The Hercuflex coupling has increased nominal torque, larger maximum bore size and longer service life. It is interchangeable with standard AGMA flange interface.
Lovejoy 69790428414 HERCUFLEX FX Series 28414 FX 2.5E Steel Coupling, Length Through Bore 6.25", 3-13/16" x 3-13/16" Bore, 8.38" OD, 1" x 1/2" Keyway Both Ends
Description
Additional information
| Asin | B010HSDQ96 |
|---|---|
| Dimensions | |
| Weight | |
| Manufacturer |
Reviews (0)
Be the first to review “Lovejoy 69790428414 HERCUFLEX FX Series 28414 FX 2.5E Steel Coupling, Length Through Bore 6.25", 3-13/16" x 3-13/16" Bore, 8.38" OD, 1" x 1/2" Keyway Both Ends”
Related products
- Shrouded metric bolts
- Unequaled bore and torque capacity
- 1.5° of misalignment per gear mesh
- Improved fastener corrosion resistance
- Advanced seal design intensifying contamination resistance
- Unequaled bore and torque capacity
- 1.5° of misalignment per gear mesh
- Improved fastener corrosion resistance
- Advanced seal design intensifying contamination resistance
- Shrouded metric bolts
- Unequaled bore and torque capacity
- 1.5° of misalignment per gear mesh
- Improved fastener corrosion resistance
- Advanced seal design intensifying contamination resistance
- Shrouded metric bolts
- Unequaled bore and torque capacity
- 1.5° of misalignment per gear mesh
- Improved fastener corrosion resistance
- Advanced seal design intensifying contamination resistance
- Shrouded metric bolts
- Unequaled bore and torque capacity
- 1.5° of misalignment per gear mesh
- Improved fastener corrosion resistance
- Advanced seal design intensifying contamination resistance
Gear & Sleeve
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
Specifications
Description |
8E SLEEVE |
Coupling Size |
8E |
Sleeve Type |
E |
Type |
Sleeves for S-Flex Endurance Couplings |
Material |
EPDM |
Color |
Black |
Connection Type A x B |
Coupling Sleeve |
Weight |
1.15 lb |
Nominal Torque |
1475 in·lb166.66 N·m |
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
- Lovejoy offers flexible sleeves for S-Flex Endurance couplings in three designs: one-piece solid, one-piece split, and two-piece with retaining ring
- The one-piece split design provides solutions for applications with unique requirements where small shaft separations inhibit the installation of a one-piece solid sleeve
- Pre-molded teeth along the diameter of the sleeve engage with teeth of the coupling flanges
- No clamps or screws are needed to connect the flanges with the
Reviews
There are no reviews yet.