Bushings & Bushed Bearings
TB Wood SDS15/16 Sure-Grip Bushing
15/16 in. Bore, Quick Detachable Sure-Grip® Bushing, Size SDS, Steel Material
Model: SDS15/16
Sure-Grip® Quick Detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing’s position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters, and the mounting of different sheaves on the same shaft using the same bushing.
Bearings, Balls & Bushings
TB Woods QT12
TB Woods Type QT QT12 Sure-Grip Bushing
QT12
1/2 in. Bore, Quick Detachable Sure-Grip® Bushing, Size QT, Steel Material
MFR #QT12
Bushings & Bushed Bearings
TB Woods SDS12 Sure-Grip Bushing
1/2 in. Bore, Quick Detachable Sure-Grip® Bushing, Size SDS, Steel Material
Model: SDS12
Sure-Grip® Quick Detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing’s position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters, and the mounting of different sheaves on the same shaft using the same bushing.
Bushings & Bushed Bearings
TB Woods SH34 Sure-Grip Bushing
-
3/4 in. Bore, Quick Detachable Sure-Grip® Bushing, Size SH, Steel Material
Model: SH34
Sure-Grip® Quick Detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing’s position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters, and the mounting of different sheaves on the same shaft using the same bushing. - Quick disconnect bushing with a torque capacity of 3,500 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
- Split through flange and taper to provide strong clamping on the shaft
- Cast iron for resistance to wear, galling, and corrosion
- Keyed to the shaft to prevent the shaft from rotating in the bushing
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads
Bearings, Balls & Bushings
TB Woods SK138
1 3/8 in. Bore, Quick Detachable Sure-Grip® Bushing, Size SK, Cast Iron Material
Model: SK138
Sure-Grip® Quick Detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing’s position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters, and the mounting of different sheaves on the same shaft using the same bushing.
Bushings & Bushed Bearings
TB Woods TL251725MM
25 mm. Bore, Taper-Lock™ Bushing, Size 2517, Steel Material
Model: TL251725MM
The Taper-Lock™ bushing system keeps the sprocket hubs narrow so the length-thru-bore dimension is less than ever before. The left-justified hub design allows shaft mounting close to bearings, keeping the center of load dimension small while preventing issues with high overhung loads.\n\nTaper-Lock™ bushings are split through the flange and gradual taper to provide a true clamp fit on the shaft that is the equivalent of a shrink fit.
Bushings & Bushed Bearings
TB Woods TL4040312
3 1/2 in. Bore, Taper-Lock™ Bushing, Size 4040, Steel Material
Model: TL4040312
The Taper-Lock™ bushing system keeps the sprocket hubs narrow so the length-thru-bore dimension is less than ever before. The left-justified hub design allows shaft mounting close to bearings, keeping the center of load dimension small while preventing issues with high overhung loads.\n\nTaper-Lock™ bushings are split through the flange and gradual taper to provide a true clamp fit on the shaft that is the equivalent of a shrink fit.- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
- Cast iron for resistance to wear, galling, and corrosion
- Keyed to the shaft to prevent the shaft from rotating in the bushing
- Interchangeable with taper lock bushings from various manufacturers
Bushings & Bushed Bearings