TB Woods 703.51.4753
TB Woods 703.51.4753
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
SKU: B078YC42LG
Categories: Beam, Couplings, Collars & Universal Joiners, Flexible Couplings
Tags: beam coupling, Huco, tb Woods
Description
Coupling Type MultiBeam Coupling
Size 51
Material Stainless Steel
Max Bore B1 (mm) 26
Min Bore B1 (mm) 10
Max Bore B2 (mm) 26
Min Bore B2 (mm) 16
Angular Compensation, Max (degrees) 7
Bore Tolerance (mm) +0.03 / -0.00
Fastener Screw Size M6
Fastener Screw Torque (Nm) 9.75
Fastener Wrench Size (mm) 5
Max Speed (rpm) 5000
Operating Temperature (°C) -40 to +140
Peak Torque (Nm) 73
Radial Compensation, Max (mm) 0.9
Resists Axial Load Yes
Shaft Connection Clamp
Torsional Stiffness (Nm/rad) 1305
Mass (Weight) (kgs) 1.116
[D] Outside Diameter (mm) 50.8
L1 Dimension (mm) 25
[L] Length (mm) 95.3
[L] Overall Length (mm) 95.3
Item Note
Coupling load capacity depends on the operating load cycle. Refer to catalog for further sizing information.
Additional information
Asin | B078YC42LG |
---|
Reviews (0)
Be the first to review “TB Woods 703.51.4753” Cancel reply
Related products
Boston Gear XFCR45 Rubber Shaft Coupling Insert
Boston Gear Rubber Spider Insert for Boston Gear FC45 and SSFC45- Size - Jaw Couplings: FC45
- Material - Spiders: Synthetic Rubber
- Rated Torque: 2,800 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 4.40
- Temp. Range: -32 Degrees to 200 Degrees F
- Coupling Size: FC45
-
XFCR45 RUBBER INSERT 08090
Couplings
Spicer 5-2031X Universal Joint
- Ford Custom 1957-49, Custom 300 1959-57, Customline 1956-52, Galaxia 1959; Mercury Monterey 1954-50; Oldsmobile 88 1950, 98 1952-50; Pontiac Catalina 1955-50
- The package length is 10.16 inches
- The package height is 10.16 inches
- The package width is 3.65 inches
Couplings
Boston Gear FC20-7/8 Jaw coupling hub
Series | : | FC Series |
Coupling Size | : | FC20 |
Bore Diameter | : | 7/8 in |
Hub Diameter | : | 1-3/4 in |
Hub Length | : | 1-1/8 in |
Keyway Size | : | 3/16 x 3/32 in |
Maximum Speed | : | 1750 rpm |
Length Through Bore | : | 1-4/16 in |
Screw Size | : | 5/16-18 |
Material | : | Steel |
Automotive
Spicer 5-789X U-Joint Kit 7260 Series
- Spicer Life non-greaseable axle shaft universal joint with snap rings
- Inside Snap Ring Style (ISR)
- 1310WJ Series
- Bearing Cap Diameter: 1.188 inches
- Length Between Snap Rings: 2.188 inches
Boston Gear SSFC20-1 Jaw Coupling Hub 1/4 in x 1/8 in KW
SSFC Series Insert (3 Jaw) Type Couplings are made of 316 Stainless Steel and are available with precision machined bored or solid hubs. The SSFC Series coupling offers three types of inserts for different service requirements.Couplings
Boston Gear FC20-3/4 Shaft Coupler hub
Size - Jaw Couplings FC20
Bore Dia. 3/4 in
Keyway Size Type 3/16 in x 3/32 in
Material - Hubs Steel
Outside Dia. 2 in
Assembled Coupling Length 3.69 in
Overall Length 3.69 in
UNSPSC 31163003
- Product Description
- Steel Jaw Coupling Hubs connect to drive shafts to provide dependable power transfer in high-temperature applications. A complete assembly requires two hubs and one jaw coupling spider, available separately.
