ-HS1500, UJ-HS1750, UJ-NB1500x750, SS-UJ-NB1500x750
Curtis – CJ646B, CJ647B.
Rexnord – Omega E15, E15M, E20, E20M, Omega HDY15, HDY20, Viva V150, V190.
Falk – Wrapflex 20R.
SIT – GU6P, GU6H, 65 red and green.
Boston Gear – FC30 XFCBB Bronze, FC38 XFCA Poly, FC45 Rubber XFCR, UJ-J175B, JS250B, JS300B, UJAS 16-16, UJNL 20-20.
KTR – Rotex AL-H 38,42,45 and GJL 38,42,45 (92A and 98A).
Martin – Quadra Flex Size 10 Thermo Plastic Rubber (TPR), Size 7 Hytrel. MS190, MS225 Buna-N, ML225 Buna-N, ML110, ML150 Hytrel.
Moog – 237, 240, 437, 437G, 436, 466, 995.
Neapco – 1200, 1-1275, 1800, 1-0221, 1-1001, 1-0443, 2-0456, 2000.
Spicer – 5-443X, 5-3215X, 5-3233X, 5-3232X, 5-736X, 5-554X, 5-248X, 5-242X.
https://en.wikipedia.org/wiki/Coupling#Twin_spring_coupling.
For more information on the TSC300 go to https://twinspringcoupling.com/coupling-products/tsc-300.
