The Hercuflex coupling has increase nominal torque, larger maximum bore size and longer service life. It is interchangeable with standard AGMA flange interface.
Lovejoy 69790436621 HERCUFLEX FX Series 36621 FX 2.5SM Steel Coupling, Rough Stock Bore x Rough Stock Bore, 6.25" OD, 8.38" OAL
Description
Additional information
| Asin | B010Q5VYF8 |
|---|---|
| Dimensions | |
| Weight | |
| Manufacturer |
Reviews (0)
Be the first to review “Lovejoy 69790436621 HERCUFLEX FX Series 36621 FX 2.5SM Steel Coupling, Rough Stock Bore x Rough Stock Bore, 6.25" OD, 8.38" OAL”
Related products
- Shrouded metric bolts
- Unequaled bore and torque capacity
- 1.5° of misalignment per gear mesh
- Improved fastener corrosion resistance
- Advanced seal design intensifying contamination resistance
- Unequaled bore and torque capacity
- Allows for 1.5 degree of misalignment per gear mesh
- Improved fastener corrosion resistance
- Advanced seal design intensifying contamination resistance
- Unequaled bore and torque capacity
- 1.5° of misalignment per gear mesh
- Improved fastener corrosion resistance
- Advanced seal design intensifying contamination resistance
Lovejoy 5JE Solid Design S-Flex Coupling EPDM Rubber Sleeve
Specifications
Description |
5JE SLEEVE |
Coupling Size |
5JE |
Sleeve Type |
JE |
Type |
Sleeves for S-Flex Endurance Couplings |
Material |
EPDM |
Color |
Black |
Connection Type A x B |
Coupling Sleeve |
Weight |
0.30 lb |
Nominal Torque |
312 in·lb35.26 N·m |
Gear & Sleeve
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
Specifications
Description |
8E SLEEVE |
Coupling Size |
8E |
Sleeve Type |
E |
Type |
Sleeves for S-Flex Endurance Couplings |
Material |
EPDM |
Color |
Black |
Connection Type A x B |
Coupling Sleeve |
Weight |
1.15 lb |
Nominal Torque |
1475 in·lb166.66 N·m |
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
- Lovejoy offers flexible sleeves for S-Flex Endurance couplings in three designs: one-piece solid, one-piece split, and two-piece with retaining ring
- The one-piece split design provides solutions for applications with unique requirements where small shaft separations inhibit the installation of a one-piece solid sleeve
- Pre-molded teeth along the diameter of the sleeve engage with teeth of the coupling flanges
- No clamps or screws are needed to connect the flanges with the
- Shrouded metric bolts
- Unequaled bore and torque capacity
- 1.5° of misalignment per gear mesh
- Improved fastener corrosion resistance
- Advanced seal design intensifying contamination resistance
Reviews
There are no reviews yet.