TB Woods TL4040312
TB Woods TL4040312
3 1/2 in. Bore, Taper-Lock™ Bushing, Size 4040, Steel Material
Model: TL4040312
The Taper-Lock™ bushing system keeps the sprocket hubs narrow so the length-thru-bore dimension is less than ever before. The left-justified hub design allows shaft mounting close to bearings, keeping the center of load dimension small while preventing issues with high overhung loads.\n\nTaper-Lock™ bushings are split through the flange and gradual taper to provide a true clamp fit on the shaft that is the equivalent of a shrink fit.
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
- Cast iron for resistance to wear, galling, and corrosion
- Keyed to the shaft to prevent the shaft from rotating in the bushing
- Interchangeable with taper lock bushings from various manufacturers
Description
Additional information
Asin | B004LDK836 |
---|
Reviews (0)
Be the first to review “TB Woods TL4040312” Cancel reply
Related products
Boston Gear XFCA30 Polyurethane Shaft Coupling Insert
Boston Gear Polyurethane Spider insert - Boston Gear FC30 and SSFC30
- Size - Jaw Couplings: FC30
- Material - Spiders: Polyurethane
- Rated Torque: 1,500 in-lb
- Max. RPM: 3,600 RPM
- HP Rating @ 100 RPM: 2.20
- Temp. Range: -32 Degrees to 200 Degrees F
- Serviceable Temp. Range (F): -32 to 200
Automotive
Spicer 5004989 U-Joint Kit
Couplings
BOSTON GEAR SSFC12 Jaw Coupling Hub
- Size - Jaw Couplings: SSFC12
- Keyway Size Type: 1/8 in x 1/16 in
- Material - Hubs: Stainless Steel
- Outside Dia.: 1.25 in
- Assembled Coupling Length: 2.31 in
- Overall Length: 2.31 in
- Size: SSFC12
Couplings
Boston Gear FC45 2in Steel FC Coupling
PRODUCT DETAILS
- Size FC45 Coupling Hub
- 2" Bore
FEATURES
- No lubricant required
- Complete with keyway and setscrew
- Precision machined
MFR # FC45 2 HALF HUB 08310
Spicer SPL55-1X U-Joint Kit 1480-SPL55 Series
Automotive
Spicer 5-153X U-Joint Kit 1310 Series
Spicer greaseable universal joint with snap rings
- Outside Snap Ring Style (OSR)
- 1310 Series
- Bearing Cap Diameter: 1.062 inches
- Bearing Cap to Bearing Cap: 3.219 inches
Couplings
Spicer 5-2031X Universal Joint
- Ford Custom 1957-49, Custom 300 1959-57, Customline 1956-52, Galaxia 1959; Mercury Monterey 1954-50; Oldsmobile 88 1950, 98 1952-50; Pontiac Catalina 1955-50
- The package length is 10.16 inches
- The package height is 10.16 inches
- The package width is 3.65 inches
Spicer SPL70X U-Joint Kit 1550 SPL70 Series OSR
Fits as follows: 2011-2017 Dodge Ram 4500 & ST Series - AWD & RWD with 3, 2 or 1 piece drive shafts 2011-2017 Dodge Ram 5500 & ST Series - AWD & RWD with 3, 2 or 1 piece drive shafts 2013-2017 Dodge Ram 2500 & SXT & ST Series - AWD & RWD with 3, 2 or 1 piece drive shafts 2013-2017 Dodge Ram 2500 & SXT & ST Series - AWD & RWD with 3, 2 or 1 piece drive shaftsAgricultural & Construction Machinery
Spicer 5-134X U-Joint Kit 1310-1330 Series OSR
- Spicer greaseable universal joint with snap rings
- Outside Snap Ring Style (OSR)
- 1310/1330 Series
- Bearing Cap Diameter: 1.062 inches
