Agricultural & Construction Machinery
2 of Weasler 200-0675 Cross & Bearing Kit
R-Kits are standard and offer a highquality lube cycle of 8 hours which is acceptable for many applications. R-kits and E-kits are interchangeable for all available Weasler series as well as with standard cross and bearing sets in the market. This means that a Weasler PTO drive shaft with R-kits can still be upgraded to E-kits or M-kits. PERFORMANCE BENEFITS Lubrication cycle of up to 8 hours. Interchangeable with standard North American cross and bearing kits available in the market. DESIGN FEATURES A black seal with grease fitting makes it fast and easy to find a P-Kit.
Agricultural & Construction Machinery
2 of Weasler 200-1400 14 Series Cross And Bearing Kit
- R-Kits are standard and offer a high-quality lube cycle of 8 hours which is acceptable for many applications. R-kits and E-kits are interchangeable for all available Weasler series as well as with standard cross and bearing sets in the market. This means that a Weasler PTO drive shaft with R-kits can still be upgraded to E-kits or M-kits. Lubrication cycle of up to 8 hours. A black seal with grease fitting makes it fast and easy to find a P-Kit.
- 012014, 0161021, 1090500M91, 1090501M91, 1090529M1, 1240, 129437IMP, 136908, 139, 14N, 14R, 14R/GN, 14RIMP, 15P405, 200 1400, 200-1400, 2000, 2001400, 200464C91, 2075X, 221613, 261-014, 261014, 302-1400, 3021400, 339-14, 33914, 971-2001400, 9712001400, CBA140, L14N, PM200-1400, R14N/140
- 14N Series
- PTO
Agricultural & Construction Machinery
2 of Weasler 200-5500 Cross & Bearing Kit
55 series cross and bearing kit, r standard, center grease fitting
PERFORMANCE BENEFITS
Lubrication cycle of up to 8 hours.
Interchangeable with standard North American cross and bearing kits available in the market.
DESIGN FEATURES
A black seal with grease fitting makes it fast and easy to find a P-Kit.
200 5500, 200-5500, 2005500, 2855N, 339-55, 33955, 55N, 55R, 971-2005500, 9712005500, CBAN55, L55/55NW, PM200-5500
55 Series
PTO
Agricultural & Construction Machinery
2 of Weasler 200-7491 CV Unequal Cross & Bearing
- P-Kits are the Weasler Profile metric version of the R-Kit. P-Kits are standard and offer a high quality lube cycle of 8 hours which is acceptable for many applications. P-kits and E-kits are interchangeable with other cross and bearing kits in Weasler series as well as with standard cross and bearing sets in the market. This means that a Weasler PTO drive shaft with P-kits can still be upgraded to E-kits or M-kits.
- 2380 CV Series
- PTO
Agricultural & Construction Machinery
2 of Weasler 200-8370
| Series | 2100 |
|---|---|
| Snap Ring Type | OSR |
| Bearing Diameter | 22.0 mm (.8661) |
| Cap To Cap Overall Length | 54.8 mm (2.158) |
| Rated HP at 540 RPM | 16 |
| Rated HP at 1000 RPM | 23 |
| Greaseable | Y |
Agricultural & Construction Machinery
200-8261 Cross & Bearing Kit Weasler replacement
- OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering.
- Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product.
- This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications.
- Hassle-Free Returns Offered on Most Items
Agricultural & Construction Machinery
200-8474 Cross and Bearing Kit
- OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering.
- Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product.
- This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications.
- Hassle-Free Returns Offered on Most Items
Agricultural & Construction Machinery
Belden UJ-HD1500x00 KIT
HEAVY DUTY SINGLE UNIVERSAL JOINTS
The Belden single pin & block universal joint is manufactured from high-grade alloy steel for increased durability and better performance than standard industrial-grade models. All components are heat treated, precision machined and ground to close tolerances. The Heavy Duty universal joint provides exceptional service life in the most demanding applications. All joints are available with or without a lubricant retaining boot.
