Lovejoy U-125R Shaft-to-Shaft Uniflex Coupling 1-1/4 In Bore A 1-1/4 In Bore B w Kw

8514413899, UFH Type with Keyway, Regular Version – Inch (Imperial) Bores

Dimensional Data

Bore Size	1 1/4 in
Hub Size	UFH125R
Set Screw Thread Size (Dimension T)	3/8-16
Keyway Size (W x D)	1/4 x 1/8 in
Dimension HD	2.170 in55.12 mm
Overall Length	3.75 in95.25 mm
Pin Location (Dimension SL)	0.62 in
Length thru Bore	1.280 in32.51 mm
Min. Bore (Dimensions ID1/ID2)	0.625 in15.88 mm
Max. Bore (Dimensions ID1/ID2)	1.25 in32.00 mm
Dimension BC	3.120 in79.25 mm
Dimension D	3.560 in90.42 mm
Flange Diameter (Dimension FD)	3.680 in93.47 mm
Dimension FL	0.500 in12.70 mm
Mounting Screw Thread Size	5/16-18
Cubic inches	50.78400 in³

Performance Data

Operating Temperature Range	-40 to 250 ºF
Max. Torque	755 in·lb
Max. Speed	6000 rpm
Max. Recommended End Play	0.040 in1.02 mm
Max. Parallel Offset	0.044 in1.12 mm
Wind-Up Angle at Nominal Torque	1.85 º
Wind-Up Angle at Max. Torque	4.5 º
Rated HP at 100 rpm	1.21 hp
# of Set Screws Required	1

Coupling Design

Coupling Design

Flexible Spring Type Coupling with Exclusive Triple Wound Spring Design The Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling.

Lovejoy U-125R Shaft-to-Shaft Uniflex Coupling 1-1/4 In Bore A 1-1/4 In Bore B w Kw

This Lovejoy U Type Uniflex coupling is an all-steel, single-piece coupling that connects two rotating shafts, providing low backlash/windup.

The flexing center of the coupling consists of three opposingly wound square wire springs for forward or reverse operation, providing low backlash/windup.

Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling that compensates for high degrees of misalignment (up to 4.5° angular, up to .045 inches parallel). Its compact, single-piece design allows for placement in tight places, and its all-metal design is durable and requires no lubrication.

This coupling is resistant to oil, grease, dirt, and most industrial chemicals and can withstand temperatures ranging from -40 to 450 degrees F.

A keyway in each hub prevents the shaft from rotating in the coupling hub. This coupling is suitable for applications such as printing and binding registration, robotics/positioning, conveyors, machine tools, centrifugal pumps, agricultural machinery, blowers, winding machines, and steering mechanisms.

Flexible couplings are used to link two rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from one shaft to the other.

Most flexible couplings consist of two hubs and a middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the two shafts.

Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from one shaft to another in the form of stresses, loads, vibrations, and other forces, which vary from one type of misalignment to another.

Flexible couplings are used in a broad range of applications, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.

Lovejoy manufactures flexible couplings, universal joints, variable speed drives, and other transmission and mechanical power products.

The company, founded in 1900, is headquartered in Downers Grove, IL.

Asin	B004S2T0LG