- Bearing Cap to Bearing Cap (1): 3.219 inches / Bearing Cap to Bearing Cap (2): 3.625 inches
- Spicer genuine OE replacement
- Outside snap rings
- Outside to outside dimension: 3.219 inch
- Bearing cup size: 1.062 inch
- 1-0134, CP134X, 353
Automotive
Spicer 5-1503X U-Joint Kit
- Package Dimensions: 8.89 L x 9.144 W x 3.555 H (centimetres)
- Chevrolet Tracker 2004-99; Dodge Challenger 1983-81, Colt 1990-71, D-Series Truck 1982-80, Power Ram 50 1986-83, Raider 1989-87, Ram 50 1993-83
- Package Weight: 0.6 pounds
- Country of Origin : United States
Automotive
Spicer 5-3616X 1410 Series U-Joint Kit
COATED for ALUMINUM DRIVESHAFTS Dana Spicer 5-3616X is a solid body 1410 series universal joint with 4 zinc phosphate coated bearing caps specifically designed for aluminum driveshafts to eliminate corrosion caused by electrolysis. Fits light truck aluminum driveshaft applications that require a 1410 coated u-joint.Agricultural & Construction Machinery
Spicer SPL70-1X U-Joint Kit 1550 SPL70 Series OSR
as follows: 2011-2017 Dodge Ram 4500 & ST Series - AWD & RWD with 3, 2 or 1 piece drive shafts 2011-2017 Dodge Ram 5500 & ST Series - AWD & RWD with 3, 2 or 1 piece drive shafts 2013-2017 Dodge Ram 2500 & SXT & ST Series - AWD & RWD with 3, 2 or 1 piece drive shafts 2013-2017 Dodge Ram 2500 & SXT & ST Series - AWD & RWD with 3, 2 or 1 piece drive shaftsAgricultural & Construction Machinery
Spicer 5-3203X Non-Greaseable Universal Joint
Fits Lincoln - 2006-07 Mark LT , 2005-06 Navigator , Ford - 2004-07 F-150 , 2004 F-150 Heritage
Spicer 5-7437X U-Joint Kit 7290-1330 SPL25 Series
- Spicer Life non-greaseable universal joint with snap rings
- Inside and Outside Snap Ring Style
- Bearing Cap Diameter (OSR): 1.062 inches / Bearing Cap Diameter (ISR): 1.125 inches
- Bearing Cap to Bearing Cap (OSR): 3.625 inches / Length Between Snap Rings (ISR): 2.625 inches
- Spicer genuine OE replacement
- Inside and outside snap rings
- Outside to outside dimension: 3.625 inch; outside bearing cup dimension: 1.062 inch
- Inside to inside dimension: 2.625 inch; inside bearing cup dimension: 1.125 inch
- 2-0355, 458
- These Universal Joints Fit Dodge Trucks as follows:1992-1999 DODGE Dakota1994-1999 DODGE RAM 1500 1999 DODGE RAM 1500 Van 1998-1999 DODGE RAM 2500 1998-1999 DODGE RAM 2500 Van 1997-1999 DODGE RAM 3500 1999 DODGE RAM 3500 Van 1998 DODGE B1500 1998 DODGE B2500 1999 DODGE Durango
Spicer 5-3206X U-Joint Kit AAM 1485 Series OSR
1485 series AAM Universal Joints for CHEVY, GMC and DODGE 2WD light trucks and 4x4 trucks.
- 1485 series AAM Fits driveshafts made by American Axle ONLY.
- 4.181 inches wide in both directions across bearing caps
- All 4 bearing caps are 1.375 inch (1 3/8) diameter
- Designed for Outside snap ring style driveshaft yokes and also Locating Tab style pinion yokes, transmission yokes and transfer case yokes
- Commonly used in CHEVY, GMC and Dodge light truck and diesel 4x4 driveshafts as well as many other vehicles.
IMPORTANT... The 1485 series AAM universal joint is just .007 NARROWER than the Spicer 1480 series.
