TB Woods 10/3VP1060
TB Woods 10/3VP1060
Narrow, Premium Banded Belt, 10 Ribs, Belt Section 3V
Model: 10/3VP1060
Replaces several belts with the strength of a single belt. Banded belts feature a multiple layer tie band that provides excellent lateral rigidity to prevent belts from turning over or from coming off of the drive.
Description
Additional information
Asin | B078Y8LCSQ |
---|
Reviews (0)
Be the first to review “TB Woods 10/3VP1060” Cancel reply
Related products
Bushings & Bushed Bearings
TB Woods SH34 Sure-Grip Bushing
-
3/4 in. Bore, Quick Detachable Sure-Grip® Bushing, Size SH, Steel Material
Model: SH34
Sure-Grip® Quick Detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing’s position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters, and the mounting of different sheaves on the same shaft using the same bushing. - Quick disconnect bushing with a torque capacity of 3,500 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
- Split through flange and taper to provide strong clamping on the shaft
- Cast iron for resistance to wear, galling, and corrosion
- Keyed to the shaft to prevent the shaft from rotating in the bushing
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads
V-Belt Pulleys & Sheaves
TB Woods 2BK3478 V-Belt Sheave
FHP Sheave, B-5L-A-4L Belt Section, 3.75 O.D. in., 2 Grooves, Cast Iron Material
Model: 2BK3478
TB Wood’s light-duty sheaves are available in two types, both with one and two grooves. "AK" sheaves are made to accommodate A (4L) belts; "BK" sheaves are made for A (4L) or B (5L) belts. The two lines of sheaves have identical pitch diameters when using A or 4L belts. Wood’s light-duty sheaves can be equipped with Wood’s "QT" Sure-Grip QD-type bushings, quick-detachable tapered bushings that are split through flange and tapered surface to provide a true clamp that is comparable to a shrink fit.Bearings, Balls & Bushings
TB Woods QT12
TB Woods Type QT QT12 Sure-Grip Bushing
V-Belt Pulleys & Sheaves
TB Woods 5V852 Sheave
Narrow Sheave, 5V Belt Section, 8.5 O.D. in., 2 Grooves, Cast Iron Material
Model: 5V852
TB Wood’s Narrow (Ultra-V) sheaves include three cross sections: 3v, 5v and 8v and are constructed of fine grain, high tensile cast iron and have been carefully engineered to assure maximum performance over a long life span. For applications with special requirements, Wood’s sheaves are also available on a made-to-order basis in either cast or ductile iron, in Sure-Grip® or bored-to-suit construction.- Narrow V-belt sheave fits narrow profile V-belts for increased drive efficiency over classical V-belts
- Cast iron for resistance to wear and galling
- 5V belt or cross section
- Two grooves for multiple or banded belt use
Bearings, Balls & Bushings
TB Woods SK138
1 3/8 in. Bore, Quick Detachable Sure-Grip® Bushing, Size SK, Cast Iron Material
Model: SK138
Sure-Grip® Quick Detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing’s position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters, and the mounting of different sheaves on the same shaft using the same bushing.Couplings
TB Woods AL110114 jaw coupling
AL110 x 1-1/4 in. Bore, Aluminum Material
Model: AL110114
TB Wood's L-Jaw couplings are designed to meet high-quality standards while remaining affordable. Available with four insert materials and three hub materials, L-Jaw couplings are 100% interchangeable with industry-standard designs.Sheaves
TB Woods 2AK741 V-Belt Sheave
FHP Sheave, A-4L-3L Belt Section, 7.25 O.D. in., 2 Grooves, Cast Iron Material
Model: 2AK741
TB Wood’s light-duty sheaves are available in two types, both with one and two grooves. "AK" sheaves are made to accommodate A (4L) belts; "BK" sheaves are made for A (4L) or B (5L) belts. The two lines of sheaves have identical pitch diameters when using A or 4L belts. Wood’s light-duty sheaves can be equipped with Wood’s "QT" Sure-Grip QD-type bushings, quick-detachable tapered bushings that are split through flange and tapered surface to provide a true clamp that is comparable to a shrink fit.Couplings
TB Wood's L22545MM
L225 x 45 mm. Bore, Cast Iron Material
Model: L22545MM
TB Wood's L-Jaw couplings are designed to meet high-quality standards while remaining affordable. Available with four insert materials and three hub materials, L-Jaw couplings are 100% interchangeable with industry-standard designs.Couplings, Collars & Universal Joiners
TB Woods 11E Sleeve
11E EPDM Sleeve, Two-Piece Construction
