Huco 723.51.4747
Huco 723.51.4747
Six Beam Coupling, Clamp, Relieved, 51mm OD, 3/4in. x 3/4in. Bores
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
SKU: B078YB916H
Categories: Beam, Couplings, Collars & Universal Joiners
Tags: beam coupling, coupling, Huco
Description
Coupling Type MultiBeam Coupling
Configuration 6 Beam Relieved Bore
Size 51
Material Stainless Steel
Max Bore B1 (mm) 26
Min Bore B1 (mm) 10
Max Bore B2 (mm) 26
Min Bore B2 (mm) 16
Angular Compensation, Max (degrees) 7
Bore Tolerance (mm) +0.03 / -0.00
Fastener Screw Size M6
Fastener Screw Torque (Nm) 9.75
Fastener Wrench Size (mm) 5
Max Speed (rpm) 5000
Operating Temperature (°C) -40 to +140
Peak Torque (Nm) 37
Radial Compensation, Max (mm) 0.9
Resists Axial Load Yes
Shaft Connection Clamp
Torsional Stiffness (Nm/rad) 783
Mass (Weight) (g) 996
[D] Outside Diameter (mm) 50.8
L1 Dimension (mm) 25
[L] Length (mm) 95.3
[L] Overall Length (mm) 95.3
Item Note Coupling load capacity depends on the operating load cycle. Refer to catalog for further sizing information.
Additional information
Asin | B078YB916H |
---|
Reviews (0)
Be the first to review “Huco 723.51.4747” Cancel reply
Related products
Lovejoy U-100R Shaft-to-Shaft Uniflex Coupling 3/4 In Bore A 1 In Bore B w kw
Specifications
Description |
U100R CPLG 3/4X1" KW BE |
Hub Style |
Regular |
Type |
Shaft-to-Shaft |
Material |
Steel |
Weight |
2.77 lb |
Color |
Gray/Metallic |
Bore Type |
Finished Bore |
Lovejoy RRU-137 Drop-Out Style Uniflex Coupling Hub 5/8 In Bore No Kw
Specifications
Description |
RRU137 HUB 5/8 N/KW |
Hub Style |
RRU Hub |
Coupling Type |
Drop-Out |
Material |
Steel |
Color |
Gray/Metallic |
Bore Type |
Finished Bore |
Weight |
3.96 lb |
Lovejoy U-125R Shaft-to-Shaft Uniflex Coupling 1-1/4 In Bore A 1-1/4 In Bore B w Kw
Specifications
Description |
UFH125R CPLG 1-1/4 1/4X1/8KW |
Hub Style |
Regular |
Type |
Flange-to-Shaft |
Material |
Steel |
Weight |
3.15 lb |
Color |
Gray/Metallic |
Bore Type |
Finished Bore |
# of Mounting Screws Required |
3 |
Lovejoy U-125R Shaft-to-Shaft Uniflex Coupling 1-1/4 In Bore A 1-1/4 In Bore B w Kw
Lovejoy UFH-125R Flange-to-Shaft Uniflex Coupling 1-1/4 In Bore w KW
Specifications
Description |
UFH125R CPLG 1-1/4 1/4X1/8KW |
Hub Style |
Regular |
Type |
Flange-to-Shaft |
Material |
Steel |
Weight |
3.15 lb |
Color |
Gray/Metallic |
Bore Type |
Finished Bore |
# of Mounting Screws Required |
3 |
Lovejoy UFH-75R Flange-to-Shaft Uniflex Coupling 1/2 In Bore No Kw W Ss
Specifications
Description |
UFH75R CLPG 1/2 N/KW W/SS |
Hub Style |
Regular |
Type |
Flange-to-Shaft |
Material |
Steel |
Weight |
1.00 lb |
Color |
Gray/Metallic |
Bore Type |
Finished Bore |
# of Mounting Screws Required |
3 |
Lovejoy UFH-75R Flange-to-Shaft Uniflex Coupling 1/2 In Bore No Kw W Ss
Lovejoy UFH-75S Flange-to-Shaft Uniflex Coupling 5/8 In Bore w Kw
Specifications
Description |
UFH75S CPLG 5/8 3/16X3/32KW |
Hub Style |
Short |
Type |
Flange-to-Shaft |
Material |
Steel |
Weight |
0.87 lb |
Color |
Gray/Metallic |
