Meritor is a global supplier for commercial vehicle manufacturers for specialty industries with a wide range of aftermarket solutions from drivetrain to brake systems.
YOKE SHAFTS – SPLINE MALE YOKE
- Genuine Meritor Round Bearings
Description
Additional information
| Asin | B086KYJVG1 |
|---|---|
| Dimensions | 2.38 x 1.67 x 1.66 inches |
| Weight | 11.85 pounds |
| Manufacturer | Meritor |
Reviews (0)
Be the first to review “YOKE SHAFTS – SPLINE MALE YOKE”
Related products
Agricultural & Construction Machinery
Weasler 700-6443 Yoke
AB4 series yoke with 43 mm trilobe bore and roll pin connection
Shaft yokes (or inner profile yokes) connect the cross and bearing kits to the telescoping shaft or inner tube. Tube yokes (or outer profile yokes), connect the other cross and bearing kits to the opposite side of the telescoping shaft or outer tube. Weasler provides both domestic (North American) and Weasler Profile metric shaft and tube yoke connection options. Domestic yokes are provided as square, rectangle, hexagon or splined in shape. Weasler Profile metric yokes are provided as lemon, star, or trilobe in shape.
Agricultural & Construction Machinery
Weasler 806-3522 Yoke
35 series yoke with round with 2 keyways bore and setscrew connection
Agricultural & Construction Machinery
Neapco 8-2012 PTO Quick Disconnect Yoke
8-2012 Power Take Off Quick Disconnect Yoke
Application: Automotive/Ag./Ind. PTO
Bore Size & Shape(In)(Mm): 1.375-6 Spline
Bore Type: Splined
Center Line To End Of Hub (In): 3.812
Driveline Series: W2200
Spline Od(In)/No. Teeth: 1.375-6
Agricultural & Construction Machinery
Neapco 22-2312 PTO Quick Disconnect Yoke
22-2312 Power Take Off Quick Disconnect Yoke
Part Number 22-2312
Application: Automotive/Ag./Ind. PTO
Bore Size & Shape(In)(Mm): 1.375-6B Spline
Bore Type: Splined
Center Line To End Of Hub (In): 4.810
Driveline Series: 2200
End Of Hub To Set Screw (In): 1.000
Hub Diameter (In): 2.280
Set Screw Location: Gap
Set Screw Thread Size (In)(Mm): 0.560
Agricultural & Construction Machinery
Weasler 10001248 Yoke and Shaft Assembly
12 Series Yoke And Shaft
12 series yoke and shaft, 1 x 1 1/8 rectangle
Weasler yoke weldment assemblies provide yoke to shaft and yoke to tube weldment options that are offered in both North American (domestic) , German, and Italian shaft and tube shapes.
Automotive
Neapco N2-4-JK02 Driveshaft End Yoke
N2-4-JK02 Driveshaft End Yoke - Conversion
Bore Type: Splined
Center Line Uj To End Of Hub (In): 3.000
Driveline Series: 1310HR
Hub Diameter (In): 1.875
Joint Angle (Degrees): 22.000
Length Thru Hole(In): 1.500
Spline Od(In)/No. Teeth: 1.250-24
Uj Retention: U-Bolt
Automotive
Spicer 211342X Socket Yoke Assembly
DOUBLE CARDAN CV DRIVESHAFT CENTERING YOKE- Fits 1984 BRONCO II with 1210 series yoke style rear output on transfer case
- Fits 1983 to 1985 RANGER 4X4 with 1210 series yoke style rear output on transfer case
- 1210 series
- 2.438 inches between Locating Tabs
- 1.062 inch bearing caps
- Outside Snap Rings Style
- Greaseable
Agricultural & Construction Machinery
Weasler 110-5520 Yoke
55 Series Auto-Lok Yoke
55 series yoke with 1 3/4-20 spline bore and auto-lok connection
PTO drive shafts start with a tractor yoke, the leading connection between the the tractor and the driveline. Weasler provides four types of Tractor Yokes: auto-lok, safety slide lock, spring-lok and quick disconnect. All yokes are compliant with ANSI/ASABE AD5673, ANSI/ASABE AD5674, ANSI/ASABE S604 and EN12965. For lawn and garden applications, specialized auto-lok and spring-lok yokes are available in addition to a male spline yoke. Agricultural tractor yokes are offered in 1 3/8″ 6-spline (type 1), 1 3/8″ 21-spline (type 2), and 1 3/4″ 20-spline (type 3) options to fit the specific tractor connection needed. Optionally 1 1/2″ 8-spline and 1 3/4″ 6-spline options are available. Lawn & Turf tractor yokes are offered in 1″ 10-spline and 1″ 15-spline.- Fits Series 55N: U-Joint Cap Size: 1-17/32” / 1.531” Cap to Cap: 4-5/16” / 4.313”.
