TB Woods 1000XXH500
TB Woods 1000XXH500
Timing Belt, 5. Width, 100 in. Pitch Length
Model: 1000XXH500
TB Wood’s timing belt drives are a highly efficient job-proved medium for mechanical power transmission. These drives combine the advantages of chain and gear drives with the advantages of belted drives, without the limitations usually associated with these drives. Timing belt drives deliver savings in weight, space and construction without a sacrifice in efficiency, and they are adaptable to almost any kind of power transmission drive.
Description
Additional information
Asin | B078YC1SMD |
---|
Reviews (0)
Be the first to review “TB Woods 1000XXH500” Cancel reply
Related products
Bushings & Bushed Bearings
TB Woods SH34 Sure-Grip Bushing
-
3/4 in. Bore, Quick Detachable Sure-Grip® Bushing, Size SH, Steel Material
Model: SH34
Sure-Grip® Quick Detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing’s position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters, and the mounting of different sheaves on the same shaft using the same bushing. - Quick disconnect bushing with a torque capacity of 3,500 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
- Split through flange and taper to provide strong clamping on the shaft
- Cast iron for resistance to wear, galling, and corrosion
- Keyed to the shaft to prevent the shaft from rotating in the bushing
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads
Couplings
8S x 3/4 in. BTS Flange, No Keyseat, High Strength Cast Iron Material
Model: 8SMPB
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.Bearings, Balls & Bushings
TB Woods SK138
1 3/8 in. Bore, Quick Detachable Sure-Grip® Bushing, Size SK, Cast Iron Material
Model: SK138
Sure-Grip® Quick Detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing’s position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters, and the mounting of different sheaves on the same shaft using the same bushing.Bushings & Bushed Bearings
TB Woods Type JA34 Sure-Grip Bushing
3/4 in. Bore, Quick Detachable Sure-Grip® Bushing, Size JA, Steel Material
Model: JA34
Sure-Grip® Quick Detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing’s position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters, and the mounting of different sheaves on the same shaft using the same bushing.Multi-Flex
TB Woods 9S218
-
9S x 2-1/8 in. BTS Flange, High Strength Cast Iron Material
Model: 9S218
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.
Couplings
TB Woods 9HS
9HS Hytrel Sleeve, Split Construction
Model: 9HS
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.Couplings
TB Woods 9H Sleeve
9H Hytrel Sleeve, One-Piece Construction
Model: 9H
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.Couplings
TB Woods 8H Sleeve
8H Hytrel Sleeve, One-Piece Construction
Model: 8H
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.Couplings, Collars & Universal Joiners
TB Woods 8JS
8JES EPDM Sleeve, Split Construction
Model: 8JS
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.Couplings, Collars & Universal Joiners
TB Woods 6E
TB Woods 6 Sure-Flex 2 Piece EPDM Sleeve
6E EPDM Sleeve, Two-Piece Construction
Model: 6
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.Bushings & Bushed Bearings
TB Wood SDS15/16 Sure-Grip Bushing
15/16 in. Bore, Quick Detachable Sure-Grip® Bushing, Size SDS, Steel Material
Model: SDS15/16
Sure-Grip® Quick Detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing’s position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters, and the mounting of different sheaves on the same shaft using the same bushing.Couplings, Collars & Universal Joiners
TB Woods 1080T10CK
1080T10 Horizontal Cover Kit for G-Flex Couplings
Model: 1080T10CK
TB Wood’s Taper Grid Coupling is the industry standard, state-of-the-art design from TB Wood’s and Bibby Turboflex, the original grid coupling manufacturer. The G-Flex 1000 / Bibby 2000 Series is an all-metal coupling that provides positive protection against the damaging effects of shock loads and vibration. Aluminum horizontal cover (T10), and all-steel vertical cover (T20) designs are available. G-Flex tapered grid couplings are an excellent choice where torsional flexibility and vibration damping are primary concerns.Couplings, Collars & Universal Joiners
TB Woods 6J
6JE EPDM Sleeve, One-Piece Construction
Model: 6J
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.V-Belt Pulleys & Sheaves