Bore Type |
Finished Bore |
# of Mounting Screws Required |
3 |
Lovejoy UFH-50R Flange-to-Shaft Uniflex Coupling 1/2 In Bore No Kw w SS
Specifications
Description |
UFH50R CPLG 1/2 N/KW W/SS |
Hub Style |
Regular |
Type |
Flange-to-Shaft |
Material |
Steel |
Weight |
0.50 lb |
Color |
Gray/Metallic |
Bore Type |
Finished Bore |
# of Mounting Screws Required |
3 |
Lovejoy UFH-125S Flange-to-Shaft Uniflex Coupling 3/4 In Bore with Kw
Specifications
Description |
UFH125S CPLG 3/4 3/16X3/32KW |
Hub Style |
Short |
Type |
Flange-to-Shaft |
Material |
Steel |
Weight |
3.00 lb |
Color |
Gray/Metallic |
Bore Type |
Finished Bore |
# of Mounting Screws Required |
3 |
Lovejoy UFH-125S Flange-to-Shaft Uniflex Coupling 3/4 In Bore with Kw
Lovejoy LOJ-10B Universal Joint 5/8 In Round Bore and 3/4 In Round Bore No Kw No SS
Specifications
Description |
LOJ10B UJNT 3/4X3/4 NKW NSS |
Type |
Universal Joints - LO Type |
Material |
Steel |
Weight |
0.76 lb |
Style |
Bored |
Color |
Metallic |
Bore Type |
Finished Bore |
Couplings
Lovejoy UF-100 Dropout
Lovejoy 68514413938 Specifications
Description |
UF100 DROP OUT |
Hub Style |
Drop Out |
Coupling Type |
Flange-to-Flange |
Material |
Steel |
Color |
Gray/Metallic |
# of Mounting Screws Required |
3 |
Weight |
2.10 lb |
- Drop-out section for RRU-type Uniflex coupling and flange-to-flange flexible coupling
- Steel for strength and durability
- Accommodates angular and parallel misalignment
- Rotational speeds up to 30,000 rpm
- Set screw and key way for secure attachment to shaft
Lovejoy U-62R Shaft-to-Shaft Uniflex Coupling 3/8 In Bore A 3/8 In Bore B No Kw
Specifications
Description |
U62R CPLG 3/8X3/8 N/KW BE |
Hub Style |
Regular |
Type |
Shaft-to-Shaft |
Material |
Steel |
Weight |
0.77 lb |
Color |
Gray/Metallic |
Bore Type |
Finished Bore |
Lovejoy U-62R Shaft-to-Shaft Uniflex Coupling 3/8 In Bore A 3/8 In Bore B No Kw
Gear & Sleeve
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
Specifications
Description |
8E SLEEVE |
Coupling Size |
8E |
Sleeve Type |
E |
Type |
Sleeves for S-Flex Endurance Couplings |
Material |
EPDM |
Color |
Black |
Connection Type A x B |
Coupling Sleeve |
Weight |
1.15 lb |
Nominal Torque |
1475 in·lb166.66 N·m |
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
- Lovejoy offers flexible sleeves for S-Flex Endurance couplings in three designs: one-piece solid, one-piece split, and two-piece with retaining ring
- The one-piece split design provides solutions for applications with unique requirements where small shaft separations inhibit the installation of a one-piece solid sleeve
- Pre-molded teeth along the diameter of the sleeve engage with teeth of the coupling flanges
- No clamps or screws are needed to connect the flanges with the
Lovejoy U-100R Shaft-to-Shaft Uniflex Coupling 3/4 In Bore A 3/4 In Bore B w KW
Specifications
Description |
U100R CPLG 3/4X3/4 3/16KW BE |
Hub Style |
Regular |
Type |
Shaft-to-Shaft |
Material |
Steel |
Weight |
2.60 lb |
Color |
Gray/Metallic |
Bore Type |
Finished Bore |
