Huco MULTI-BEAM 703.51
Huco MULTI-BEAM 703.51
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Description
Additional information
Asin | B078YBWMG9 |
---|
Reviews (0)
Be the first to review “Huco MULTI-BEAM 703.51” Cancel reply
Related products
Boston Gear XFCR25 Rubber Coupling Insert
Boston Gear Rubber spider insert for Boston Gear FC25 and SSFC25
BOSTON GEAR Oil Resistant Spider Insert: FC25, 450 in-lb Rated Torque, 3,600 RPM Max., -32° to 200°F
Boston Gear XFCBB30 BOST-BRONZ Shaft Coupling Insert
Boston Gear Bost-Bronz spider insert for Boston Gear FC30 and SSFC30
BOSTON GEAR Oil Impregnated Spider Insert: FC30, 3,200 in-lb Rated Torque, 690 RPM Max., Bronze
Couplings
BOSTON GEAR FC-15-1/2 SHAFT COUPLING
Boston Gear FC15 1/2
Beam
Huco 723.51.4747
Six Beam Coupling, Clamp, Relieved, 51mm OD, 3/4in. x 3/4in. Bores
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Couplings
Boston Gear XFCR12 Rubber Spider Insert
Boston Gear Rubber spider insert for Boston Gear FC12 and SSFC12
- Size - Jaw Couplings: FC12
- Material - Spiders: Synthetic Rubber
- Rated Torque: 65 in-lb
- Max. RPM: 3,600 RPM
- HP Rating @ 100 RPM: 0.10
- Temp. Range: -32 Degrees to 200 Degrees F
- Type: Oil Resistant
Boston Gear XFCR30 Rubber Coupling Insert
Boston Gear Rubber spider insert for Boston Gear FC30 and SSFC30- Size - Jaw Couplings: FC30
- Material - Spiders: Synthetic Rubber
- Rated Torque: 800 in-lb
- Max. RPM: 3,600 RPM
- HP Rating @ 100 RPM: 1.30
- Temp. Range: -32 Degrees to 200 Degrees F
- Max. Torque (In.-Lbs.): 800
Beam
Huco 723.51.4848
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Couplings
BOSTON GEAR SSFC12 Jaw Coupling Hub
- Size - Jaw Couplings: SSFC12
- Keyway Size Type: 1/8 in x 1/16 in
- Material - Hubs: Stainless Steel
- Outside Dia.: 1.25 in
- Assembled Coupling Length: 2.31 in
- Overall Length: 2.31 in
- Size: SSFC12
Couplings
Boston Gear FC20-7/8 Jaw coupling hub
Series | : | FC Series |
Coupling Size | : | FC20 |
Bore Diameter | : | 7/8 in |
Hub Diameter | : | 1-3/4 in |
Hub Length | : | 1-1/8 in |
Keyway Size | : | 3/16 x 3/32 in |
Maximum Speed | : | 1750 rpm |
Length Through Bore | : | 1-4/16 in |
Screw Size | : | 5/16-18 |
Material | : | Steel |
Boston Gear XFCA45 Polyurethane Spider Insert
Boston Gear Polyurethane spider insert Boston Gear FC45 and SSFC45- Size - Jaw Couplings: FC45
- Material - Spiders: Polyurethane
- Rated Torque: 5,250 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 7.50
- Temp. Range: -32 Degrees to 200 Degrees F
- HP Rating @ 300 RPM: 22.4
Boston Gear XFCR20 Rubber Coupling Insert
Boston Gear Rubber Spider insert for Boston Gear FC20 and SSFC20
- Oil-Resistant Synthetic Rubber is recommended where quietness is desired, particularly at motor speeds
- Polyurethane is recommended where moderate to heavy shock loads are encountered
- Oil-Impregnated Bost-Bronze is recommended for high torque loads, particularly at slower speeds
Boston Gear XFCA15 Polyurethane Shaft Coupling Insert
Boston Gear Polyurethane Spider Insert for Boston Gear FC15 and SSFC15
BOSTON GEAR Polyurethane Spider Insert: FC15, 250 in-lb Rated Torque, 3,600 RPM Max., -32° to 200°F
Boston Gear XFCBB20 Bost-Bronz Coupling Insert
OVERVIEW
- Oil-Resistant Synthetic Rubber is recommended where quietness is desired, particularly at motor speeds
- Polyurethane is recommended where moderate to heavy shock loads are encountered
- Oil-Impregnated Bost-Bronze is recommended for high torque loads, particularly at slower speeds
Couplings
Boston Gear FC20-3/4 Shaft Coupler hub
- Product Description
- Steel Jaw Coupling Hubs connect to drive shafts to provide dependable power transfer in high-temperature applications. A complete assembly requires two hubs and one jaw coupling spider, available separately.
