| Asin | B00RW7LQF2 |
|---|---|
| Dimensions | |
| Weight | |
| Manufacturer |
Sew-Eurodrive S72DT90S4VS Motor 3.28/1.88A 330/575V
Additional information
Reviews (0)
Be the first to review “Sew-Eurodrive S72DT90S4VS Motor 3.28/1.88A 330/575V”
Related products
- Weight: 61.42lb
- Product Dimensions: 20.00 x 9.00 x 12.00 inches
- Condition: Used - Good
Industrial Motors
Baldor Reliance CEM3616T
Performance at 460 V, 60 Hz, 7.5 hp
Typical performance; not guaranteed values.General Characteristics
Full Load Torque 0 LB-FT
No-Load Current 0 A
Line-Line Res. @ 25° C 1.43 Ohms A Ph / 0 Ohms B Ph
Temp. Rise @ Rated Load 74° C
Temp. Rise @ S.F. Load92° C
Start Configuration DOL
Break-Down Torque 57.9 LB-FT
Pull-Up Torque 39.9 LB-FT
Locked-Rotor Torque 48.2 LB-FT
Starting Current 91 A
Load Characteristics
| Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. |
|---|---|---|---|---|---|---|---|---|
| Power Factor | 10.0 | 64.0 | 85.0 | 90.0 | 93.0 | 94.0 | 94.0 | 94.0 |
| Efficiency | 0.0 | 86.9 | 90.6 | 91.0 | 90.1 | 88.8 | 86.5 | 89.3 |
| Speed (RPM) | 3,595 | 3,571 | 3,539 | 3,505 | 3,468 | 3,429 | 3,385 | 3,445 |
| Line Amps | 2.33 | 3.14 | 4.59 | 6.43 | 8.43 | 10.50 | 12.90 | 9.67 |
- Weight: 300.83lb
- Product Dimensions: 32.00 x 15.00 x 10.00 inches
- Condition: Used - Like New
Complete Motors
Bison PowerSTAR 027-730K0080
- shaft type: Right Angle
- ip rating: IP54
- input horsepower: 1/3 hp
- duty cycle: Continuous
- motor phase: 3 ph
Industrial Motors
- Weight: 49.50lb
- Product Dimensions: 16.00 x 8.00 x 9.00 inches
- Condition: New
Industrial Motors
Baldor Reliance 36-1749 C Face Kit
- Complete kits with all hardware necessary for converting Baldor-Reliance 56 through 445T frame rigid base motors to C-Face mounting with base
- For use with Legacy Baldor-Reliance Motor Designs.
Reviews
There are no reviews yet.