Lovejoy UFH-125R Flange-to-Shaft Uniflex Coupling 3/4 In Bore w Kw
Specifications
Description |
UFH125R CPLG 3/4 3/16X3/32K |
Hub Style |
Regular |
Type |
Flange-to-Shaft |
Material |
Steel |
Weight |
3.00 lb |
Color |
Gray/Metallic |
Bore Type |
Finished Bore |
# of Mounting Screws Required |
3 |
Lovejoy UFH-125R Flange-to-Shaft Uniflex Coupling 3/4 In Bore w Kw
Lovejoy U-125R Shaft-to-Shaft Uniflex Coupling 3/4 In bore KW
Specifications
Description |
U125R CPLG 3/4X3/4 3/16KWBE |
Hub Style |
Regular |
Type |
Shaft-to-Shaft |
Material |
Steel |
Weight |
2.70 lb |
Color |
Gray/Metallic |
Bore Type |
Finished Bore |
Lovejoy RRU-150 Drop-Out Style Uniflex Coupling Hub 7/8 In Bore No Kw
Specifications
Description |
RRU150 HUB 7/8 N/KW |
Hub Style |
RRU Hub |
Coupling Type |
Drop-Out |
Material |
Steel |
Color |
Gray/Metallic |
Bore Type |
Finished Bore |
Weight |
10.00 lb |
Lovejoy U-62R Shaft-to-Shaft Uniflex Coupling 5/8 In Bore A 5/8 In Bore B w Kw
Specifications
Description |
U62R CPLG 5/8X5/8 3/16X3/32K |
Hub Style |
Regular |
Type |
Shaft-to-Shaft |
Material |
Steel |
Weight |
0.77 lb |
Color |
Gray/Metallic |
Bore Type |
Finished Bore |
Lovejoy RRU-150 Drop-Out Style Uniflex Coupling Hub 3/4 In Bore No Kw No SS
Specifications
Description |
RRU150 HUB 3/4 N/KW N/SS RSB |
Hub Style |
RRU Hub |
Coupling Type |
Drop-Out |
Material |
Steel |
Color |
Gray/Metallic |
Bore Type |
Rough Stock Bore |
Weight |
10.00 lb |
Lovejoy U-100R Shaft-to-Shaft Uniflex Coupling 1 In Bore A 1 In Bore B w Kw
Specifications
Description |
U100R CPLG 1"X1" 1/4X1/8KW |
Hub Style |
Regular |
Type |
Shaft-to-Shaft |
Material |
Steel |
Weight |
2.60 lb |
Color |
Gray/Metallic |
Bore Type |
Finished Bore |
Lovejoy 1850 Series Shaft Locking Device 2-9/16 In shaft diameter
Specifications
Description |
SLD 1850 IN 2-9/16 |
Coupling Size |
SLD 1850 |
Type |
Internal |
Collar Material |
Silver/Metallic |
Weight |
2.40 lb |
Screw Type |
Socket Head Cap Screw |
Screw Material |
Steel |
Style |
Self Centering |
Application |
Internal Shaft Locking Device |
# of Locking Screws |
8 |
Lovejoy 1850 Series Shaft Locking Device 2-9/16 In shaft diameter
Lovejoy U-100R Shaft-to-Shaft Uniflex Coupling 5/8 In Bore A 15/16 In Bore B w Kw
Specifications
Description |
U100R CPLG 5/8X15/16 STD KWBE |
Hub Style |
Regular |
Type |
Shaft-to-Shaft |
Material |
Steel |
Weight |
2.84 lb |
Color |
Gray/Metallic |
Bore Type |
Finished Bore |
Lovejoy U-25R Shaft-to-Shaft Uniflex Coupling 1/4 In Bore No Kw
Specifications
Description |
U25R CPLG 1/4X1/4 N/KW BE |
Hub Style |
Regular |
Type |
Shaft-to-Shaft |
Material |
Steel |
Weight |
0.10 lb |
Color |
Gray/Metallic |
Bore Type |
Finished Bore |
Lovejoy UFH-125R Flange-to-Shaft Uniflex Coupling 1-1/8 In Bore w Kw
Specifications
Description |
UFH125R CPLG 1-1/8 1/4X1/8KW |
Hub Style |
Regular |
Type |
Flange-to-Shaft |
Material |
Steel |
Weight |
3.00 lb |
Color |
Gray/Metallic |
Bore Type |
Finished Bore |
# of Mounting Screws Required |
3 |
Reviews
There are no reviews yet.