TB Woods TL4040312
TB Woods TL4040312
3 1/2 in. Bore, Taper-Lock™ Bushing, Size 4040, Steel Material
Model: TL4040312
The Taper-Lock™ bushing system keeps the sprocket hubs narrow so the length-thru-bore dimension is less than ever before. The left-justified hub design allows shaft mounting close to bearings, keeping the center of load dimension small while preventing issues with high overhung loads.\n\nTaper-Lock™ bushings are split through the flange and gradual taper to provide a true clamp fit on the shaft that is the equivalent of a shrink fit.
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
- Cast iron for resistance to wear, galling, and corrosion
- Keyed to the shaft to prevent the shaft from rotating in the bushing
- Interchangeable with taper lock bushings from various manufacturers
Description
Additional information
Asin | B004LDK836 |
---|
Reviews (0)
Be the first to review “TB Woods TL4040312” Cancel reply
Related products
Boston Gear SSFC20 SOLID Jaw Coupling Hub
Key Features
- Item - Jaw Coupling Hubs: Jaw Coupling Hub
- Size - Jaw Couplings: SSFC20
- Keyway Size Type: None
- Material - Hubs: Stainless Steel
- Outside Dia.: 2 in
- Assembled Coupling Length: 3.69 in
- Material: Stainless Steel
- Overall Length: 3.69 in
Spicer 5-1310X U-Joint Kit 1310-SPL22 Series OSR
- Spicer Life non-greaseable universal joint with snap rings
- Outside Snap Ring Style (OSR)
- 1310/SPL22 Series
- Bearing Cap Diameter: 1.062 inches
- Bearing Cap to Bearing Cap: 3.219 inches
Automotive
Spicer 5-105X Greaseable Universal Joint
5-105X Universal Joint
Description
Universal Joint Greaseable 1110 Series
Spicer 5-7437X U-Joint Kit 7290-1330 SPL25 Series
- Spicer Life non-greaseable universal joint with snap rings
- Inside and Outside Snap Ring Style
- Bearing Cap Diameter (OSR): 1.062 inches / Bearing Cap Diameter (ISR): 1.125 inches
- Bearing Cap to Bearing Cap (OSR): 3.625 inches / Length Between Snap Rings (ISR): 2.625 inches
- Spicer genuine OE replacement
- Inside and outside snap rings
- Outside to outside dimension: 3.625 inch; outside bearing cup dimension: 1.062 inch
- Inside to inside dimension: 2.625 inch; inside bearing cup dimension: 1.125 inch
- 2-0355, 458
- These Universal Joints Fit Dodge Trucks as follows:1992-1999 DODGE Dakota1994-1999 DODGE RAM 1500 1999 DODGE RAM 1500 Van 1998-1999 DODGE RAM 2500 1998-1999 DODGE RAM 2500 Van 1997-1999 DODGE RAM 3500 1999 DODGE RAM 3500 Van 1998 DODGE B1500 1998 DODGE B2500 1999 DODGE Durango
Automotive
Spicer 5-155X U-Joint Kit 1550 Series OSR
Alternate/Interchange Part: Spicer SPL70X U-Joint (Non Greasable) Neapco 3-0155G U-Joint (Non Greasable) Spicer SPL70-1X U-Joint (Greasable) moog-358, moog-358R, moog-424 AMP4372719, D45166, S300313, 5V5474, AT114511, 2400938, D74601, 213882R91, 155DS3, 85615209, 840733200, 840599400, 840548500Automotive
Spicer 5-3230X U-Joint Kit
Description
Universal Joint Non-Greaseable; AAM1555 Series
Fits 2007-2012 Dodge RAM
Spicer 5-1310-1X U-Joint Kit 1310/SPL22 Series
5-1310-1X Universal Joint
Description
Universal Joint; Greaseable
Automotive
Spicer 5-1350X U-Joint Kit 1350/SPL30 Series
5-1350X Universal Joint
Description
Universal Joint; Non-Greaseable
Boston Gear SSFC20-5/8 SS Jaw coupling hub
- Size - Jaw Couplings: SSFC20
- Keyway Size Type: 3/16 in x 3/32 in
- Material - Hubs: Stainless Steel
- Outside Dia.: 2 in
- Assembled Coupling Length: 3.69 in
- Overall Length: 3.69 in
- UPC 884107384214
Agricultural & Construction Machinery
Spicer 5-134X U-Joint Kit 1310-1330 Series OSR
- Spicer greaseable universal joint with snap rings
- Outside Snap Ring Style (OSR)
- 1310/1330 Series
- Bearing Cap Diameter: 1.062 inches
- Bearing Cap to Bearing Cap (1): 3.219 inches / Bearing Cap to Bearing Cap (2): 3.625 inches
- Spicer genuine OE replacement
- Outside snap rings
- Outside to outside dimension: 3.219 inch
- Bearing cup size: 1.062 inch
- 1-0134, CP134X, 353
Agricultural & Construction Machinery
Spicer 5-795X U-Joint Kit S44 Series ISR
- Spicer Life non-greaseable universal joint with snap rings
- Inside Snap Ring Style (ISR)
- S44 Series
- Bearing Cap Diameter: 1.125 inches
- Length Between Snap Rings: 2.556 inches
Automotive
Spicer 5-3616X 1410 Series U-Joint Kit
COATED for ALUMINUM DRIVESHAFTS Dana Spicer 5-3616X is a solid body 1410 series universal joint with 4 zinc phosphate coated bearing caps specifically designed for aluminum driveshafts to eliminate corrosion caused by electrolysis. Fits light truck aluminum driveshaft applications that require a 1410 coated u-joint.
