Meritor is a global supplier for commercial vehicle manufacturers for specialty industries with a wide range of aftermarket solutions from drivetrain to brake systems.
Description
Additional information
Asin | B088SSM34B |
---|---|
Dimensions | 14.5 x 14.5 x 10 inches |
Weight | 35 pounds |
Manufacturer | Meritor Genuine |
Reviews (0)
Be the first to review “DRIVELINE – SPLINE PLUG” Cancel reply
Related products
Agricultural & Construction Machinery
Weasler 10001248 Yoke and Shaft Assembly
12 Series Yoke And Shaft
12 series yoke and shaft, 1 x 1 1/8 rectangle
Weasler yoke weldment assemblies provide yoke to shaft and yoke to tube weldment options that are offered in both North American (domestic) , German, and Italian shaft and tube shapes.Agricultural & Construction Machinery
Weasler 200-8474 and 102-8406 kit
- Fits Series 4: U-Joint Cap Size: 27.0 MM / 1-1/16” (1.063) Cap to Cap: 74.6 MM / 2-15/16” (2.937). Fits Series 2300/210: U-Joint Cap Size: 27.0 MM 1-1/16” (1.063) / Cap to Cap: 74.6 MM / 2-15/16” (2.937).
- 200-8474, 102-8406
- Bondioli/Pavesi 4 & Walterscheid 2300/210 Series
- PTO
Agricultural & Construction Machinery
Weasler 800-4428 Yoke
44 Series Setscrew Yoke
44 series yoke with round with keyway bore and setscrew connection
PTO drive shafts end with an implement yoke, it is the final connection between the PTO drive shaft and the machine or implement connected to the tractor. Weasler implement yokes are provided in a variety of bore and mounting options. Bore options include square, rectangle, hexagon, round and spline. Standard yoke connection options are set screws and pins. Additional implement yoke connection options include torque limiter flange yokes, telescoping yokes (square, round, and hexagon), and clamp yokes.- Fits Series 44N: U-Joint Cap Size: 1-5/16” / 1.313” Cap to Cap: 4” / 4.000”.
- 2660800-4432, 800 4432, 800-4432, 8004432, 971-8004432, 9718004432, PM800-4432
- 44N Series
- PTO
Automotive
Neapco 56-2600 Power Take Off Retainer
56-2600 Power Take Off Retainer
Part Number 56-2600
Description: Contains (2) WPB8-26 Retainers, 2600 Series, 2.868" ID
Quantity: 2
Automotive
Neapco N3-3-1502KX Slip Yoke
N3-3-1502KX Driveshaft Slip Yoke
Part Number N3-3-1502KX
Center Line Uj To End Of Spline (In): 7.310
Center Line Uj To Face Of Washer(In): 1.240
Driveline Series: 1350
Dust Cap: 280195
Joint Angle (Degrees): 20.000
Lube Fitting Part Number: 0641-B
Spline Od(In)/No. Teeth: 1.375-16
Agricultural & Construction Machinery
Neapco 12-1197 Power Take Off End Yoke
12-1197 Power Take Off End Yoke
Part Number 12-1197
Application: Automotive/Ag./Ind. PTO
Bore Size & Shape(In)(Mm): 1.000 X 1.125 Rectangle
Bore Type: Rectangular
Center Line To End Of Hub (In): 3.500
Driveline Series: 1200
End Of Hub To Set Screw (In): 1.000
Set Screw Location: GAP
Set Screw Thread Size (In)(Mm): 0.390 (Pin)
Agricultural & Construction Machinery
Neapco N24GM03X Driveshaft End Yoke
N2-4-GM03X Driveshaft End Yoke - U-Bolt Construction
Part Number N2-4-GM03X
Bore Type: Splined
Center Line Uj To End Of Hub (In): 3.156
Driveline Series: 1310HR
Hub Diameter (In): 1.938
Joint Angle (Degrees): 20.000
Length Thru Hole(In): 1.156
Spline Od(In)/No. Teeth: 1.312-30
Uj Retention: U-Bolt
Agricultural & Construction Machinery
Weasler 807-3520 Yoke
35 series yoke with 1 3/4-20 spline bore and clamp connection
