MOOG 630F Centering Flange Yoke

Machined bodies to meet the tight tolerances
Forged and cast material to meet the performance requirement
Minimize the flash lines for less interference
Cleaning process induces compressive strength for increased performance
Machined and threaded holes for mounting ease
Rust preventative added for longer shelf life

SKU: B009HQPIUK Category: Yokes Tags: moog, yoke

Description

MOOG 630F Centering Flange Yoke

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

APPLICATIONS:

2000-2004 Ford Excursion
1999-2004 Ford F-550 Super Duty
1999-2004 Ford F-450 Super Duty
1999-2004 Ford F-250 Super Duty
1999-2004 Ford F-350 Super Duty

Additional information

Asin	B009HQPIUK
Dimensions	‎6.6 x 4.1 x 4.2 inches
Weight	‎3.1 pounds
Manufacturer	‎MOOG Driveline Products

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “MOOG 630F Centering Flange Yoke” Cancel reply

Agricultural & Construction Machinery

Moog 1397 Yoke

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.

Machined Bodies to meet the tight tolerances
Forged and cast material to meet the performance requirement
Minimize the flash Lines for less interference
Cleaning process induces compressive strength for increased performance
Machined and threaded holes for mounting ease

Yokes

Neapco – 1310 Series Drive Shaft Transmission Slip Yoke

Automotive

Neapco N2-4-JK02 Driveshaft End Yoke

N2-4-JK02 Driveshaft End Yoke - Conversion

Part Number N2-4-JK02

Bore Type: Splined

Center Line Uj To End Of Hub (In): 3.000

Driveline Series: 1310HR

Hub Diameter (In): 1.875

Joint Angle (Degrees): 22.000

Length Thru Hole(In): 1.500

Spline Od(In)/No. Teeth: 1.250-24

Uj Retention: U-Bolt

Agricultural & Construction Machinery

Weasler 102-3506 Yoke

35 series yoke with 1 3/8-6 spline bore and quick disconnect connection

PTO drive shafts start with a tractor yoke, the leading connection between the the tractor and the driveline. Weasler provides four types of Tractor Yokes: auto-lok, safety slide lock, spring-lok and quick disconnect. All yokes are compliant with ANSI/ASABE AD5673, ANSI/ASABE AD5674, ANSI/ASABE S604 and EN12965. For lawn and garden applications, specialized auto-lok and spring-lok yokes are available in addition to a male spline yoke. Agricultural tractor yokes are offered in 1 3/8″ 6-spline (type 1), 1 3/8″ 21-spline (type 2), and 1 3/4″ 20-spline (type 3) options to fit the specific tractor connection needed. Optionally 1 1/2″ 8-spline and 1 3/4″ 6-spline options are available. Lawn & Turf tractor yokes are offered in 1″ 10-spline and 1″ 15-spline.

Agricultural & Construction Machinery

Weasler 10001248 Yoke and Shaft Assembly

12 Series Yoke And Shaft

12 series yoke and shaft, 1 x 1 1/8 rectangle

Weasler yoke weldment assemblies provide yoke to shaft and yoke to tube weldment options that are offered in both North American (domestic) , German, and Italian shaft and tube shapes.

Agricultural & Construction Machinery

Weasler 200-6580 – 102-6506 U-Joint Kit and Tractor Yoke

Weasler 200-6580 - 102-6506 U-Joint Kit and Tractor Yoke

AB5 series cross and bearing kit, p standard, center grease fitting - AB5 Series Cross And Bearing Kit

AB5 series yoke with 1 3/8-6 spline bore and quick disconnect connection - AB5 Series Quick Disconnect Yoke

Agricultural & Construction Machinery

Neapco 22-2317 PTO QD Yoke

22-2317 Power Take Off Quick Disconnect Yoke

Part Number 22-2317

Application: Automotive/Ag./Ind. PTO

Bore Size & Shape(In)(Mm): 1.375-21 Involute Spline

Bore Type: Splined

Center Line To End Of Hub (In): 4.810

Driveline Series: 2200

End Of Hub To Set Screw (In): 1.000

Hub Diameter (In): 2.280

Set Screw Location: Gap

Set Screw Thread Size (In)(Mm): 0.560

Agricultural & Construction Machinery

Weasler 700-6443 Yoke

AB4 series yoke with 43 mm trilobe bore and roll pin connection

Shaft yokes (or inner profile yokes) connect the cross and bearing kits to the telescoping shaft or inner tube. Tube yokes (or outer profile yokes), connect the other cross and bearing kits to the opposite side of the telescoping shaft or outer tube. Weasler provides both domestic (North American) and Weasler Profile metric shaft and tube yoke connection options. Domestic yokes are provided as square, rectangle, hexagon or splined in shape. Weasler Profile metric yokes are provided as lemon, star, or trilobe in shape.

