MOOG 608 Centering Yoke

Warranty: Limited Lifetime Warranty
Unit of Measure: Each
UPC: # 746079025123
Series: 1330
Hardware Included: No
Greaseable: Yes
U-Joint Included: No
Bearing Diameter (in): 1-1/16 Inch
Ball Stud Size (in): 1/2 Inch

SKU: B008M2G890 Category: Yokes Tags: moog, yoke

Description

MOOG 608 Centering Yoke

Forged and cast material to meet the performance requirement

Fits:

Ford Bronco 1990-1979 Transfer Case To Rear Axle
Ford Bronco 1979 Transfer Case To Front Axle
Ford F-150 1979 4WD
Ford F-250 1979 4WD
Ford F-350 1997-1979 4WD

Additional information

Asin	B008M2G890
Dimensions	‎6.6 x 2.4 x 2.4 inches
Weight	‎15.2 ounces
Manufacturer	‎MOOG Driveline Products

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “MOOG 608 Centering Yoke” Cancel reply

Agricultural & Construction Machinery

Weasler 10000648 Yoke and Shaft

6 series yoke and shaft, 3/4 x 7/8 rectangle

Weasler yoke weldment assemblies provide yoke to shaft and yoke to tube weldment options that are offered in both North American (domestic) , German, and Italian shaft and tube shapes.

Agricultural & Construction Machinery

Weasler 302-5500 Shaft Weld Yoke

55 Series Weld Yoke

55 series yoke with 1 11/16-20 spline bore and weld connection

Weasler yoke weldment assemblies provide yoke to shaft and yoke to tube weldment options that are offered in both North American (domestic) , German, and Italian shaft and tube shapes.

Fits Series 55N: U-Joint Cap Size: 1-17/32” / 1.531” Cap to Cap: 4-5/16” / 4.313”.
2660302-5500, 302 5500, 302-5500, 3025500, 55N302-5500, 55N3025500, 971-3025500, 9713025500, PM302-5500
55N Series
PTO

Automotive

Neapco 56-2600 Power Take Off Retainer

56-2600 Power Take Off Retainer

Part Number 56-2600

Description: Contains (2) WPB8-26 Retainers, 2600 Series, 2.868" ID

Quantity: 2

Agricultural & Construction Machinery

Weasler 800-4424 Yoke

44 Series Setscrew Yoke

44 series yoke with round with keyway bore and setscrew connection

PTO drive shafts end with an implement yoke, it is the final connection between the PTO drive shaft and the machine or implement connected to the tractor. Weasler implement yokes are provided in a variety of bore and mounting options. Bore options include square, rectangle, hexagon, round and spline. Standard yoke connection options are set screws and pins. Additional implement yoke connection options include torque limiter flange yokes, telescoping yokes (square, round, and hexagon), and clamp yokes.

Agricultural & Construction Machinery

Weasler 807-3520 Yoke

35 series yoke with 1 3/4-20 spline bore and clamp connection

The clamp yoke allows for a tight connection to a mating shaft to minimize fretting corrosion and wear, using standard hardware.

Agricultural & Construction Machinery

Weasler 200-6580 – 102-6506 U-Joint Kit and Tractor Yoke

Weasler 200-6580 - 102-6506 U-Joint Kit and Tractor Yoke

AB5 series cross and bearing kit, p standard, center grease fitting - AB5 Series Cross And Bearing Kit

AB5 series yoke with 1 3/8-6 spline bore and quick disconnect connection - AB5 Series Quick Disconnect Yoke

Agricultural & Construction Machinery

Weasler 102-1206 Yoke

12 series yoke with 1 3/8-6 spline bore and quick disconnect connection

PTO drive shafts start with a tractor yoke, the leading connection between the the tractor and the driveline. Weasler provides four types of Tractor Yokes: auto-lok, safety slide lock, spring-lok and quick disconnect. All yokes are compliant with ANSI/ASABE AD5673, ANSI/ASABE AD5674, ANSI/ASABE S604 and EN12965. For lawn and garden applications, specialized auto-lok and spring-lok yokes are available in addition to a male spline yoke. Agricultural tractor yokes are offered in 1 3/8″ 6-spline (type 1), 1 3/8″ 21-spline (type 2), and 1 3/4″ 20-spline (type 3) options to fit the specific tractor connection needed. Optionally 1 1/2″ 8-spline and 1 3/4″ 6-spline options are available. Lawn & Turf tractor yokes are offered in 1″ 10-spline and 1″ 15-spline.

