Meritor is a global supplier for commercial vehicle manufacturers for specialty industries with a wide range of aftermarket solutions from drivetrain to brake systems.
Description
Additional information
Asin | B088S6D57P |
---|---|
Dimensions | 6.13 x 2 x 1.25 inches |
Weight | 2.51 pounds |
Manufacturer | Meritor |
Reviews (0)
Be the first to review “SLIP YOKE” Cancel reply
Related products
Agricultural & Construction Machinery
Weasler 800-4424 Yoke
44 Series Setscrew Yoke
44 series yoke with round with keyway bore and setscrew connection
PTO drive shafts end with an implement yoke, it is the final connection between the PTO drive shaft and the machine or implement connected to the tractor. Weasler implement yokes are provided in a variety of bore and mounting options. Bore options include square, rectangle, hexagon, round and spline. Standard yoke connection options are set screws and pins. Additional implement yoke connection options include torque limiter flange yokes, telescoping yokes (square, round, and hexagon), and clamp yokes.Agricultural & Construction Machinery
Weasler 604-6343 Tubing
AB3 and AB4 series trilobe profile tube, clearance for uncoated tube
- Fits Series 3: U-Joint Cap Size: 27.0 MM / 1-1/16” (1.063) Cap to Cap: 70.0 MM / 2-3/4” (2.756). Fits Series 4: U-Joint Cap Size: 27.0 MM / 1-1/16” (1.063) Cap to Cap: 74.6 MM / 2-15/16” (2.937).
- 12508, 2006236, 2660600-6343, 274237, 3-03M1.5, 343-1603, 40357322, 500-248-66, 50024866, 600 6343, 600-6343, 6006343, 63354, 971-6006343, 716006343, BT43-3, BT433, PM600-6343, WYR4-21-3-125
- Bondioli/Pavesi 3 & 4 Series
- PTO
Agricultural & Construction Machinery
Weasler 807-3521 Yoke 35N Series
35 series yoke with 1 3/8-21 spline bore and clamp connection
The clamp yoke allows for a tight connection to a mating shaft to minimize fretting corrosion and wear, using standard hardware.Agricultural & Construction Machinery
Weasler 101-7620 Yoke
AW35 series yoke with 1 3/4-20 spline bore and safety slide lock connection
Agricultural & Construction Machinery
Weasler 302-5500 Shaft Weld Yoke
55 Series Weld Yoke
55 series yoke with 1 11/16-20 spline bore and weld connection
Weasler yoke weldment assemblies provide yoke to shaft and yoke to tube weldment options that are offered in both North American (domestic) , German, and Italian shaft and tube shapes.- Fits Series 55N: U-Joint Cap Size: 1-17/32” / 1.531” Cap to Cap: 4-5/16” / 4.313”.
- 2660302-5500, 302 5500, 302-5500, 3025500, 55N302-5500, 55N3025500, 971-3025500, 9713025500, PM302-5500
- 55N Series
- PTO
Agricultural & Construction Machinery
Weasler 200-8474 and 102-8406 kit
- Fits Series 4: U-Joint Cap Size: 27.0 MM / 1-1/16” (1.063) Cap to Cap: 74.6 MM / 2-15/16” (2.937). Fits Series 2300/210: U-Joint Cap Size: 27.0 MM 1-1/16” (1.063) / Cap to Cap: 74.6 MM / 2-15/16” (2.937).
- 200-8474, 102-8406
- Bondioli/Pavesi 4 & Walterscheid 2300/210 Series
- PTO
Agricultural & Construction Machinery
Weasler 11000648 Yoke and Tube Assembly
6 series yoke and tube, 3/4 x 7/8 rectangle
Agricultural & Construction Machinery
Weasler 102-1406 Yoke
14 series yoke with 1 3/8-6 spline bore and quick disconnect connection
PTO drive shafts start with a tractor yoke, the leading connection between the the tractor and the driveline. Weasler provides four types of Tractor Yokes: auto-lok, safety slide lock, spring-lok and quick disconnect. All yokes are compliant with ANSI/ASABE AD5673, ANSI/ASABE AD5674, ANSI/ASABE S604 and EN12965. For lawn and garden applications, specialized auto-lok and spring-lok yokes are available in addition to a male spline yoke. Agricultural tractor yokes are offered in 1 3/8″ 6-spline (type 1), 1 3/8″ 21-spline (type 2), and 1 3/4″ 20-spline (type 3) options to fit the specific tractor connection needed. Optionally 1 1/2″ 8-spline and 1 3/4″ 6-spline options are available. Lawn & Turf tractor yokes are offered in 1″ 10-spline and 1″ 15-spline.Agricultural & Construction Machinery
Weasler 102-4406 Yoke
PTO drive shafts start with a tractor yoke, the leading connection between the the tractor and the driveline. Weasler provides four types of Tractor Yokes: auto-lok, safety slide lock, spring-lok and quick disconnect. All yokes are compliant with ANSI/ASABE AD5673, ANSI/ASABE AD5674, ANSI/ASABE S604 and EN12965. For lawn and garden applications, specialized auto-lok and spring-lok yokes are available in addition to a male spline yoke. Agricultural tractor yokes are offered in 1 3/8″ 6-spline (type 1), 1 3/8″ 21-spline (type 2), and 1 3/4″ 20-spline (type 3) options to fit the specific tractor connection needed. Optionally 1 1/2″ 8-spline and 1 3/4″ 6-spline options are available. Lawn & Turf tractor yokes are offered in 1″ 10-spline and 1″ 15-spline.Yokes
- Fits 1310 Series U-Joints (3 1/4" Wide, 1 1/16" Cap Diameter)
- For 1310 Series Double Cardan CV Driveshafts
- Center to Center of U-Joints: 2.69"
- Interchangeable with Spicer 2-26-497 H Yoke
Agricultural & Construction Machinery
Weasler 800-8311 Yoke
AB3 and AW11 series yoke with round with keyway bore and setscrew connection
- Fits Series 3: U-Joint Cap Size: 27.0 MM / 1-1/16” (1.063) Cap to Cap: 70.0 MM / 2-3/4” (2.756). Fits Series I: U-Joint Cap Size: 27.0 MM / 1-1/16” (1.063) Cap to Cap: 70.0 MM / 2-3/4” (2.756).
