Fully interchangeable by component with other tapered grid couplingsProvide torsional damping to reduce torsional vibration and cushion shock loadsGrids act much like a protective overload shear device during overloads to protect expensive, connected equipmentQuick and easy installation with low maintenanceSpeicfication: bore diameter: 0 to 1.3750 inhub material: Carbon Steellength through bore: 2.3800 in
2273126 Grid Coupling Hub – Cplg Size: 1050, Bore: Finished w/Keyway, Material: Carbon Steel
SKU: B09H7GTXT6
Category: Multi-Flex
Description
Additional information
Asin | B09H7GTXT6 |
---|---|
Dimensions | |
Weight | |
Manufacturer | Generic |
Reviews (0)
Be the first to review “2273126 Grid Coupling Hub – Cplg Size: 1050, Bore: Finished w/Keyway, Material: Carbon Steel” Cancel reply
Related products
Lovejoy L-AL 110 Solid Type Jaw Coupling SOX/NBR Rubber Spider
Specifications
Description |
L/AL110 SPIDER SOX |
Coupling Type |
Jaw |
Material |
SOX (NBR) Rubber |
Insert Style |
Solid |
Color |
Black |
Type |
Elastomeric Insert |
Weight |
0.16 lb |
Gear & Sleeve
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
Specifications
Description |
8E SLEEVE |
Coupling Size |
8E |
Sleeve Type |
E |
Type |
Sleeves for S-Flex Endurance Couplings |
Material |
EPDM |
Color |
Black |
Connection Type A x B |
Coupling Sleeve |
Weight |
1.15 lb |
Nominal Torque |
1475 in·lb166.66 N·m |
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
- Lovejoy offers flexible sleeves for S-Flex Endurance couplings in three designs: one-piece solid, one-piece split, and two-piece with retaining ring
- The one-piece split design provides solutions for applications with unique requirements where small shaft separations inhibit the installation of a one-piece solid sleeve
- Pre-molded teeth along the diameter of the sleeve engage with teeth of the coupling flanges
- No clamps or screws are needed to connect the flanges with the
- For use with Lovejoy C type (Medium duty) Jaw style flexible coupling assembly (sold separately)
- Cast iron for non-corrosive applications where strength and heat dissipation are factors and weight is not
- Transfers shock and misalignment to the center element of the coupling assembly for reduced wear on the shaft assembly
Lovejoy 68514426088 L095 Standard Jaw Coupling Hub Sintered Iron 0.5in bore KW
Specifications
Description |
L095 HUB 1/2 1/8X1/16KW |
Hub Style |
1 |
Coupling Type |
Jaw |
Material |
Sintered Iron |
Color |
Metallic |
# of Jaws |
3 |
Elastomeric Member |
SOX (NBR) Rubber |
Weight |
0.79 lb |
Weight (Complete Coupling w/ Max. Bores) |
1.80 lb |
Weight (Complete Coupling w/ Min. Bores) |
1.30 lb |
- For use with Lovejoy E type S-Flex series flexible coupling assembly (sold separately)
- EPDM synthetic rubber for transferring and absorbing shock load
- Teeth help distribute the torsional load across the sleeve and flanges, reducing wear and extending service life
- Country of origin: United States
Lovejoy L-AL 075 Open Center Urethane Type Jaw Coupling Elastomer
Specifications
Description |
L/AL075 SPIDER URE OCT 3/4 |
Coupling Type |
Jaw |
Material |
Urethane |
Insert Style |
Open Center |
Color |
Blue |
Type |
Elastomeric Insert |
Weight |
0.03 lb |
Lovejoy CJ 19 Curved Jaw Coupling Urethane Spider 92 Shore A Yellow
Specifications
Description |
CJ 19 SPIDER 92A YELLOW |
Type |
Jaw |
Spider Type |
92 Shore A |
Material |
Polyurethane |
Style |
Open Center |
Color |
Yellow |
Coupling Type |
Elastomeric Insert |
Stock Sizes |
14 - 180 |
Weight |
0.03 lb |
Lovejoy CJ 19 Curved Jaw Coupling Urethane Spider 92 Shore A Yellow Dimensional Data
Multi-Flex
Lovejoy 68514426082 22 Saga Coupling, 1" x 1" Bore, 3" Length Through Bore, 7.31" OD, 8.69" OAL
- General purpose, torsionally soft coupling
- Two hubs connected with a SAGA donut
- Has a high tolerance for all forms of misalignment
- Country of origin: United States
- For use with Lovejoy curved jaw style flexible coupling assembly (sold separately)
- Urethane for transferring and absorbing shock load
- Absorbs shock and misalignment within the coupling assembly for reduced wear on the shaft assembly
- Country of origin: Poland
Reviews
There are no reviews yet.