TB Woods 703.51.4753
TB Woods 703.51.4753
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
SKU: B078YC42LG
Categories: Beam, Couplings, Collars & Universal Joiners, Flexible Couplings
Tags: beam coupling, Huco, tb Woods
Description
Coupling Type MultiBeam Coupling
Size 51
Material Stainless Steel
Max Bore B1 (mm) 26
Min Bore B1 (mm) 10
Max Bore B2 (mm) 26
Min Bore B2 (mm) 16
Angular Compensation, Max (degrees) 7
Bore Tolerance (mm) +0.03 / -0.00
Fastener Screw Size M6
Fastener Screw Torque (Nm) 9.75
Fastener Wrench Size (mm) 5
Max Speed (rpm) 5000
Operating Temperature (°C) -40 to +140
Peak Torque (Nm) 73
Radial Compensation, Max (mm) 0.9
Resists Axial Load Yes
Shaft Connection Clamp
Torsional Stiffness (Nm/rad) 1305
Mass (Weight) (kgs) 1.116
[D] Outside Diameter (mm) 50.8
L1 Dimension (mm) 25
[L] Length (mm) 95.3
[L] Overall Length (mm) 95.3
Item Note
Coupling load capacity depends on the operating load cycle. Refer to catalog for further sizing information.
Additional information
Asin | B078YC42LG |
---|
Reviews (0)
Be the first to review “TB Woods 703.51.4753” Cancel reply
Related products
Agricultural & Construction Machinery
Spicer SPL70-1X U-Joint Kit 1550 SPL70 Series OSR
as follows: 2011-2017 Dodge Ram 4500 & ST Series - AWD & RWD with 3, 2 or 1 piece drive shafts 2011-2017 Dodge Ram 5500 & ST Series - AWD & RWD with 3, 2 or 1 piece drive shafts 2013-2017 Dodge Ram 2500 & SXT & ST Series - AWD & RWD with 3, 2 or 1 piece drive shafts 2013-2017 Dodge Ram 2500 & SXT & ST Series - AWD & RWD with 3, 2 or 1 piece drive shafts
Boston Gear SSFC20 SOLID Jaw Coupling Hub
Key Features
- Item - Jaw Coupling Hubs: Jaw Coupling Hub
- Size - Jaw Couplings: SSFC20
- Keyway Size Type: None
- Material - Hubs: Stainless Steel
- Outside Dia.: 2 in
- Assembled Coupling Length: 3.69 in
- Material: Stainless Steel
- Overall Length: 3.69 in
Automotive
Spicer 5-789X U-Joint Kit 7260 Series
- Spicer Life non-greaseable axle shaft universal joint with snap rings
- Inside Snap Ring Style (ISR)
- 1310WJ Series
- Bearing Cap Diameter: 1.188 inches
- Length Between Snap Rings: 2.188 inches
Automotive
Spicer 5-2173X Universal Joint
5-2173X Universal Joint
Description
Universal Joint; Greaseable
Boston Gear XFCA30 Polyurethane Shaft Coupling Insert
Boston Gear Polyurethane Spider insert - Boston Gear FC30 and SSFC30
- Size - Jaw Couplings: FC30
- Material - Spiders: Polyurethane
- Rated Torque: 1,500 in-lb
- Max. RPM: 3,600 RPM
- HP Rating @ 100 RPM: 2.20
- Temp. Range: -32 Degrees to 200 Degrees F
- Serviceable Temp. Range (F): -32 to 200
Automotive
Spicer 5-188X U-Joint Kit 1480 Series OSR
- Spicer greaseable universal joint with snap rings
- Outside Snap Ring Style (OSR)
- 1480 Series
- Bearing Cap Diameter: 1.375 inches
- Bearing Cap to Bearing Cap: 4.188 inches
- Spicer genuine OE replacement
- Outside snap rings
- Outside to outside dimension: 4.188 inch
- Bearing cup size: 1.375 inch
- 3-0188, CP188X, 351
Automotive
Spicer 5-3616X 1410 Series U-Joint Kit
COATED for ALUMINUM DRIVESHAFTS Dana Spicer 5-3616X is a solid body 1410 series universal joint with 4 zinc phosphate coated bearing caps specifically designed for aluminum driveshafts to eliminate corrosion caused by electrolysis. Fits light truck aluminum driveshaft applications that require a 1410 coated u-joint.
