Weasler 800-8311 Yoke

AB3 and AW11 series yoke with round with keyway bore and setscrew connection

Fits Series 3: U-Joint Cap Size: 27.0 MM / 1-1/16” (1.063) Cap to Cap: 70.0 MM / 2-3/4” (2.756). Fits Series I: U-Joint Cap Size: 27.0 MM / 1-1/16” (1.063) Cap to Cap: 70.0 MM / 2-3/4” (2.756).
212038751, 2660800-8311, 40585322, 500-249-14, 50024914, 800 8311, 800-8311, 8008311, 971-8008311, 9718008311, BYR3113138, PM800-8311, WYR3113138
Bondioli/Pavesi 3 & Walterscheid I Series
PTO

SKU: B07GNPTFGH Categories: Agricultural & Construction Machinery, Spare & Replacement Parts, Yokes Tags: Agriculture, Weasler, yoke

Description

Weasler 800-8311 Yoke

Weasler 800-8311 1-3/8″ Round Bore 5/16″ Keyway and Set Screw Implement Yoke I and 3 Series

AB3 and AW11 Series Setscrew Yoke Specifications

Spec.	Imperial	Metric
Bore 1	1.37 inches	35 mm
Bore 1	ROUND WITH KEYWAY
Connection 1	SETSCREW
Height	3.48 inches	88 mm
HP@1000RPM	58 HP	43 kilowatts
HP@540RPM	38 HP	28 kilowatts
Keyway 1	0.31 inches	8 mm
Length	3.62 inches	92 mm
Setscrew	3/8-16
Shipping Dimensions	4.43″ L × 3.48″ H × 2.17″ W	11cm L × 9cm H × 6cm W
Shipping Volume	33.45 in³	548 cm³
Shipping Weight	2.24 pounds	1 kilograms
Weight	2.24 pounds	1 kilograms
Width	2.17 inches	55 mm

Fits Series 3: U-Joint Cap Size: 27.0 MM / 1-1/16” (1.063) Cap to Cap: 70.0 MM / 2-3/4” (2.756). Fits Series I: U-Joint Cap Size: 27.0 MM / 1-1/16” (1.063) Cap to Cap: 70.0 MM / 2-3/4” (2.756).

Weasler 800-8311 Yoke

Additional information

Asin	B07GNPTFGH

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Weasler 800-8311 Yoke” Cancel reply

Agricultural & Construction Machinery

Weasler 10000648 Yoke and Shaft

6 series yoke and shaft, 3/4 x 7/8 rectangle

Weasler yoke weldment assemblies provide yoke to shaft and yoke to tube weldment options that are offered in both North American (domestic) , German, and Italian shaft and tube shapes.

Agricultural & Construction Machinery

Weasler 102-4406 Yoke

PTO drive shafts start with a tractor yoke, the leading connection between the the tractor and the driveline. Weasler provides four types of Tractor Yokes: auto-lok, safety slide lock, spring-lok and quick disconnect. All yokes are compliant with ANSI/ASABE AD5673, ANSI/ASABE AD5674, ANSI/ASABE S604 and EN12965. For lawn and garden applications, specialized auto-lok and spring-lok yokes are available in addition to a male spline yoke. Agricultural tractor yokes are offered in 1 3/8″ 6-spline (type 1), 1 3/8″ 21-spline (type 2), and 1 3/4″ 20-spline (type 3) options to fit the specific tractor connection needed. Optionally 1 1/2″ 8-spline and 1 3/4″ 6-spline options are available. Lawn & Turf tractor yokes are offered in 1″ 10-spline and 1″ 15-spline.

Agricultural & Construction Machinery

Weasler 404-0019 Square Shaft

35 series square shaft, 1 3/16 square

Shafts are a metal bar located at the center or the PTO drive shaft, shafts define the length of given PTO driveshaft as well as provide connections to the various yoke attachments. Weasler shafting is available in both domestic (North American) and metric profile shapes. Domestic shafting is provided as square, rectangle, hex or splined. The Weasler Profile product line includes metric shafting in both German and Italian styling: German style provided as lemon or star in shape and Italian as trilobed in shape.

Agricultural & Construction Machinery

Weasler 800-4424 Yoke

44 Series Setscrew Yoke

44 series yoke with round with keyway bore and setscrew connection

PTO drive shafts end with an implement yoke, it is the final connection between the PTO drive shaft and the machine or implement connected to the tractor. Weasler implement yokes are provided in a variety of bore and mounting options. Bore options include square, rectangle, hexagon, round and spline. Standard yoke connection options are set screws and pins. Additional implement yoke connection options include torque limiter flange yokes, telescoping yokes (square, round, and hexagon), and clamp yokes.

