| Asin | B09J8JK5VN |
|---|---|
| Dimensions | |
| Weight | |
| Manufacturer | Generic |
Bison Gear & Engineering 021-730F0030 – PowerSTAR Right Angle Brushed DC Gearmotor – 30 : 1 Ratio, 1/3 hp, 180 V, TENV, Face/Foot Mount
Additional information
Reviews (0)
Be the first to review “Bison Gear & Engineering 021-730F0030 – PowerSTAR Right Angle Brushed DC Gearmotor – 30 : 1 Ratio, 1/3 hp, 180 V, TENV, Face/Foot Mount”
Related products
- motor type: Brushed Gearmotor
- duty cycle: Continuous
- shaft type: Right Angle
- over hung load: 1050 lbs
- input horsepower: 1/4 hp
- motor type: Brushed Gearmotor
- ip rating: IP43
- shaft type: Parallel
- duty cycle: Continuous
- input horsepower: 1/10 hp
Electric Motors
Baldor Reliance RL1307A HVAC Motor
Performance at 230 V, 60 Hz, 0.75 hp
Typical performance; not guaranteed values.General Characteristics
Full Load Torque 0 LB-FT
No-Load Current 0 A
Line-Line Res. @ 25° C 3.1 Ohms A Ph / 1.64 Ohms B Ph
Temp. Rise @ Rated Load 74° C
Temp. Rise @ S.F. Load 90° C
Start Configuration DOL
Break-Down Torque 5.5 LB-FT
Pull-Up Torque 4.5 LB-FT
Locked-Rotor Torque 9.5 LB-FT
Starting Current 31 A
Load Characteristics
| Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. |
|---|---|---|---|---|---|---|---|---|
| Power Factor | 22.0 | 35.0 | 49.0 | 63.0 | 70.0 | 76.0 | 80.0 | 76.0 |
| Efficiency | 0.0 | 45.4 | 59.1 | 62.7 | 66.7 | 66.8 | 64.4 | 66.8 |
| Speed (RPM) | 1,796 | 1,783 | 1,770 | 1,754 | 1,737 | 1,717 | 1,692 | 1,717 |
| Line Amps | 3.90 | 4.05 | 4.25 | 4.80 | 5.30 | 6.10 | 7.00 | 6.10 |
- motor type: Brushed Gearmotor
- duty cycle: Continuous
- shaft type: Right Angle
- over hung load: 355 lbs
- input horsepower: 1/5 hp
- motor type: Brushed Gearmotor
- ip rating: IP43
- shaft type: Parallel
- duty cycle: Continuous
- input horsepower: 1/4 hp
- motor type: Brushed Gearmotor
- ip rating: IP43
- shaft type: Parallel
- duty cycle: Continuous
- input horsepower: 1/20 hp
Reviews
There are no reviews yet.