- 110 5520, 10-5520, 1105520, 971-1105520, 9711105520, PM110-5520
- 55N Series
- PTO
Agricultural & Construction Machinery
Weasler 807-3520 Yoke
35 series yoke with 1 3/4-20 spline bore and clamp connection
The clamp yoke allows for a tight connection to a mating shaft to minimize fretting corrosion and wear, using standard hardware.
Agricultural & Construction Machinery
Weasler 200-8474 and 102-8406 kit
- Fits Series 4: U-Joint Cap Size: 27.0 MM / 1-1/16” (1.063) Cap to Cap: 74.6 MM / 2-15/16” (2.937). Fits Series 2300/210: U-Joint Cap Size: 27.0 MM 1-1/16” (1.063) / Cap to Cap: 74.6 MM / 2-15/16” (2.937).
- 200-8474, 102-8406
- Bondioli/Pavesi 4 & Walterscheid 2300/210 Series
- PTO
Agricultural & Construction Machinery
Weasler 101-7620 Yoke
AW35 series yoke with 1 3/4-20 spline bore and safety slide lock connection
Agricultural & Construction Machinery
Weasler 10000648 Yoke and Shaft
6 series yoke and shaft, 3/4 x 7/8 rectangle
Weasler yoke weldment assemblies provide yoke to shaft and yoke to tube weldment options that are offered in both North American (domestic) , German, and Italian shaft and tube shapes.
Agricultural & Construction Machinery
Weasler 10001448 Yoke
14 series yoke and shaft, 1 x 1 1/8 square
Weasler yoke weldment assemblies provide yoke to shaft and yoke to tube weldment options that are offered in both North American (domestic) , German, and Italian shaft and tube shapes.
Agricultural & Construction Machinery
Neapco N24GM03X Driveshaft End Yoke
N2-4-GM03X Driveshaft End Yoke - U-Bolt Construction
Part Number N2-4-GM03X
Bore Type: Splined
Center Line Uj To End Of Hub (In): 3.156
Driveline Series: 1310HR
Hub Diameter (In): 1.938
Joint Angle (Degrees): 20.000
Length Thru Hole(In): 1.156
Spline Od(In)/No. Teeth: 1.312-30
Uj Retention: U-Bolt
Neapco 8-2420 PTO End Yoke
8-2420 Power Take Off End Yoke
Part Number 8-2420
Application: Automotive/Ag./Ind. PTO
Bore Size & Shape(In)(Mm): 1.891 Outer Profile
Bore Type: Outer Tube Profile
Center Line To End Of Hub (In): 3.781
Driveline Series: W2400
Automotive
Neapco N3-3-1502KX Slip Yoke
N3-3-1502KX Driveshaft Slip Yoke
Center Line Uj To End Of Spline (In): 7.310
Center Line Uj To Face Of Washer(In): 1.240
Driveline Series: 1350
Dust Cap: 280195
Joint Angle (Degrees): 20.000
Lube Fitting Part Number: 0641-B
Spline Od(In)/No. Teeth: 1.375-16
Agricultural & Construction Machinery
Weasler 800-4424 Yoke
44 Series Setscrew Yoke
44 series yoke with round with keyway bore and setscrew connection
PTO drive shafts end with an implement yoke, it is the final connection between the PTO drive shaft and the machine or implement connected to the tractor. Weasler implement yokes are provided in a variety of bore and mounting options. Bore options include square, rectangle, hexagon, round and spline. Standard yoke connection options are set screws and pins. Additional implement yoke connection options include torque limiter flange yokes, telescoping yokes (square, round, and hexagon), and clamp yokes.
Reviews
There are no reviews yet.