Agricultural & Construction Machinery

Weasler 800-1424 Yoke

14 Series Setscrew Yoke

14 series yoke with round with keyway bore and setscrew connection

PTO drive shafts end with an implement yoke, it is the final connection between the PTO drive shaft and the machine or implement connected to the tractor. Weasler implement yokes are provided in a variety of bore and mounting options. Bore options include square, rectangle, hexagon, round and spline. Standard yoke connection options are set screws and pins. Additional implement yoke connection options include torque limiter flage yokes, telescoping yokes (square, round, and hexagon), and clamp yokes.

Agricultural & Construction Machinery

Weasler 200-4400 Cross & Bearing Kit

44 series cross and bearing kit, r standard, center grease fitting, snap ring in cup

R-Kits are standard and offer a highquality lube cycle of 8 hours which is acceptable for many applications. R-kits and E-kits are interchangeable for all available Weasler series as well as with standard cross and bearing sets in the market. This means that a Weasler PTO drive shaft with R-kits can still be upgraded to E-kits or M-kits. PERFORMANCE BENEFITS Lubrication cycle of up to 8 hours. Interchangeable with standard North American cross and bearing kits available in the market. DESIGN FEATURES A black seal with grease fitting makes it fast and easy to find a P-Kit.

Shafts

Weasler 604-6552 Tubing

Trilobe Profile Tube

Tubes serve as a metal cylindrical encasement for a shaft within a given PTO drive shaft, and provides supplemental reinfocement to the drive shaft. Tubing is available in both domestic (North American) and metric profile shapes. Domestic tubing is provided as square, rectangle, or round. The Weasler Profile product line includes metric and tubing available in both German and Italian styling: German style provided as lemon or star in shape and Italian as trilobed in shape.

Agricultural & Construction Machinery

Weasler 102-3506 Yoke

35 series yoke with 1 3/8-6 spline bore and quick disconnect connection

Agricultural & Construction Machinery

Weasler 604-7241 Tubing

AW11,AW20,AW21 series lemon profile tube, clearance for uncoated tube

Tubes serve as a metal cylindrical encasement for a shaft within a given PTO drive shaft, and provides supplemental reinforcement to the drive shaft. Tubing is available in both domestic (North American) and metric profile shapes. Domestic tubing is provided as square, rectangle, or round. The Weasler Profile product line includes metric and tubing available in both German and Italian styling: German style provided as lemon or star in shape and Italian as trilobed in shape.

Agricultural & Construction Machinery

Weasler 200-7004 Cross & Bearing Kit

AW26 series cross and bearing kit, p standard, center grease fitting

P-Kits are the Weasler Profile metric version of the R-Kit. P-Kits are standard and offer a highquality lube cycle of 8 hours which is acceptable for many applications. P-kits and E-kits are interchangeable with other cross and bearing kits in Weasler series as well as with standard cross and bearing sets in the market. This means that a Weasler PTO drive shaft with P-kits can still be upgraded to E-kits or M-kits. PERFORMANCE BENEFITS Lubrication cycle of up to 8 hours. Interchangeable with standard profile metric cross and bearing kits available in the market. DESIGN FEATURES A blue seal with grease fitting makes it fast and easy to find a P-Kit.

Agricultural & Construction Machinery

2 of Weasler 200-8370

Series	2100
Snap Ring Type	OSR
Bearing Diameter	22.0 mm (.8661)
Cap To Cap Overall Length	54.8 mm (2.158)
Rated HP at 540 RPM	16
Rated HP at 1000 RPM	23
Greaseable	Y

Agricultural & Construction Machinery

Weasler 807-3520 Yoke

35 series yoke with 1 3/4-20 spline bore and clamp connection

The clamp yoke allows for a tight connection to a mating shaft to minimize fretting corrosion and wear, using standard hardware.

Agricultural & Construction Machinery

Weasler 604-6343 Tubing

AB3 and AB4 series trilobe profile tube, clearance for uncoated tube

Fits Series 3: U-Joint Cap Size: 27.0 MM / 1-1/16” (1.063) Cap to Cap: 70.0 MM / 2-3/4” (2.756). Fits Series 4: U-Joint Cap Size: 27.0 MM / 1-1/16” (1.063) Cap to Cap: 74.6 MM / 2-15/16” (2.937).
12508, 2006236, 2660600-6343, 274237, 3-03M1.5, 343-1603, 40357322, 500-248-66, 50024866, 600 6343, 600-6343, 6006343, 63354, 971-6006343, 716006343, BT43-3, BT433, PM600-6343, WYR4-21-3-125
Bondioli/Pavesi 3 & 4 Series
PTO

Agricultural & Construction Machinery

Weasler 804-3516 Yoke

PTO drive shafts end with an implement yoke, it is the final connection between the PTO drive shaft and the machine or implement connected to the tractor. Weasler implement yokes are provided in a variety of bore and mounting options. Bore options include square, rectangle, hexagon, round and spline. Standard yoke connection options are set screws and pins. Additional implement yoke connection options include torque limiter flage yokes, telescoping yokes (square, round, and hexagon), and clamp yokes.