Boston Gear XFCA30 Polyurethane Shaft Coupling Insert
Boston Gear Polyurethane Spider insert - Boston Gear FC30 and SSFC30
- Size - Jaw Couplings: FC30
- Material - Spiders: Polyurethane
- Rated Torque: 1,500 in-lb
- Max. RPM: 3,600 RPM
- HP Rating @ 100 RPM: 2.20
- Temp. Range: -32 Degrees to 200 Degrees F
- Serviceable Temp. Range (F): -32 to 200
Boston Gear XFCR45 Rubber Shaft Coupling Insert
Boston Gear Rubber Spider Insert for Boston Gear FC45 and SSFC45- Size - Jaw Couplings: FC45
- Material - Spiders: Synthetic Rubber
- Rated Torque: 2,800 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 4.40
- Temp. Range: -32 Degrees to 200 Degrees F
- Coupling Size: FC45
-
XFCR45 RUBBER INSERT 08090
Couplings
Boston Gear FC20-1/2 Jaw coupling hub
RPM [MAX] | 1800 rpm |
LENGTH THROUGH BORE | 1.57 in |
OUTSIDE DIA. | 2 in |
KEYWAY SIZE | 1/8 x 1/16 |
LOCK TYPE | Setscrew |
COUPLING SIZE | FC20 |
MATERIAL | Steel |
HUB DIA. | 1 3/4 in |
WEIGHT | 1.181 LB |
EAN OR UPC | 781711082584 |
Boston Gear XFCBB15 Bost-Bronz Coupling Insert
Boston Gear Bost-Bronz spider insert for Boston Gear FC15 and SSFC15 Mfr # XFCBB15 BRONZE INSERTS 08066
Spicer 5-1310-1X U-Joint Kit 1310/SPL22 Series
5-1310-1X Universal Joint
Description
Universal Joint; Greaseable
Boston Gear XFCR38 Rubber Coupling Insert
Boston Gear Rubber Spider Insert for Boston Gear FC38 and SSFC38
- Size - Jaw Couplings: FC38
- Material - Spiders: Synthetic Rubber
- Rated Torque: 1,600 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 2.50
- Temp. Range: -32 Degrees to 200 Degrees F
- Item: Oil Resistant Spider Insert
Beam
TB Woods 703.51.4145
TB Woods MULTI-BEAM 51 5/8 --18MM (703.51.4145)
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Boston Gear SSFC20-1 Jaw Coupling Hub 1/4 in x 1/8 in KW
SSFC Series Insert (3 Jaw) Type Couplings are made of 316 Stainless Steel and are available with precision machined bored or solid hubs. The SSFC Series coupling offers three types of inserts for different service requirements.
Boston Gear XFCA20 Polyurethane Spider Insert
- Oil-Resistant Synthetic Rubber is recommended where quietness is desired, particularly at motor speeds
- Polyurethane is recommended where moderate to heavy shock loads are encountered
- Oil-Impregnated Bost-Bronze is recommended for high torque loads, particularly at slower speeds
Couplings
Boston Gear FC45 2in Steel FC Coupling
PRODUCT DETAILS
- Size FC45 Coupling Hub
- 2" Bore
FEATURES
- No lubricant required
- Complete with keyway and setscrew
- Precision machined
Reviews
There are no reviews yet.