A SAGA coupling is a general purpose, torsionally soft coupling with high tolerance to all forms of misalignment. A complete SAGA coupling is comprised of 2 hubs, an elastomeric donut, and hardware.
Description
Additional information
Asin | B013T0XVXK |
---|---|
Dimensions | |
Weight | |
Manufacturer |
Reviews (0)
Be the first to review “Lovejoy 68514422304 30 Saga Donut with Hardware, 9.63" OD” Cancel reply
Related products
- For use with Lovejoy C type (Medium duty) Jaw style flexible coupling assembly (sold separately)
- Cast iron for non-corrosive applications where strength and heat dissipation are factors and weight is not
- Transfers shock and misalignment to the center element of the coupling assembly for reduced wear on the shaft assembly
Lovejoy 5JE Solid Design S-Flex Coupling EPDM Rubber Sleeve
Specifications
Description |
5JE SLEEVE |
Coupling Size |
5JE |
Sleeve Type |
JE |
Type |
Sleeves for S-Flex Endurance Couplings |
Material |
EPDM |
Color |
Black |
Connection Type A x B |
Coupling Sleeve |
Weight |
0.30 lb |
Nominal Torque |
312 in·lb35.26 N·m |
- Urethane for transferring and absorbing shock load
- Absorbs shock and misalignment within the coupling assembly for reduced wear on the shaft assembly
- Unit count: 1.0
- Included components: Spider
- Package Dimensions: 5.25" (L) x 5.25" (W) x 1.0" (H)
- Product Type: Bearings And Bushings
- Package Quantity: 1
- Country Of Origin: United States
- For use with Lovejoy curved jaw style flexible coupling assembly (sold separately)
- Urethane for transferring and absorbing shock load
- Absorbs shock and misalignment within the coupling assembly for reduced wear on the shaft assembly
- Country of origin: Poland
Gear & Sleeve
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
Specifications
Description |
8E SLEEVE |
Coupling Size |
8E |
Sleeve Type |
E |
Type |
Sleeves for S-Flex Endurance Couplings |
Material |
EPDM |
Color |
Black |
Connection Type A x B |
Coupling Sleeve |
Weight |
1.15 lb |
Nominal Torque |
1475 in·lb166.66 N·m |
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
- Lovejoy offers flexible sleeves for S-Flex Endurance couplings in three designs: one-piece solid, one-piece split, and two-piece with retaining ring
- The one-piece split design provides solutions for applications with unique requirements where small shaft separations inhibit the installation of a one-piece solid sleeve
- Pre-molded teeth along the diameter of the sleeve engage with teeth of the coupling flanges
- No clamps or screws are needed to connect the flanges with the
Reviews
There are no reviews yet.