TB Woods 363B Sheave

Name: TB Woods 363B Sheave - Twin Spring Coupling - Universal joint, jaw coupling and elastomeric coupling replacements
SKU: B004KAA28Q
Price: 64.96 USD
Availability: InStock

Classical Sheave, A-B Belt Section, 3.95 O.D. in., 3 Grooves, Ductile Iron Material

Model: 363B

TB Wood’s Classical (also known as Conventional) V-belts include five cross sections: A, B, C, D, and E. These sections are a continuing development of the original V-belts of the 1930’s. A, B, C, and D belts are available in wrapped or cog construction and all are static conducting, and oil and heat resistant. (Note: E section V-belts are available for replacement on existing drives, but are not recommended for new drive designs.)

SKU: B004KAA28Q Category: Sheaves Tag: tb Woods

Description

TB Woods 363B Sheave

TB Woods 363B Classical V-Belt Sheave, B Belt Section, 3 Grooves, SH Bushing required, Ductile Iron, 3.95″ OD

Specifications

Product Family: Classical

Belt Section: A-B

Material Type: Ductile Iron

Outside Diameter (OD): 3.95 in

Number of Grooves: 3

Bushing: SH

RPM Upper Limit: 9,670 RPM

Datum Diameter: 3.60 in

Pitch Diameter: 4.01 in

Inside Diameter (ID): 1.82 in

Face Width (F): 2.50 in

Hub Location (K): 0.19 in

Balance: Standard, 1 plane

E Dimension: 1.63 in

L Dimension: 1.25 in

M Dimension: 0.38 in

Bore Type: Quick Disconnect Bushing

Inertia WR²: 0.05 lbs-ft²

Weight: 3.8 lbs

California Proposition 65: WARNING: Cancer- www.p65warnings.ca.gov

Documentation

TB Woods 363B Sheave

Industrial Couplings

Additional information

Asin	B004KAA28Q

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “TB Woods 363B Sheave” Cancel reply

Bearings, Balls & Bushings

TB Woods SK138

1 3/8 in. Bore, Quick Detachable Sure-Grip® Bushing, Size SK, Cast Iron Material

Model: SK138

Sure-Grip® Quick Detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing’s position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters, and the mounting of different sheaves on the same shaft using the same bushing.

Multi-Flex

TB Woods 9S218

9S x 2-1/8 in. BTS Flange, High Strength Cast Iron Material

Model: 9S218
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.

Couplings, Collars & Universal Joiners

TB Woods 6J

6JE EPDM Sleeve, One-Piece Construction

Model: 6J

Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.

Bushings & Bushed Bearings

TB Woods SDS12

TB Woods SDS12 Sure-Grip Bushing

1/2 in. Bore, Quick Detachable Sure-Grip® Bushing, Size SDS, Steel Material

Model: SDS12

Couplings, Collars & Universal Joiners

TB Woods 8JS

8JES EPDM Sleeve, Split Construction

Model: 8JS

Quick Disconnect Bushings

TB Woods SK13838KS

1 3/8 in. Bore, Quick Detachable Sure-Grip® Bushing, Size SK, Cast Iron Material

Model: SK13838KS

Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft
Split through flange and taper to provide strong clamping on shaft
Torque capacity of 7,000 in-lbs
Keyed to the shaft to prevent the shaft from rotating in the bushing
Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads

Couplings

TB Wood’s L22545MM

TB Wood's L22545MM

L225 x 45 mm. Bore, Cast Iron Material

Model: L22545MM

TB Wood's L-Jaw couplings are designed to meet high-quality standards while remaining affordable. Available with four insert materials and three hub materials, L-Jaw couplings are 100% interchangeable with industry-standard designs.

Couplings

TB Woods 10HS Sleeve

10HS Hytrel Sleeve, Split Construction

Model: 10HS

Bushings & Bushed Bearings

TB Wood SDS15/16 Sure-Grip Bushing

15/16 in. Bore, Quick Detachable Sure-Grip® Bushing, Size SDS, Steel Material

Model: SDS15/16

V-Belt Pulleys & Sheaves

TB Woods 5V852 Sheave

Narrow Sheave, 5V Belt Section, 8.5 O.D. in., 2 Grooves, Cast Iron Material

Model: 5V852

TB Wood’s Narrow (Ultra-V) sheaves include three cross sections: 3v, 5v and 8v and are constructed of fine grain, high tensile cast iron and have been carefully engineered to assure maximum performance over a long life span. For applications with special requirements, Wood’s sheaves are also available on a made-to-order basis in either cast or ductile iron, in Sure-Grip® or bored-to-suit construction.