Automotive
Spicer 5-3616X 1410 Series U-Joint Kit
COATED for ALUMINUM DRIVESHAFTS Dana Spicer 5-3616X is a solid body 1410 series universal joint with 4 zinc phosphate coated bearing caps specifically designed for aluminum driveshafts to eliminate corrosion caused by electrolysis. Fits light truck aluminum driveshaft applications that require a 1410 coated u-joint.Automotive
Spicer 5-2173X Universal Joint
5-2173X Universal Joint
Description
Universal Joint; Greaseable
Automotive
Spicer 5-1503X U-Joint Kit
- Package Dimensions: 8.89 L x 9.144 W x 3.555 H (centimetres)
- Chevrolet Tracker 2004-99; Dodge Challenger 1983-81, Colt 1990-71, D-Series Truck 1982-80, Power Ram 50 1986-83, Raider 1989-87, Ram 50 1993-83
- Package Weight: 0.6 pounds
- Country of Origin : United States
Couplings
Boston Gear FC20-9/16 Jaw coupling hub
- Size - Jaw Couplings: FC20
- Keyway Size Type: 1/8 in x 1/16 in
- Material - Hubs: Steel
- Outside Dia.: 2 in
- Assembled Coupling Length: 3.69 in
- Keyway Size: 1/8" x 1/16"
- Overall Length: 3.69 in
Agricultural & Construction Machinery
Spicer SPL55X U-Joint Kit 1480-SPL55 Series OSR
Greaseable N Type OSR Style Invoice U-Joint Kit OEM Mfg Spicer OEM Series 1480/SPL55 Bearing Cap Diameter (1) 1.375 Bearing Cap Diameter (2) 1.375 SR(1)Brng Cap to Brng Cap(OSR) 4.188 SR(2)Brng Cap to Brng Cap(OSR) 4.188 VMRS 024002046 Bearing Cap Type Round Snap Ring Type External Snap Ring Included Y Material Steel Hardware Included N Length A (In) 4.188 Length B (In) 4.188 Length A (mm) 106.4 Length B (mm) 106.4 Bearing Cap Type A OSR Bearing Cap Type B OSR Bearing Cap Diameter A (mm) 34.9 Bearing Cap Diameter B (mm) 34.9
Boston Gear XFCA30 Polyurethane Shaft Coupling Insert
Boston Gear Polyurethane Spider insert - Boston Gear FC30 and SSFC30
- Size - Jaw Couplings: FC30
- Material - Spiders: Polyurethane
- Rated Torque: 1,500 in-lb
- Max. RPM: 3,600 RPM
- HP Rating @ 100 RPM: 2.20
- Temp. Range: -32 Degrees to 200 Degrees F
- Serviceable Temp. Range (F): -32 to 200
Automotive
Spicer 5-188X U-Joint Kit 1480 Series OSR
- Spicer greaseable universal joint with snap rings
- Outside Snap Ring Style (OSR)
- 1480 Series
- Bearing Cap Diameter: 1.375 inches
- Bearing Cap to Bearing Cap: 4.188 inches
- Spicer genuine OE replacement
- Outside snap rings
- Outside to outside dimension: 4.188 inch
- Bearing cup size: 1.375 inch
- 3-0188, CP188X, 351
Boston Gear XFCA45 Polyurethane Spider Insert
Boston Gear Polyurethane spider insert Boston Gear FC45 and SSFC45- Size - Jaw Couplings: FC45
- Material - Spiders: Polyurethane
- Rated Torque: 5,250 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 7.50
- Temp. Range: -32 Degrees to 200 Degrees F
- HP Rating @ 300 RPM: 22.4
Automotive
Spicer 5-101X 1100 Series U-Joint Kit
5-101X Universal Joint
Description
Universal Joint Non-Greaseable 1100 Series
Spicer SPL55-1X U-Joint Kit 1480-SPL55 Series
