The C Type coupling consists of two flex hubs, one sleeve and one accessory kit consisting of seals and snap rings. Reinforced rubber seals with snap rings hold lubricant in place.
Lovejoy 69790400130 Cast Iron C 5 Sleeve, 8.12" OD, 12.25" OAL, 270900 Inch Pounds
- Low profile compact design is easy to implement
- Universal Hub for continuous sleeve gear coupling
- Basis for all types of Lovejoy/Sier-Bath Continuous Sleeve Couplings
- Unit count: 1.0
SKU: B010DT9MYC
Category: Gear & Sleeve
Description
Additional information
Asin | B010DT9MYC |
---|---|
Dimensions | |
Weight | |
Manufacturer |
Reviews (0)
Be the first to review “Lovejoy 69790400130 Cast Iron C 5 Sleeve, 8.12" OD, 12.25" OAL, 270900 Inch Pounds” Cancel reply
Related products
Lovejoy 5JE Solid Design S-Flex Coupling EPDM Rubber Sleeve
Specifications
Description |
5JE SLEEVE |
Coupling Size |
5JE |
Sleeve Type |
JE |
Type |
Sleeves for S-Flex Endurance Couplings |
Material |
EPDM |
Color |
Black |
Connection Type A x B |
Coupling Sleeve |
Weight |
0.30 lb |
Nominal Torque |
312 in·lb35.26 N·m |
- Shrouded metric bolts
- Unequaled bore and torque capacity
- 1.5° of misalignment per gear mesh
- Improved fastener corrosion resistance
- Advanced seal design intensifying contamination resistance
- Shrouded bolts
- Unequaled bore and torque capacity
- 1.5° of misalignment per gear mesh
- Improved fastener corrosion resistance
- Advanced seal design intensifying contamination resistance
- Shrouded metric bolts
- Unequaled bore and torque capacity
- 1.5° of misalignment per gear mesh
- Improved fastener corrosion resistance
- Advanced seal design intensifying contamination resistance
Gear & Sleeve
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
Specifications
Description |
8E SLEEVE |
Coupling Size |
8E |
Sleeve Type |
E |
Type |
Sleeves for S-Flex Endurance Couplings |
Material |
EPDM |
Color |
Black |
Connection Type A x B |
Coupling Sleeve |
Weight |
1.15 lb |
Nominal Torque |
1475 in·lb166.66 N·m |
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
- Lovejoy offers flexible sleeves for S-Flex Endurance couplings in three designs: one-piece solid, one-piece split, and two-piece with retaining ring
- The one-piece split design provides solutions for applications with unique requirements where small shaft separations inhibit the installation of a one-piece solid sleeve
- Pre-molded teeth along the diameter of the sleeve engage with teeth of the coupling flanges
- No clamps or screws are needed to connect the flanges with the
- Unequaled bore and torque capacity
- 1.5° of misalignment per gear mesh
- Improved fastener corrosion resistance
- Advanced seal design intensifying contamination resistance
Reviews
There are no reviews yet.