Fits Series 35N: U-Joint Cap Size: 1-1/4” / 1.250” Cap to Cap: 3-7/32” / 3.219”.
21125, 340-3550, 3403550, 35N160-26, 35N16026, 471-160, 471160, 8043516, 804 3516, 971-8043516, 9718043516
35N Series
PTO

Agricultural & Construction Machinery

2 of Weasler 200-0675 Cross & Bearing Kit

Agricultural & Construction Machinery

Weasler 200-8692 Cross & Bearing Kit Bypy 6

4-80,AB6,AW22 series cross and bearing kit, p standard, center grease fitting

P-Kits are the Weasler Profile metric version of the R-Kit. P-Kits are standard and offer a high quality lube cycle of 8 hours which is acceptable for many applications. P-kits and E-kits are interchangeable with other cross and bearing kits in Weasler series as well as with standard cross and bearing sets in the market. This means that a Weasler PTO drive shaft with P-kits can still be upgraded to E-kits or M-kits. PERFORMANCE BENEFITS Lubrication cycle of up to 8 hours. Interchangeable with standard profile metric cross and bearing kits available in the market. DESIGN FEATURES A blue seal with grease fitting makes it fast and easy to find a P-Kit.

Agricultural & Construction Machinery

Weasler 200-3500 Cross & Bearing Kit

35 series cross and bearing kit, r standard, center grease fitting

PERFORMANCE BENEFITS Lubrication cycle of up to 8 hours. Interchangeable with standard North American cross and bearing kits available in the market. DESIGN FEATURES A black seal with grease fitting makes it fast and easy to find a P-Kit.

Agricultural & Construction Machinery

Weasler 801-1206 Yoke

12 series yoke with 1 3/8-6 spline bore and pin connection

Agricultural & Construction Machinery

Weasler 701-3500 Yoke

35 series yoke with solid bore and weld connection

Weasler yoke weldment assemblies provide yoke to shaft and yoke to tube weldment options that are offered in both North American (domestic) , German, and Italian shaft and tube profiles.

Fits Series 35N: U-Joint Cap Size: 1-1/4” / 1.250” Cap to Cap: 3-7/32” / 3.219”.
211F2, 22-1325, 221325, 340-3566, 3403566, 35NWY1885, 471-885, 471885, 701 3500, 701-3500, 7013500, 971-7013500, 9717013500, PM701-3500
PTO

Agricultural & Construction Machinery

Weasler 11000648 Yoke and Tube Assembly

6 series yoke and tube, 3/4 x 7/8 rectangle

Agricultural & Construction Machinery

Weasler 200-8474 and 102-8406 kit

Fits Series 4: U-Joint Cap Size: 27.0 MM / 1-1/16” (1.063) Cap to Cap: 74.6 MM / 2-15/16” (2.937). Fits Series 2300/210: U-Joint Cap Size: 27.0 MM 1-1/16” (1.063) / Cap to Cap: 74.6 MM / 2-15/16” (2.937).
200-8474, 102-8406
Bondioli/Pavesi 4 & Walterscheid 2300/210 Series
PTO

Agricultural & Construction Machinery

Weasler 200-1400 Cross & Bearing Kit

14 series cross and bearing kit, r standard, center grease fitting

R-Kits are standard and offer a high quality lube cycle of 8 hours which is acceptable for many applications. R-kits and E-kits are interchangeable for all available Weasler series as well as with standard cross and bearing sets in the market. This means that a Weasler PTO drive shaft with R-kits can still be upgraded to E-kits or M-kits. PERFORMANCE BENEFITS Lubrication cycle of up to 8 hours. Interchangeable with standard North American cross and bearing kits available in the market. DESIGN FEATURES A black seal with grease fitting makes it fast and easy to find a P-Kit.

Agricultural & Construction Machinery

Weasler 105-0610 Yoke

6 series yoke with 1-10 spline bore and spring-lok connection

Agricultural & Construction Machinery

Weasler 806-1420 Yoke

14 series yoke with round with 2 keyways bore and setscrew connection

PTO drive shafts end with an implement yoke, it is the final connection between the PTO drive shaft and the machine or implement connected to the tractor. Weasler implement yokes are provided in a variety of bore and mounting options. Bore options include square, rectangle, hexagon, round and spline. Standard yoke connection options are set screws and pins. Additional implement yoke connection options include torque limiter flage yokes, telescoping yokes (square, round, and hexagon), and clamp yokes.

Fits Series 14N: U-Joint Cap Size: 1-1/8” / 1.125” Cap to Cap: 2-5/8” / 2.625”.
14N2045-37, 14N204537, 2660806-1420, 806 1420, 8061420, 971-8061420,9718061420, PM806-1420
14N Series
PTO

Weasler 800-8311 Yoke