Features
-
High grade-alloy steel
-
Maximum operating angles up to 45° (Special design options with higher angles may be available)
-
Wide selection of hub configurations & finishes
Max. Operating Torque Lb-in [N-m] Ultimate Torque Lb-in [N-m]
| 2000 [226] | 10000 [1129] |
| O.D Nominal (in) | O.D in [mm] | Inside Bore in [mm] | O.Length in [mm] | Yoke Length in [mm] | Hub Length / Bore Depth in [mm] | Keyway [in] | S.Steel |
| 1-1/2" | 1.495 [37.97] | n/a | 4.250 [108.0] | 2.125 [54.0] | 1.40 [35.6] | n/a | n/a |
Agricultural & Construction Machinery
Belden UJ-HD1500x750
HEAVY DUTY SINGLE UNIVERSAL JOINTS
The Belden single pin & block universal joint is manufactured from high-grade alloy steel for increased durability and better performance than standard industrial-grade models. All components are heat treated, precision machined and ground to close tolerances. The Heavy Duty universal joint provides exceptional service life in the most demanding applications. All joints are available with or without a lubricant retaining boot.
Features
-
High grade-alloy steel
-
Maximum operating angles up to 45° (Special design options with higher angles may be available)
-
Wide selection of hub configurations & finishes
| 2000 [226] | 10000 [1129] |
| O.D Nominal (in) | O.D in [mm] | Inside Bore in [mm] | O.Length in [mm] | Yoke Length in [mm] | Hub Length / Bore Depth in [mm] | Keyway [in] | S.Steel |
| 1-1/2" | 1.495 [37.97] | 0.7500 [19.050] | 4.250 [108.0] | 2.125 [54.0] | 1.40 [35.6] | n/a | n/a |
Agricultural & Construction Machinery
Belden UJ-HD1500x750K
HEAVY DUTY SINGLE UNIVERSAL JOINTS
The Belden single pin & block universal joint is manufactured from high-grade alloy steel for increased durability and better performance than standard industrial-grade models. All components are heat treated, precision machined and ground to close tolerances. The Heavy Duty universal joint provides exceptional service life in the most demanding applications. All joints are available with or without a lubricant retaining boot.
Features
-
High grade-alloy steel
-
Maximum operating angles up to 45° (Special design options with higher angles may be available)
-
Wide selection of hub configurations & finishes
| 2000 [226] | 10000 [1129] |
| O.D Nominal (in) | O.D in [mm] | Inside Bore in [mm] | O.Length in [mm] | Yoke Length in [mm] | Hub Length / Bore Depth in [mm] | Keyway [in] | S.Steel |
| 1-1/2" | 1.495 [37.97] | 0.7500 [19.050] | 4.250 [108.0] | 2.125 [54.0] | 1.40 [35.6] | 3/16 x 3/32 | Yes |
Agricultural & Construction Machinery
Belden UJ-SS1500x00 KIT
STAINLESS STEEL SINGLE UNIVERSAL JOINTS
Features • Corrosion resistance • Standard operating angles up to 45° • Lubricant-retaining boot covers can be added for environmental protection The standard stainless steel joint is made from AISI 303 and AISI 416 stainless steel. The joint yokes are 303 and the pins & blocks are hardened 416 stainless steel to provide higher strength and improved wear resistance. Components can be made from other grades of stainless steel to meet the customer’s exact application specifications. Max. Operating Torque Lb-in [N-m] Ultimate Torque Lb-in [N-m]|
1450 [163] |
7250 [819] |
| O.D Nominal (in) | O.D in [mm] | Inside Bore in [mm] | O.Length in [mm] | Yoke Length in [mm] | Hub Length / Bore Depth in [mm] | Keyway [in] | S.Steel |
| 1-1/2" | 1.495 [37.97] | n/a | 4.250 [108.0] | 2.125 [54.0] | 1.40 [35.6] | n/a | n/a |
Agricultural & Construction Machinery
Belden UJ-SS1500x750K
STAINLESS STEEL SINGLE UNIVERSAL JOINTS
Features • Corrosion resistance • Standard operating angles up to 45° • Lubricant-retaining boot covers can be added for environmental protection The standard stainless steel joint is made from AISI 303 and AISI 416 stainless steel. The joint yokes are 303 and the pins & blocks are hardened 416 stainless steel to provide higher strength and improved wear resistance. Components can be made from other grades of stainless steel to meet the customer’s exact application specifications. Max. Operating Torque Lb-in [N-m] Ultimate Torque Lb-in [N-m]| 1450 [163] |
7250 [819] |
| O.D Nominal (in) | O.D in [mm] | Inside Bore in [mm] | O.Length in [mm] | Yoke Length in [mm] | Hub Length / Bore Depth in [mm] | Keyway [in] | S.Steel |
| 1-1/2" | 1.495 [37.97] | .7500 [19.050] | 4.250 [108.0] | 2.125 [54.0] | 1.40 [35.6] | 3/16 x 3/32 | Yes |