For use with F (Flex-Flex) or FFR (Flex-Rigid) couplings. Exposed bolts are the standard design. F Type coupling consists of two flex hubs, two sleeves, and one accessory kit.
Lovejoy 69790400227 Steel F 5 Hub, Rough Stock Bore, 6.03" Length Through Bore, 9.5" OD, 434700 Inch Pounds Item Torque
- Provides parallel, angular misalignment and end float
- Patented Vari-Crown tooth form for long life
- Standard 20° pressure angle
Description
Additional information
| Asin | B010DT9XSW |
|---|---|
| Dimensions | |
| Weight | |
| Manufacturer |
Reviews (0)
Be the first to review “Lovejoy 69790400227 Steel F 5 Hub, Rough Stock Bore, 6.03" Length Through Bore, 9.5" OD, 434700 Inch Pounds Item Torque”
Related products
- Shrouded metric bolts
- Unequaled bore and torque capacity
- 1.5° of misalignment per gear mesh
- Improved fastener corrosion resistance
- Advanced seal design intensifying contamination resistance
- Shrouded metric bolts
- Unequaled bore and torque capacity
- 1.5° of misalignment per gear mesh
- Improved fastener corrosion resistance
- Advanced seal design intensifying contamination resistance
Lovejoy 5JE Solid Design S-Flex Coupling EPDM Rubber Sleeve
Specifications
Description |
5JE SLEEVE |
Coupling Size |
5JE |
Sleeve Type |
JE |
Type |
Sleeves for S-Flex Endurance Couplings |
Material |
EPDM |
Color |
Black |
Connection Type A x B |
Coupling Sleeve |
Weight |
0.30 lb |
Nominal Torque |
312 in·lb35.26 N·m |
- Shrouded bolts
- Unequaled bore and torque capacity
- 1.5° of misalignment per gear mesh
- Improved fastener corrosion resistance
- Advanced seal design intensifying contamination resistance
Gear & Sleeve
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
Specifications
Description |
8E SLEEVE |
Coupling Size |
8E |
Sleeve Type |
E |
Type |
Sleeves for S-Flex Endurance Couplings |
Material |
EPDM |
Color |
Black |
Connection Type A x B |
Coupling Sleeve |
Weight |
1.15 lb |
Nominal Torque |
1475 in·lb166.66 N·m |
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
- Lovejoy offers flexible sleeves for S-Flex Endurance couplings in three designs: one-piece solid, one-piece split, and two-piece with retaining ring
- The one-piece split design provides solutions for applications with unique requirements where small shaft separations inhibit the installation of a one-piece solid sleeve
- Pre-molded teeth along the diameter of the sleeve engage with teeth of the coupling flanges
- No clamps or screws are needed to connect the flanges with the
- Unequaled bore and torque capacity
- 1.5° of misalignment per gear mesh
- Improved fastener corrosion resistance
- Advanced seal design intensifying contamination resistance
- Unequaled bore and torque capacity
- Allows for 1.5 degree of misalignment per gear mesh
- Improved fastener corrosion resistance
- Advanced seal design intensifying contamination resistance
Reviews
There are no reviews yet.