- 212038751, 2660800-8311, 40585322, 500-249-14, 50024914, 800 8311, 800-8311, 8008311, 971-8008311, 9718008311, BYR3113138, PM800-8311, WYR3113138
- Bondioli/Pavesi 3 & Walterscheid I Series
- PTO
Agricultural & Construction Machinery
Weasler 700-6443 Yoke
AB4 series yoke with 43 mm trilobe bore and roll pin connection
Shaft yokes (or inner profile yokes) connect the cross and bearing kits to the telescoping shaft or inner tube. Tube yokes (or outer profile yokes), connect the other cross and bearing kits to the opposite side of the telescoping shaft or outer tube. Weasler provides both domestic (North American) and Weasler Profile metric shaft and tube yoke connection options. Domestic yokes are provided as square, rectangle, hexagon or splined in shape. Weasler Profile metric yokes are provided as lemon, star, or trilobe in shape.Agricultural & Construction Machinery
Weasler 10001448 Yoke
14 series yoke and shaft, 1 x 1 1/8 square
Weasler yoke weldment assemblies provide yoke to shaft and yoke to tube weldment options that are offered in both North American (domestic) , German, and Italian shaft and tube shapes.Agricultural & Construction Machinery
Weasler 102-3506 Yoke
35 series yoke with 1 3/8-6 spline bore and quick disconnect connection
PTO drive shafts start with a tractor yoke, the leading connection between the the tractor and the driveline. Weasler provides four types of Tractor Yokes: auto-lok, safety slide lock, spring-lok and quick disconnect. All yokes are compliant with ANSI/ASABE AD5673, ANSI/ASABE AD5674, ANSI/ASABE S604 and EN12965. For lawn and garden applications, specialized auto-lok and spring-lok yokes are available in addition to a male spline yoke. Agricultural tractor yokes are offered in 1 3/8″ 6-spline (type 1), 1 3/8″ 21-spline (type 2), and 1 3/4″ 20-spline (type 3) options to fit the specific tractor connection needed. Optionally 1 1/2″ 8-spline and 1 3/4″ 6-spline options are available. Lawn & Turf tractor yokes are offered in 1″ 10-spline and 1″ 15-spline.Automotive
Spicer 211342X Socket Yoke Assembly
DOUBLE CARDAN CV DRIVESHAFT CENTERING YOKE- Fits 1984 BRONCO II with 1210 series yoke style rear output on transfer case
- Fits 1983 to 1985 RANGER 4X4 with 1210 series yoke style rear output on transfer case
- 1210 series
- 2.438 inches between Locating Tabs
- 1.062 inch bearing caps
- Outside Snap Rings Style
- Greaseable
Agricultural & Construction Machinery
Weasler 807-3520 Yoke
35 series yoke with 1 3/4-20 spline bore and clamp connection
The clamp yoke allows for a tight connection to a mating shaft to minimize fretting corrosion and wear, using standard hardware.Automotive
Spicer 211179X Centering Yoke
SPICER 211179X CV Driveshaft Centering Yoke 1330 series
- 1979 to 1989 Bronco
- 1979 F-150, F-250, F-350
-
Fits 1330 Series CV Driveshaft
-
Use on any 1330 series CV Driveshaft to repair or rebuild Double Cardan Joint
-
Fits ALL with 3 5/8 inches between Tabs in centering Yoke
-
GREASEABLEcenter ball socket
-
New spring Included
-
Centering Yoke Fits 1330 Series Universal Joint
-
Dimension between locating tabs on centering yoke is (3.625 inches) 3 5/8 inches
-
Designed to fit (1.062 inches) 1 1/16 inch U-Joint Bearing cap
-
Reviews
There are no reviews yet.