The following parts may be used as alternates for this part:
Dana/Spicer 5-188X
Rockwell/Meritor CP188X
Borg Warner 114-588
Neapco 3-0188
Chrysler 1752307
Ford C1TT4724A
Ford C1TZ4635A
Ford F81Z4635CA
Ford F81Z4635CB
General Motors 100315
General Motors 2057289
General Motors 2341648
General Motors 2345726
General Motors 3737508
General Motors 3737589
General Motors 6268535
General Motors 15515792
General Motors 88934794
Precision 351
Spicer 5-1310X U-Joint Kit 1310-SPL22 Series OSR
- Spicer Life non-greaseable universal joint with snap rings
- Outside Snap Ring Style (OSR)
- 1310/SPL22 Series
- Bearing Cap Diameter: 1.062 inches
- Bearing Cap to Bearing Cap: 3.219 inches
Couplings
BOSTON GEAR SSFC12 Jaw Coupling Hub
- Size - Jaw Couplings: SSFC12
- Keyway Size Type: 1/8 in x 1/16 in
- Material - Hubs: Stainless Steel
- Outside Dia.: 1.25 in
- Assembled Coupling Length: 2.31 in
- Overall Length: 2.31 in
- Size: SSFC12
Couplings
Spicer 5-3614X 1330 Series U-Joint Kit
Greaseable N Type OSR Style Invoice U-Joint Kit OEM Mfg Spicer OEM Series 1330 Bearing Cap Diameter (1) 1.062 Bearing Cap Diameter (2) 1.062 SR(1)Brng Cap to Brng Cap(OSR) 3.625 SR(2)Brng Cap to Brng Cap(OSR) 3.625 VMRS 024002046 Bearing Cap Type Round Snap Ring Type External Snap Ring Included Y Material Steel Bearing Cap Finish Coated Caps for Aluminum Driveshafts Hardware Included N Length A (In) 3.625 Length B (In) 3.625 Length A (mm) 92.075 Length B (mm) 92.075 Bearing Cap Type A OSR Bearing Cap Type B OSR Bearing Cap Diameter A (mm) 27 Bearing Cap Diameter B (mm) 27Automotive
Spicer 5-1350X U-Joint Kit 1350/SPL30 Series
5-1350X Universal Joint
Description
Universal Joint; Non-Greaseable
Spicer 5-3206X U-Joint Kit AAM 1485 Series OSR
1485 series AAM Universal Joints for CHEVY, GMC and DODGE 2WD light trucks and 4x4 trucks.
- 1485 series AAM Fits driveshafts made by American Axle ONLY.
- 4.181 inches wide in both directions across bearing caps
- All 4 bearing caps are 1.375 inch (1 3/8) diameter
- Designed for Outside snap ring style driveshaft yokes and also Locating Tab style pinion yokes, transmission yokes and transfer case yokes
- Commonly used in CHEVY, GMC and Dodge light truck and diesel 4x4 driveshafts as well as many other vehicles.
IMPORTANT... The 1485 series AAM universal joint is just .007 NARROWER than the Spicer 1480 series.
Boston Gear SSFC20 SOLID Jaw Coupling Hub
Key Features
- Item - Jaw Coupling Hubs: Jaw Coupling Hub
- Size - Jaw Couplings: SSFC20
- Keyway Size Type: None
- Material - Hubs: Stainless Steel
- Outside Dia.: 2 in
- Assembled Coupling Length: 3.69 in
- Material: Stainless Steel
- Overall Length: 3.69 in
Boston Gear SSFC20 3/4" SS Jaw Coupling Hub
Bore Dia. 3/4 in Keyway Size Type 3/16 in x 3/32 in Outside Dia. 2 in Assembled Coupling Length 3.69 in Keyway Size 3/16" x 3/32" Overall Length 3.69 in UPC Number 884107384221Beam
Reviews
There are no reviews yet.