PN: R40DT80N4 Amps: 3.7/1.9Duty: ContinuousHP: 1Hz: 60Insulation Class: FMtg: M3 TB-270 Ce3PF: 0.69Phase: 3Ratio: 9.65:1Rise: 105° CRPM: 176Volts: 230/460Discontinued By Manufacturer
Description
Additional information
Asin | B082H3LKSB |
---|---|
Dimensions | |
Weight | |
Manufacturer |
Reviews (0)
Be the first to review “Sew Eurodrive R40DT80N4 Motor 176 RPM 1HP” Cancel reply
Related products
Complete Motors
Bison PowerSTAR 027-730K0080
- shaft type: Right Angle
- ip rating: IP54
- input horsepower: 1/3 hp
- duty cycle: Continuous
- motor phase: 3 ph
Industrial Motors
Baldor Reliance 36-1749 C Face Kit
- Complete kits with all hardware necessary for converting Baldor-Reliance 56 through 445T frame rigid base motors to C-Face mounting with base
- For use with Legacy Baldor-Reliance Motor Designs.
- Weight: 33.00lb
- Product Dimensions: 14.00 x 6.00 x 8.00 inches
- Condition: Used - Like New
- Weight: 61.42lb
- Product Dimensions: 20.00 x 9.00 x 12.00 inches
- Condition: Used - Good
Electric Motors
Baldor Reliance EM30004
Performance at 460 V, 60 Hz, 0.25 hp
Typical performance; not guaranteed values.General Characteristics
Full Load Torque0 LB-FT
No-Load Current0 A
Line-Line Res. @ 25° C55.4 Ohms A Ph / 0 Ohms B Ph
Temp. Rise @ Rated Load37° C
Temp. Rise @ S.F. Load43° C
Start ConfigurationDOL
Break-Down Torque5.98 LB-FT
Pull-Up Torque3.59 LB-FT
Locked-Rotor Torque4.66 LB-FT
Starting Current3.58 A
Load Characteristics
Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. |
---|---|---|---|---|---|---|---|---|
Power Factor | 12.0 | 22.0 | 31.0 | 39.0 | 47.0 | 54.0 | 60.0 | 56.0 |
Efficiency | 0.0 | 42.6 | 57.9 | 65.1 | 68.7 | 70.8 | 71.3 | 71.0 |
Speed (RPM) | 1,196 | 1,187 | 1,178 | 1,169 | 1,158 | 1,146 | 1,132 | 1,140 |
Line Amps | 0.64 | 0.64 | 0.66 | 0.69 | 0.73 | 0.77 | 0.82 | 0.79 |
Industrial Motors
- Weight: 49.50lb
- Product Dimensions: 16.00 x 8.00 x 9.00 inches
- Condition: New
Reviews
There are no reviews yet.