Narrow V-belt sheave fits narrow profile V-belts for increased drive efficiency over classical V-belts
Cast iron for resistance to wear and galling
5V belt or cross section
Two grooves for multiple or banded belt use

Couplings

TB Woods AL110114 jaw coupling

AL110 x 1-1/4 in. Bore, Aluminum Material

Model: AL110114

TB Wood's G-Flex Grid Coupling Hub 1050T112

Couplings, Collars & Universal Joiners

TB Woods 1070T112

1070T X 1-1/2 G-Flex Grid Coupling Hub

Model: 1070T112

TB Wood’s Taper Grid Coupling is the industry standard, state-of-the-art design from TB Wood’s and Bibby Turboflex, the original grid coupling manufacturer. The G-Flex 1000 / Bibby 2000 Series is an all-metal coupling that provides positive protection against the damaging effects of shock loads and vibration. Aluminum horizontal cover (T10), and all-steel vertical cover (T20) designs are available. G-Flex tapered grid couplings are an excellent choice where torsional flexibility and vibration damping are primary concerns.

Couplings

TB Woods 4J Sure Flex Sleeve

4JE EPDM Sleeve, One-Piece Construction

Model: 4J

Bushings & Bushed Bearings

TB Woods SH34 Sure-Grip Bushing

3/4 in. Bore, Quick Detachable Sure-Grip® Bushing, Size SH, Steel Material

Model: SH34
Sure-Grip® Quick Detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing’s position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters, and the mounting of different sheaves on the same shaft using the same bushing.
Quick disconnect bushing with a torque capacity of 3,500 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
Split through flange and taper to provide strong clamping on the shaft
Cast iron for resistance to wear, galling, and corrosion
Keyed to the shaft to prevent the shaft from rotating in the bushing
Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads

Couplings

TB Woods 8SMPB

8S x 3/4 in. BTS Flange, No Keyseat, High Strength Cast Iron Material

Model: 8SMPB

Couplings

TB Woods 9HS

9HS Hytrel Sleeve, Split Construction

Model: 9HS

V-Belt Pulleys & Sheaves

TB Woods 2BK3478 V-Belt Sheave

FHP Sheave, B-5L-A-4L Belt Section, 3.75 O.D. in., 2 Grooves, Cast Iron Material

Model: 2BK3478

TB Wood’s light-duty sheaves are available in two types, both with one and two grooves. "AK" sheaves are made to accommodate A (4L) belts; "BK" sheaves are made for A (4L) or B (5L) belts. The two lines of sheaves have identical pitch diameters when using A or 4L belts. Wood’s light-duty sheaves can be equipped with Wood’s "QT" Sure-Grip QD-type bushings, quick-detachable tapered bushings that are split through flange and tapered surface to provide a true clamp that is comparable to a shrink fit.

Sheaves

TB Woods 2AK741 V-Belt Sheave

FHP Sheave, A-4L-3L Belt Section, 7.25 O.D. in., 2 Grooves, Cast Iron Material

Model: 2AK741

Couplings, Collars & Universal Joiners

TB Woods 1080T10CK

1080T10 Horizontal Cover Kit for G-Flex Couplings

Model: 1080T10CK

Couplings, Collars & Universal Joiners

TB Woods 5J

5JE EPDM Sleeve, One-Piece Construction

Model: 5J

Couplings

TB Woods 9H Sleeve

9H Hytrel Sleeve, One-Piece Construction

Model: 9H

Couplings, Collars & Universal Joiners

TB Woods 9S178

TB WOODS 9S178 Sure-Flex Flange Coupling 1-7/8IN D641216

9S x 1-7/8 in. BTS Flange, High Strength Cast Iron Material

Model: 9S178

Multi-Flex

TB Woods 4J x 2

4JE EPDM Sleeve, One-Piece Construction

Model: 4J

Bearings, Balls & Bushings

TB Woods QT12

TB Woods Type QT QT12 Sure-Grip Bushing

QT12

1/2 in. Bore, Quick Detachable Sure-Grip® Bushing, Size QT, Steel Material

MFR #QT12

TB Woods 363B Sheave