The clamp yoke allows for a tight connection to a mating shaft to minimize fretting corrosion and wear, using standard hardware.Yokes
- Fits 1310 Series U-Joints (3 1/4" Wide, 1 1/16" Cap Diameter)
- For 1310 Series Double Cardan CV Driveshafts
- Center to Center of U-Joints: 2.69"
- Interchangeable with Spicer 2-26-497 H Yoke
Agricultural & Construction Machinery
Weasler 101-7620 Yoke
AW35 series yoke with 1 3/4-20 spline bore and safety slide lock connection
Automotive
Spicer 211342X Socket Yoke Assembly
DOUBLE CARDAN CV DRIVESHAFT CENTERING YOKE- Fits 1984 BRONCO II with 1210 series yoke style rear output on transfer case
- Fits 1983 to 1985 RANGER 4X4 with 1210 series yoke style rear output on transfer case
- 1210 series
- 2.438 inches between Locating Tabs
- 1.062 inch bearing caps
- Outside Snap Rings Style
- Greaseable
Agricultural & Construction Machinery
Weasler 200-6580 - 102-6506 U-Joint Kit and Tractor Yoke
AB5 series cross and bearing kit, p standard, center grease fitting - AB5 Series Cross And Bearing Kit
AB5 series yoke with 1 3/8-6 spline bore and quick disconnect connection - AB5 Series Quick Disconnect Yoke
Automotive
Spicer 211179X Centering Yoke
SPICER 211179X CV Driveshaft Centering Yoke 1330 series
- 1979 to 1989 Bronco
- 1979 F-150, F-250, F-350
-
Fits 1330 Series CV Driveshaft
-
Use on any 1330 series CV Driveshaft to repair or rebuild Double Cardan Joint
-
Fits ALL with 3 5/8 inches between Tabs in centering Yoke
-
GREASEABLEcenter ball socket
-
New spring Included
-
Centering Yoke Fits 1330 Series Universal Joint
-
Dimension between locating tabs on centering yoke is (3.625 inches) 3 5/8 inches
-
Designed to fit (1.062 inches) 1 1/16 inch U-Joint Bearing cap
-
Agricultural & Construction Machinery
Weasler 102-1206 Yoke
12 series yoke with 1 3/8-6 spline bore and quick disconnect connection
PTO drive shafts start with a tractor yoke, the leading connection between the the tractor and the driveline. Weasler provides four types of Tractor Yokes: auto-lok, safety slide lock, spring-lok and quick disconnect. All yokes are compliant with ANSI/ASABE AD5673, ANSI/ASABE AD5674, ANSI/ASABE S604 and EN12965. For lawn and garden applications, specialized auto-lok and spring-lok yokes are available in addition to a male spline yoke. Agricultural tractor yokes are offered in 1 3/8″ 6-spline (type 1), 1 3/8″ 21-spline (type 2), and 1 3/4″ 20-spline (type 3) options to fit the specific tractor connection needed. Optionally 1 1/2″ 8-spline and 1 3/4″ 6-spline options are available. Lawn & Turf tractor yokes are offered in 1″ 10-spline and 1″ 15-spline.
Neapco 8-2420 PTO End Yoke
8-2420 Power Take Off End Yoke
Part Number 8-2420
Application: Automotive/Ag./Ind. PTO
Bore Size & Shape(In)(Mm): 1.891 Outer Profile
Bore Type: Outer Tube Profile
Center Line To End Of Hub (In): 3.781
Driveline Series: W2400
Agricultural & Construction Machinery
Neapco 22-2317 PTO QD Yoke
22-2317 Power Take Off Quick Disconnect Yoke
Part Number 22-2317
Application: Automotive/Ag./Ind. PTO
Bore Size & Shape(In)(Mm): 1.375-21 Involute Spline
Bore Type: Splined
Center Line To End Of Hub (In): 4.810
Driveline Series: 2200
End Of Hub To Set Screw (In): 1.000
Hub Diameter (In): 2.280
Set Screw Location: Gap
Set Screw Thread Size (In)(Mm): 0.560
Agricultural & Construction Machinery
Reviews
There are no reviews yet.