Boston Gear SSFC20-1 Jaw Coupling Hub 1/4 in x 1/8 in KW
SSFC Series Insert (3 Jaw) Type Couplings are made of 316 Stainless Steel and are available with precision machined bored or solid hubs. The SSFC Series coupling offers three types of inserts for different service requirements.
Spicer 5-3206X U-Joint Kit AAM 1485 Series OSR
1485 series AAM Universal Joints for CHEVY, GMC and DODGE 2WD light trucks and 4x4 trucks.
- 1485 series AAM Fits driveshafts made by American Axle ONLY.
- 4.181 inches wide in both directions across bearing caps
- All 4 bearing caps are 1.375 inch (1 3/8) diameter
- Designed for Outside snap ring style driveshaft yokes and also Locating Tab style pinion yokes, transmission yokes and transfer case yokes
- Commonly used in CHEVY, GMC and Dodge light truck and diesel 4x4 driveshafts as well as many other vehicles.
IMPORTANT... The 1485 series AAM universal joint is just .007 NARROWER than the Spicer 1480 series.
Boston Gear XFCR45 Rubber Shaft Coupling Insert
Boston Gear Rubber Spider Insert for Boston Gear FC45 and SSFC45- Size - Jaw Couplings: FC45
- Material - Spiders: Synthetic Rubber
- Rated Torque: 2,800 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 4.40
- Temp. Range: -32 Degrees to 200 Degrees F
- Coupling Size: FC45
-
XFCR45 RUBBER INSERT 08090
Agricultural & Construction Machinery
Spicer SPL70-1X U-Joint Kit 1550 SPL70 Series OSR
as follows: 2011-2017 Dodge Ram 4500 & ST Series - AWD & RWD with 3, 2 or 1 piece drive shafts 2011-2017 Dodge Ram 5500 & ST Series - AWD & RWD with 3, 2 or 1 piece drive shafts 2013-2017 Dodge Ram 2500 & SXT & ST Series - AWD & RWD with 3, 2 or 1 piece drive shafts 2013-2017 Dodge Ram 2500 & SXT & ST Series - AWD & RWD with 3, 2 or 1 piece drive shaftsCouplings
Boston Gear FC20-9/16 Jaw coupling hub
- Size - Jaw Couplings: FC20
- Keyway Size Type: 1/8 in x 1/16 in
- Material - Hubs: Steel
- Outside Dia.: 2 in
- Assembled Coupling Length: 3.69 in
- Keyway Size: 1/8" x 1/16"
- Overall Length: 3.69 in
Automotive
Spicer 5-2173X Universal Joint
5-2173X Universal Joint
Description
Universal Joint; Greaseable
Automotive
Spicer 5-188X U-Joint Kit 1480 Series OSR
- Spicer greaseable universal joint with snap rings
- Outside Snap Ring Style (OSR)
- 1480 Series
- Bearing Cap Diameter: 1.375 inches
- Bearing Cap to Bearing Cap: 4.188 inches
- Spicer genuine OE replacement
- Outside snap rings
- Outside to outside dimension: 4.188 inch
- Bearing cup size: 1.375 inch
- 3-0188, CP188X, 351
Couplings
Spicer 5-2031X Universal Joint
- Ford Custom 1957-49, Custom 300 1959-57, Customline 1956-52, Galaxia 1959; Mercury Monterey 1954-50; Oldsmobile 88 1950, 98 1952-50; Pontiac Catalina 1955-50
- The package length is 10.16 inches
- The package height is 10.16 inches
- The package width is 3.65 inches
Automotive
Spicer 5-789X U-Joint Kit 7260 Series
- Spicer Life non-greaseable axle shaft universal joint with snap rings
- Inside Snap Ring Style (ISR)
- 1310WJ Series
- Bearing Cap Diameter: 1.188 inches
- Length Between Snap Rings: 2.188 inches
Agricultural & Construction Machinery
Spicer 5-793X U-Joint Kit 1330 S44 Series OSR
- Spicer Life non-greaseable universal joint with snap rings
- Inside and Outside Snap Ring Style (1330 OSR / S44 ISR)
- 1330/S44 Series
- Bearing Cap Diameter (OSR): 1.062 inches / Bearing Cap Diameter (ISR): 1.125 inches
- Bearing Cap to Bearing Cap (OSR): 3.625 inches / Length Between Snap Rings (ISR): 2.556 inches
- Spicer genuine OE replacement
- Inside and outside snap rings
- Outside to outside dimension: 3.625 inch; outside bearing cup dimension: 1.062 inch
- Inside to inside dimension: 2.556 inch; inside bearing cup dimension: 1.125 inch
- 2-0793, 290
Agricultural & Construction Machinery
Spicer SPL55X U-Joint Kit 1480-SPL55 Series OSR
Greaseable N Type OSR Style Invoice U-Joint Kit OEM Mfg Spicer OEM Series 1480/SPL55 Bearing Cap Diameter (1) 1.375 Bearing Cap Diameter (2) 1.375 SR(1)Brng Cap to Brng Cap(OSR) 4.188 SR(2)Brng Cap to Brng Cap(OSR) 4.188 VMRS 024002046 Bearing Cap Type Round Snap Ring Type External Snap Ring Included Y Material Steel Hardware Included N Length A (In) 4.188 Length B (In) 4.188 Length A (mm) 106.4 Length B (mm) 106.4 Bearing Cap Type A OSR Bearing Cap Type B OSR Bearing Cap Diameter A (mm) 34.9 Bearing Cap Diameter B (mm) 34.9
Reviews
There are no reviews yet.