Agricultural & Construction Machinery

Neapco 12-2300 PTO QD Yoke

12-2300 Power Take Off Quick Disconnect Yoke

Part Number 12-2300

Application: Automotive/Ag./Ind. PTO

Bore Size & Shape(In)(Mm): 1.000-15 Involute Spline

Bore Type: Splined

Center Line To End Of Hub (In): 3.500

Driveline Series: 1200

Hub Diameter (In): 1.500

Set Screw Location: GAP

Set Screw Thread Size (In)(Mm): (2) 0.377 (QD Ball Hole)

Yokes

Neapco 7-0082NG Centering Yoke Kit

Agricultural & Construction Machinery

Weasler 806-3522 Yoke

35 series yoke with round with 2 keyways bore and setscrew connection

Agricultural & Construction Machinery

Weasler 101-7620 Yoke

AW35 series yoke with 1 3/4-20 spline bore and safety slide lock connection

Automotive

Spicer 211179X Centering Yoke

SPICER 211179X CV Driveshaft Centering Yoke 1330 series

1979 to 1989 Bronco
1979 F-150, F-250, F-350

1330 Series

Fits 1330 Series CV Driveshaft
Use on any 1330 series CV Driveshaft to repair or rebuild Double Cardan Joint
Fits ALL with 3 5/8 inches between Tabs in centering Yoke
GREASEABLEcenter ball socket
New spring Included
Centering Yoke Fits 1330 Series Universal Joint
- Dimension between locating tabs on centering yoke is (3.625 inches) 3 5/8 inches
- Designed to fit (1.062 inches) 1 1/16 inch U-Joint Bearing cap

Yokes

Neapco 8-2420 PTO End Yoke

8-2420 Power Take Off End Yoke

Part Number 8-2420

Application: Automotive/Ag./Ind. PTO

Bore Size & Shape(In)(Mm): 1.891 Outer Profile

Bore Type: Outer Tube Profile

Center Line To End Of Hub (In): 3.781

Driveline Series: W2400

Yokes

Neapco NOE-02-2655-A U-Joint Yoke

Agricultural & Construction Machinery

Weasler 10001448 Yoke

14 series yoke and shaft, 1 x 1 1/8 square

Weasler yoke weldment assemblies provide yoke to shaft and yoke to tube weldment options that are offered in both North American (domestic) , German, and Italian shaft and tube shapes.

Agricultural & Construction Machinery

Weasler 102-1206 Yoke

12 series yoke with 1 3/8-6 spline bore and quick disconnect connection

Agricultural & Construction Machinery

Neapco 12-1197 Power Take Off End Yoke

12-1197 Power Take Off End Yoke

Part Number 12-1197

Application: Automotive/Ag./Ind. PTO

Bore Size & Shape(In)(Mm): 1.000 X 1.125 Rectangle

Bore Type: Rectangular

Center Line To End Of Hub (In): 3.500

Driveline Series: 1200

End Of Hub To Set Screw (In): 1.000

Set Screw Location: GAP

Set Screw Thread Size (In)(Mm): 0.390 (Pin)

Agricultural & Construction Machinery

Weasler 800-4428 Yoke

44 Series Setscrew Yoke

44 series yoke with round with keyway bore and setscrew connection

PTO drive shafts end with an implement yoke, it is the final connection between the PTO drive shaft and the machine or implement connected to the tractor. Weasler implement yokes are provided in a variety of bore and mounting options. Bore options include square, rectangle, hexagon, round and spline. Standard yoke connection options are set screws and pins. Additional implement yoke connection options include torque limiter flange yokes, telescoping yokes (square, round, and hexagon), and clamp yokes.

Fits Series 44N: U-Joint Cap Size: 1-5/16” / 1.313” Cap to Cap: 4” / 4.000”.
2660800-4432, 800 4432, 800-4432, 8004432, 971-8004432, 9718004432, PM800-4432
44N Series
PTO

Yokes

Neapco N3-3-1601KX U-Joint Yoke

Agricultural & Construction Machinery

Weasler 102-1406 Yoke

14 series yoke with 1 3/8-6 spline bore and quick disconnect connection

Agricultural & Construction Machinery

Weasler 302-5500 Shaft Weld Yoke

55 Series Weld Yoke

55 series yoke with 1 11/16-20 spline bore and weld connection

Weasler yoke weldment assemblies provide yoke to shaft and yoke to tube weldment options that are offered in both North American (domestic) , German, and Italian shaft and tube shapes.

Fits Series 55N: U-Joint Cap Size: 1-17/32” / 1.531” Cap to Cap: 4-5/16” / 4.313”.
2660302-5500, 302 5500, 302-5500, 3025500, 55N302-5500, 55N3025500, 971-3025500, 9713025500, PM302-5500
55N Series
PTO

Agricultural & Construction Machinery

Neapco N24GM03X Driveshaft End Yoke

N2-4-GM03X Driveshaft End Yoke - U-Bolt Construction

Part Number N2-4-GM03X

Bore Type: Splined

Center Line Uj To End Of Hub (In): 3.156

Driveline Series: 1310HR

Hub Diameter (In): 1.938

Joint Angle (Degrees): 20.000

Length Thru Hole(In): 1.156

Spline Od(In)/No. Teeth: 1.312-30

Uj Retention: U-Bolt

Agricultural & Construction Machinery

Neapco 8-2012 PTO Quick Disconnect Yoke

8-2012 Power Take Off Quick Disconnect Yoke

Part Number 8-2012

Application: Automotive/Ag./Ind. PTO

Bore Size & Shape(In)(Mm): 1.375-6 Spline

Bore Type: Splined

Center Line To End Of Hub (In): 3.812

Driveline Series: W2200

Spline Od(In)/No. Teeth: 1.375-6

MOOG 630F Centering Flange Yoke