Model: 11
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.Couplings, Collars & Universal Joiners
TB Woods 5J
5JE EPDM Sleeve, One-Piece Construction
Model: 5J
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.Tapered Locking Bushings
TB Woods TL302050MM Taper Bushing
50 mm. Bore, Taper-Lock™ Bushing, Size 3020, Steel Material
Model: TL302050MM
The Taper-Lock™ bushing system keeps the sprocket hubs narrow so the length-thru-bore dimension is less than ever before. The left-justified hub design allows shaft mounting close to bearings, keeping the center of load dimension small while preventing issues with high overhung loads.\n\nTaper-Lock™ bushings are split through the flange and gradual taper to provide a true clamp fit on the shaft that is the equivalent of a shrink fit.Couplings
TB Woods L07534 L-Jaw Coupling Hub
L075 x 3/4 in. Bore, Sinter Carbon Steel Material
Model: L07534
TB Wood's L-Jaw couplings are designed to meet high-quality standards while remaining affordable. Available with four insert materials and three hub materials, L-Jaw couplings are 100% interchangeable with industry-standard designs.V-Belt Pulleys & Sheaves
TB Woods 3V3.351 Sheave
Narrow Sheave, 3V Belt Section, 3.35 O.D. in., 1 Grooves, Cast Iron Material
Model: 3V3.351
TB Wood’s Narrow (Ultra-V) sheaves include three cross sections: 3v, 5v and 8v and are constructed of fine grain, high tensile cast iron and have been carefully engineered to assure maximum performance over a long life span. For applications with special requirements, Wood’s sheaves are also available on a made-to-order basis in either cast or ductile iron, in Sure-Grip® or bored-to-suit construction.Bushings & Bushed Bearings
TB Woods SDS12 Sure-Grip Bushing
1/2 in. Bore, Quick Detachable Sure-Grip® Bushing, Size SDS, Steel Material
Model: SDS12
Sure-Grip® Quick Detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing’s position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters, and the mounting of different sheaves on the same shaft using the same bushing.Bushings & Bushed Bearings
TB Woods TL251725MM
25 mm. Bore, Taper-Lock™ Bushing, Size 2517, Steel Material
Model: TL251725MM
The Taper-Lock™ bushing system keeps the sprocket hubs narrow so the length-thru-bore dimension is less than ever before. The left-justified hub design allows shaft mounting close to bearings, keeping the center of load dimension small while preventing issues with high overhung loads.\n\nTaper-Lock™ bushings are split through the flange and gradual taper to provide a true clamp fit on the shaft that is the equivalent of a shrink fit.Couplings, Collars & Universal Joiners
TB Woods 6E
TB Woods 6 Sure-Flex 2 Piece EPDM Sleeve
6E EPDM Sleeve, Two-Piece Construction
Model: 6
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.Couplings
TB Wood's WE20
Standard Two Piece Element, Polyether Urethane Material
Model: WE20
TB Wood’s Dura-Flex® couplings are designed from the ground up using finite element analysis to maximize flex life. Perfect for a wide variety of applications -- including those with uniform to heavy shock loads -- Dura-Flex® couplings employ a light weight element that absorbs shock loading and torsional vibration. These couplings are available in stock bore-to-size (BTS), Taper-Lock® and Sure-Grip® bushed (QD) hubs.Couplings, Collars & Universal Joiners
TB Woods 8JS
8JES EPDM Sleeve, Split Construction
Model: 8JS
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.Couplings
TB Woods 10HS Sleeve
10HS Hytrel Sleeve, Split Construction
Model: 10HS
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.Couplings
TB Woods 8H Sleeve
8H Hytrel Sleeve, One-Piece Construction
Model: 8H
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.Couplings
TB Woods 9H Sleeve
9H Hytrel Sleeve, One-Piece Construction
Model: 9H
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.Couplings, Collars & Universal Joiners
TB Woods 6J
6JE EPDM Sleeve, One-Piece Construction
Model: 6J
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.Bushings & Bushed Bearings
TB Wood SDS15/16 Sure-Grip Bushing
15/16 in. Bore, Quick Detachable Sure-Grip® Bushing, Size SDS, Steel Material
Model: SDS15/16
Sure-Grip® Quick Detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing’s position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters, and the mounting of different sheaves on the same shaft using the same bushing.Sheaves
Reviews
There are no reviews yet.