TB Woods 3V3.351 Sheave
Narrow Sheave, 3V Belt Section, 3.35 O.D. in., 1 Grooves, Cast Iron Material
Model: 3V3.351
TB Wood’s Narrow (Ultra-V) sheaves include three cross sections: 3v, 5v and 8v and are constructed of fine grain, high tensile cast iron and have been carefully engineered to assure maximum performance over a long life span. For applications with special requirements, Wood’s sheaves are also available on a made-to-order basis in either cast or ductile iron, in Sure-Grip® or bored-to-suit construction.Couplings, Collars & Universal Joiners
TB Woods 6HS
6HS Hytrel Sleeve, Split Construction
Model: 6HS
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.Couplings
TB Woods 10HS Sleeve
10HS Hytrel Sleeve, Split Construction
Model: 10HS
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.Couplings, Collars & Universal Joiners
TB Woods 9S112
9S x 1-1/2 in. BTS Flange, High Strength Cast Iron Material
Model: 9S112
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.Sheaves
TB Woods 2AK741 V-Belt Sheave
FHP Sheave, A-4L-3L Belt Section, 7.25 O.D. in., 2 Grooves, Cast Iron Material
Model: 2AK741
TB Wood’s light-duty sheaves are available in two types, both with one and two grooves. "AK" sheaves are made to accommodate A (4L) belts; "BK" sheaves are made for A (4L) or B (5L) belts. The two lines of sheaves have identical pitch diameters when using A or 4L belts. Wood’s light-duty sheaves can be equipped with Wood’s "QT" Sure-Grip QD-type bushings, quick-detachable tapered bushings that are split through flange and tapered surface to provide a true clamp that is comparable to a shrink fit.Couplings
TB WOODS 10J SLEEVE
10JE EPDM Sleeve, One-Piece Construction
Model: 10J
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.V-Belt Pulleys & Sheaves
TB Woods 2BK3478 V-Belt Sheave
FHP Sheave, B-5L-A-4L Belt Section, 3.75 O.D. in., 2 Grooves, Cast Iron Material
Model: 2BK3478
TB Wood’s light-duty sheaves are available in two types, both with one and two grooves. "AK" sheaves are made to accommodate A (4L) belts; "BK" sheaves are made for A (4L) or B (5L) belts. The two lines of sheaves have identical pitch diameters when using A or 4L belts. Wood’s light-duty sheaves can be equipped with Wood’s "QT" Sure-Grip QD-type bushings, quick-detachable tapered bushings that are split through flange and tapered surface to provide a true clamp that is comparable to a shrink fit.Tapered Locking Bushings
TB Woods TL302050MM Taper Bushing
50 mm. Bore, Taper-Lock™ Bushing, Size 3020, Steel Material
Model: TL302050MM
The Taper-Lock™ bushing system keeps the sprocket hubs narrow so the length-thru-bore dimension is less than ever before. The left-justified hub design allows shaft mounting close to bearings, keeping the center of load dimension small while preventing issues with high overhung loads.\n\nTaper-Lock™ bushings are split through the flange and gradual taper to provide a true clamp fit on the shaft that is the equivalent of a shrink fit.V-Belt Pulleys & Sheaves
TB Woods 5V852 Sheave
Narrow Sheave, 5V Belt Section, 8.5 O.D. in., 2 Grooves, Cast Iron Material
Model: 5V852
TB Wood’s Narrow (Ultra-V) sheaves include three cross sections: 3v, 5v and 8v and are constructed of fine grain, high tensile cast iron and have been carefully engineered to assure maximum performance over a long life span. For applications with special requirements, Wood’s sheaves are also available on a made-to-order basis in either cast or ductile iron, in Sure-Grip® or bored-to-suit construction.- Narrow V-belt sheave fits narrow profile V-belts for increased drive efficiency over classical V-belts
- Cast iron for resistance to wear and galling
- 5V belt or cross section
- Two grooves for multiple or banded belt use
Bushings & Bushed Bearings
TB Woods TL251725MM
25 mm. Bore, Taper-Lock™ Bushing, Size 2517, Steel Material
Model: TL251725MM
The Taper-Lock™ bushing system keeps the sprocket hubs narrow so the length-thru-bore dimension is less than ever before. The left-justified hub design allows shaft mounting close to bearings, keeping the center of load dimension small while preventing issues with high overhung loads.\n\nTaper-Lock™ bushings are split through the flange and gradual taper to provide a true clamp fit on the shaft that is the equivalent of a shrink fit.Bearings, Balls & Bushings
Reviews
There are no reviews yet.