Boston Gear XFCR45 Rubber Shaft Coupling Insert
Boston Gear Rubber Spider Insert for Boston Gear FC45 and SSFC45- Size - Jaw Couplings: FC45
- Material - Spiders: Synthetic Rubber
- Rated Torque: 2,800 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 4.40
- Temp. Range: -32 Degrees to 200 Degrees F
- Coupling Size: FC45
-
XFCR45 RUBBER INSERT 08090
Agricultural & Construction Machinery
Spicer SPL55X U-Joint Kit 1480-SPL55 Series OSR
Greaseable N Type OSR Style Invoice U-Joint Kit OEM Mfg Spicer OEM Series 1480/SPL55 Bearing Cap Diameter (1) 1.375 Bearing Cap Diameter (2) 1.375 SR(1)Brng Cap to Brng Cap(OSR) 4.188 SR(2)Brng Cap to Brng Cap(OSR) 4.188 VMRS 024002046 Bearing Cap Type Round Snap Ring Type External Snap Ring Included Y Material Steel Hardware Included N Length A (In) 4.188 Length B (In) 4.188 Length A (mm) 106.4 Length B (mm) 106.4 Bearing Cap Type A OSR Bearing Cap Type B OSR Bearing Cap Diameter A (mm) 34.9 Bearing Cap Diameter B (mm) 34.9Automotive
Spicer 5-188X U-Joint Kit 1480 Series OSR
- Spicer greaseable universal joint with snap rings
- Outside Snap Ring Style (OSR)
- 1480 Series
- Bearing Cap Diameter: 1.375 inches
- Bearing Cap to Bearing Cap: 4.188 inches
- Spicer genuine OE replacement
- Outside snap rings
- Outside to outside dimension: 4.188 inch
- Bearing cup size: 1.375 inch
- 3-0188, CP188X, 351
Agricultural & Construction Machinery
Spicer 5-1410X U-Joint Kit 1410 SPL36 Series OSR
Greaseable N Type OSR Style Invoice U-Joint Kit OEM Mfg Spicer OEM Series 1410/SPL36 Bearing Cap Diameter (1) 1.188 Bearing Cap Diameter (2) 1.188 SR(1)Brng Cap to Brng Cap(OSR) 4.188 SR(2)Brng Cap to Brng Cap(OSR) 4.188 VMRS 024002046 Bearing Cap Type Round Snap Ring Type External Snap Ring Included Y Material Steel Hardware Included N Length A (In) 4.188 Length B (In) 4.188 Length A (mm) 106.4 Length B (mm) 106.4 Bearing Cap Type A OSR Bearing Cap Type B OSR Bearing Cap Diameter A (mm) 1.188 Bearing Cap Diameter B (mm) 1.188
Boston Gear SSFC20-5/8 SS Jaw coupling hub
- Size - Jaw Couplings: SSFC20
- Keyway Size Type: 3/16 in x 3/32 in
- Material - Hubs: Stainless Steel
- Outside Dia.: 2 in
- Assembled Coupling Length: 3.69 in
- Overall Length: 3.69 in
- UPC 884107384214
Agricultural & Construction Machinery
Spicer 5-793X U-Joint Kit 1330 S44 Series OSR
- Spicer Life non-greaseable universal joint with snap rings
- Inside and Outside Snap Ring Style (1330 OSR / S44 ISR)
- 1330/S44 Series
- Bearing Cap Diameter (OSR): 1.062 inches / Bearing Cap Diameter (ISR): 1.125 inches
- Bearing Cap to Bearing Cap (OSR): 3.625 inches / Length Between Snap Rings (ISR): 2.556 inches
- Spicer genuine OE replacement
- Inside and outside snap rings
- Outside to outside dimension: 3.625 inch; outside bearing cup dimension: 1.062 inch
- Inside to inside dimension: 2.556 inch; inside bearing cup dimension: 1.125 inch
- 2-0793, 290
Couplings
Boston Gear FC20-3/4 Shaft Coupler hub
- Product Description
- Steel Jaw Coupling Hubs connect to drive shafts to provide dependable power transfer in high-temperature applications. A complete assembly requires two hubs and one jaw coupling spider, available separately.
Automotive
Spicer 5-3230X U-Joint Kit
Description
Universal Joint Non-Greaseable; AAM1555 Series
Fits 2007-2012 Dodge RAM
Automotive
Spicer 5-789X U-Joint Kit 7260 Series
- Spicer Life non-greaseable axle shaft universal joint with snap rings
- Inside Snap Ring Style (ISR)
- 1310WJ Series
- Bearing Cap Diameter: 1.188 inches
- Length Between Snap Rings: 2.188 inches
Reviews
There are no reviews yet.