Spicer SPL55-1X U-Joint Kit 1480-SPL55 Series
The following parts may be used as alternates for this part:
Dana/Spicer 5-188X
Rockwell/Meritor CP188X
Borg Warner 114-588
Neapco 3-0188
Chrysler 1752307
Ford C1TT4724A
Ford C1TZ4635A
Ford F81Z4635CA
Ford F81Z4635CB
General Motors 100315
General Motors 2057289
General Motors 2341648
General Motors 2345726
General Motors 3737508
General Motors 3737589
General Motors 6268535
General Motors 15515792
General Motors 88934794
Precision 351
Agricultural & Construction Machinery
Spicer 5-793X U-Joint Kit 1330 S44 Series OSR
- Spicer Life non-greaseable universal joint with snap rings
- Inside and Outside Snap Ring Style (1330 OSR / S44 ISR)
- 1330/S44 Series
- Bearing Cap Diameter (OSR): 1.062 inches / Bearing Cap Diameter (ISR): 1.125 inches
- Bearing Cap to Bearing Cap (OSR): 3.625 inches / Length Between Snap Rings (ISR): 2.556 inches
- Spicer genuine OE replacement
- Inside and outside snap rings
- Outside to outside dimension: 3.625 inch; outside bearing cup dimension: 1.062 inch
- Inside to inside dimension: 2.556 inch; inside bearing cup dimension: 1.125 inch
- 2-0793, 290
Spicer 5-1310-1X U-Joint Kit 1310/SPL22 Series
5-1310-1X Universal Joint
Description
Universal Joint; Greaseable
BOSTON GEAR SSFC20 7/8 Jaw Coupling Hub w KW
Size - Jaw Couplings SSFC20
Bore Dia. 7/8 in
Keyway Size Type 3/16 in x 3/32 in
Material - Hubs Stainless Steel
Outside Dia. 2 in
Assembled Coupling Length 3.69 in
Overall Length 3.69 in
Manufacturer UPC Number 884107384238
Couplings
Boston Gear FC20-9/16 Jaw coupling hub
- Size - Jaw Couplings: FC20
- Keyway Size Type: 1/8 in x 1/16 in
- Material - Hubs: Steel
- Outside Dia.: 2 in
- Assembled Coupling Length: 3.69 in
- Keyway Size: 1/8" x 1/16"
- Overall Length: 3.69 in
Agricultural & Construction Machinery
Spicer SPL55X U-Joint Kit 1480-SPL55 Series OSR
Greaseable N Type OSR Style Invoice U-Joint Kit OEM Mfg Spicer OEM Series 1480/SPL55 Bearing Cap Diameter (1) 1.375 Bearing Cap Diameter (2) 1.375 SR(1)Brng Cap to Brng Cap(OSR) 4.188 SR(2)Brng Cap to Brng Cap(OSR) 4.188 VMRS 024002046 Bearing Cap Type Round Snap Ring Type External Snap Ring Included Y Material Steel Hardware Included N Length A (In) 4.188 Length B (In) 4.188 Length A (mm) 106.4 Length B (mm) 106.4 Bearing Cap Type A OSR Bearing Cap Type B OSR Bearing Cap Diameter A (mm) 34.9 Bearing Cap Diameter B (mm) 34.9Automotive
Spicer 5-101X 1100 Series U-Joint Kit
5-101X Universal Joint
Description
Universal Joint Non-Greaseable 1100 Series
Automotive
Spicer 5-105X Greaseable Universal Joint
5-105X Universal Joint
Description
Universal Joint Greaseable 1110 Series
Couplings
Spicer 5-3614X 1330 Series U-Joint Kit
Greaseable N Type OSR Style Invoice U-Joint Kit OEM Mfg Spicer OEM Series 1330 Bearing Cap Diameter (1) 1.062 Bearing Cap Diameter (2) 1.062 SR(1)Brng Cap to Brng Cap(OSR) 3.625 SR(2)Brng Cap to Brng Cap(OSR) 3.625 VMRS 024002046 Bearing Cap Type Round Snap Ring Type External Snap Ring Included Y Material Steel Bearing Cap Finish Coated Caps for Aluminum Driveshafts Hardware Included N Length A (In) 3.625 Length B (In) 3.625 Length A (mm) 92.075 Length B (mm) 92.075 Bearing Cap Type A OSR Bearing Cap Type B OSR Bearing Cap Diameter A (mm) 27 Bearing Cap Diameter B (mm) 27
Spicer 5-1310X U-Joint Kit 1310-SPL22 Series OSR
- Spicer Life non-greaseable universal joint with snap rings
- Outside Snap Ring Style (OSR)
- 1310/SPL22 Series
- Bearing Cap Diameter: 1.062 inches
- Bearing Cap to Bearing Cap: 3.219 inches
Beam
Huco 723.51.4848
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Agricultural & Construction Machinery
Spicer 5-795X U-Joint Kit S44 Series ISR
- Spicer Life non-greaseable universal joint with snap rings
- Inside Snap Ring Style (ISR)
- S44 Series
- Bearing Cap Diameter: 1.125 inches
- Length Between Snap Rings: 2.556 inches
Couplings
BOSTON GEAR FC-15-1/2 SHAFT COUPLING
Boston Gear FC15 1/2
Steel FC Coupling, Size 15, 1/2 in. Bore
MFR #FC15 1/2
Boston Gear SSFC20 3/4" SS Jaw Coupling Hub
Bore Dia. 3/4 in Keyway Size Type 3/16 in x 3/32 in Outside Dia. 2 in Assembled Coupling Length 3.69 in Keyway Size 3/16" x 3/32" Overall Length 3.69 in UPC Number 884107384221Beam
Huco 723.51.4747
Six Beam Coupling, Clamp, Relieved, 51mm OD, 3/4in. x 3/4in. Bores
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Boston Gear SSFC20-1 Jaw Coupling Hub 1/4 in x 1/8 in KW
SSFC Series Insert (3 Jaw) Type Couplings are made of 316 Stainless Steel and are available with precision machined bored or solid hubs. The SSFC Series coupling offers three types of inserts for different service requirements.
Reviews
There are no reviews yet.