Agricultural & Construction Machinery

Neapco 22-2312 PTO Quick Disconnect Yoke

22-2312 Power Take Off Quick Disconnect Yoke

Part Number 22-2312

Application: Automotive/Ag./Ind. PTO

Bore Size & Shape(In)(Mm): 1.375-6B Spline

Bore Type: Splined

Center Line To End Of Hub (In): 4.810

Driveline Series: 2200

End Of Hub To Set Screw (In): 1.000

Hub Diameter (In): 2.280

Set Screw Location: Gap

Set Screw Thread Size (In)(Mm): 0.560

Yokes

Neapco N2-3-6081X 27 Spline 1310 Series Transmission Slip Yoke (TH350/700R4/T-5/4L60)

Agricultural & Construction Machinery

Moog 1397 Yoke

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.

Machined Bodies to meet the tight tolerances
Forged and cast material to meet the performance requirement
Minimize the flash Lines for less interference
Cleaning process induces compressive strength for increased performance
Machined and threaded holes for mounting ease

Agricultural & Construction Machinery

Neapco 8-2012 PTO Quick Disconnect Yoke

8-2012 Power Take Off Quick Disconnect Yoke

Part Number 8-2012

Application: Automotive/Ag./Ind. PTO

Bore Size & Shape(In)(Mm): 1.375-6 Spline

Bore Type: Splined

Center Line To End Of Hub (In): 3.812

Driveline Series: W2200

Spline Od(In)/No. Teeth: 1.375-6

Agricultural & Construction Machinery

Neapco 22-2317 PTO QD Yoke

22-2317 Power Take Off Quick Disconnect Yoke

Part Number 22-2317

Application: Automotive/Ag./Ind. PTO

Bore Size & Shape(In)(Mm): 1.375-21 Involute Spline

Bore Type: Splined

Center Line To End Of Hub (In): 4.810

Driveline Series: 2200

End Of Hub To Set Screw (In): 1.000

Hub Diameter (In): 2.280

Set Screw Location: Gap

Set Screw Thread Size (In)(Mm): 0.560

Agricultural & Construction Machinery

Neapco 12-2300 PTO QD Yoke

12-2300 Power Take Off Quick Disconnect Yoke

Part Number 12-2300

Application: Automotive/Ag./Ind. PTO

Bore Size & Shape(In)(Mm): 1.000-15 Involute Spline

Bore Type: Splined

Center Line To End Of Hub (In): 3.500

Driveline Series: 1200

Hub Diameter (In): 1.500

Set Screw Location: GAP

Set Screw Thread Size (In)(Mm): (2) 0.377 (QD Ball Hole)

Yokes

Neapco – 1310 Series Driveshaft Tube Weld Yoke

Yokes

Neapco – Drive Shaft End Yoke

Yokes

Neapco 7-0082 Centering Yoke Kit

Agricultural & Construction Machinery

Weasler 101-7620 Yoke

AW35 series yoke with 1 3/4-20 spline bore and safety slide lock connection

Yokes

Neapco NOE-02-2653-A U-Joint Yoke

Yokes

Neapco 7-0079 Centering Yoke Kit

Yokes

Neapco – Drive Shaft Flange Yoke

Agricultural & Construction Machinery

Weasler 700-6443 Yoke

AB4 series yoke with 43 mm trilobe bore and roll pin connection

Shaft yokes (or inner profile yokes) connect the cross and bearing kits to the telescoping shaft or inner tube. Tube yokes (or outer profile yokes), connect the other cross and bearing kits to the opposite side of the telescoping shaft or outer tube. Weasler provides both domestic (North American) and Weasler Profile metric shaft and tube yoke connection options. Domestic yokes are provided as square, rectangle, hexagon or splined in shape. Weasler Profile metric yokes are provided as lemon, star, or trilobe in shape.

Automotive

Neapco ‎N3-3-1502KX Slip Yoke

N3-3-1502KX Driveshaft Slip Yoke

Part Number N3-3-1502KX

Center Line Uj To End Of Spline (In): 7.310

Center Line Uj To Face Of Washer(In): 1.240

Driveline Series: 1350

Dust Cap: 280195

Joint Angle (Degrees): 20.000

Lube Fitting Part Number: 0641-B

Spline Od(In)/No. Teeth: 1.375-16

Agricultural & Construction Machinery

Weasler 10001248 Yoke and Shaft Assembly

12 Series Yoke And Shaft

12 series yoke and shaft, 1 x 1 1/8 rectangle

Weasler yoke weldment assemblies provide yoke to shaft and yoke to tube weldment options that are offered in both North American (domestic) , German, and Italian shaft and tube shapes.

Yokes

Neapco N2-26-367 Yoke

Fits 1310 Series U-Joints (3 1/4" Wide, 1 1/16" Cap Diameter)
For 1310 Series Double Cardan CV Driveshafts
Center to Center of U-Joints: 2.69"
Interchangeable with Spicer 2-26-497 H Yoke

MOOG 608 Centering Yoke