Huco MULTI-BEAM 703.51
Huco MULTI-BEAM 703.51
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
SKU: B078YBWMG9
Categories: Beam, Couplings, Couplings, Collars & Universal Joiners
Tags: beam coupling, tb Woods
Description
Coupling Type
MultiBeam Coupling
Size
51
Material
Stainless Steel
Max Bore B1 (mm)
26
Min Bore B1 (mm)
10
Max Bore B2 (mm)
26
Min Bore B2 (mm)
16
Angular Compensation, Max (degrees)
7
Bore Tolerance (mm)
+0.03 / -0.00
Fastener Screw Size
M6
Fastener Screw Torque (Nm)
9.75
Fastener Wrench Size (mm)
5
Max Speed (rpm)
5000
Operating Temperature (°C)
-40 to +140
Peak Torque (Nm)
73
Radial Compensation, Max (mm)
0.9
Resists Axial Load
Yes
Shaft Connection
Clamp
Torsional Stiffness (Nm/rad)
1305
Mass (Weight) (kgs)
1.116
[D] Outside Diameter (mm)
50.8
L1 Dimension (mm)
25
[L] Length (mm)
95.3
[L] Overall Length (mm)
95.3
Item Note
Coupling load capacity depends on the operating load cycle. Refer to catalog for further sizing information.
Additional information
Asin | B078YBWMG9 |
---|
Reviews (0)
Be the first to review “Huco MULTI-BEAM 703.51” Cancel reply
Related products
Couplings
Boston Gear FC20-1/2 Jaw coupling hub
RPM [MAX] | 1800 rpm |
LENGTH THROUGH BORE | 1.57 in |
OUTSIDE DIA. | 2 in |
KEYWAY SIZE | 1/8 x 1/16 |
LOCK TYPE | Setscrew |
COUPLING SIZE | FC20 |
MATERIAL | Steel |
HUB DIA. | 1 3/4 in |
WEIGHT | 1.181 LB |
EAN OR UPC | 781711082584 |
Couplings
BOSTON GEAR FC-15-1/2 SHAFT COUPLING
Boston Gear FC15 1/2
Steel FC Coupling, Size 15, 1/2 in. Bore
MFR #FC15 1/2
Couplings
Boston Gear XFCA12 Poly Insert
Boston Gear Polyurethane Spider Insert for Boston Gear FC12 and SSFC12Key Features
- Size - Jaw Couplings FC12
- Material - Spiders Synthetic Rubber
- Rated Torque 125 in-lb
- Max. RPM 3,600 RPM
- HP Rating @ 100 RPM 0.19
Boston Gear XFCA15 Polyurethane Shaft Coupling Insert
Boston Gear Polyurethane Spider Insert for Boston Gear FC15 and SSFC15
BOSTON GEAR Polyurethane Spider Insert: FC15, 250 in-lb Rated Torque, 3,600 RPM Max., -32° to 200°F
Automotive
Spicer 5-789X U-Joint Kit 7260 Series
- Spicer Life non-greaseable axle shaft universal joint with snap rings
- Inside Snap Ring Style (ISR)
- 1310WJ Series
- Bearing Cap Diameter: 1.188 inches
- Length Between Snap Rings: 2.188 inches
Couplings
Boston Gear FC20-3/4 Shaft Coupler hub
Size - Jaw Couplings FC20
Bore Dia. 3/4 in
Keyway Size Type 3/16 in x 3/32 in
Material - Hubs Steel
Outside Dia. 2 in
Assembled Coupling Length 3.69 in
Overall Length 3.69 in
UNSPSC 31163003
- Product Description
- Steel Jaw Coupling Hubs connect to drive shafts to provide dependable power transfer in high-temperature applications. A complete assembly requires two hubs and one jaw coupling spider, available separately.
Boston Gear XFCR30 Rubber Coupling Insert
Boston Gear Rubber spider insert for Boston Gear FC30 and SSFC30- Size - Jaw Couplings: FC30
- Material - Spiders: Synthetic Rubber
- Rated Torque: 800 in-lb
- Max. RPM: 3,600 RPM
- HP Rating @ 100 RPM: 1.30
- Temp. Range: -32 Degrees to 200 Degrees F
- Max. Torque (In.-Lbs.): 800
Boston Gear XFCBB30 BOST-BRONZ Shaft Coupling Insert
Boston Gear Bost-Bronz spider insert for Boston Gear FC30 and SSFC30
MFR # BRONZE INSERTS 08072
BOSTON GEAR Oil Impregnated Spider Insert: FC30, 3,200 in-lb Rated Torque, 690 RPM Max., Bronze
Spicer 5-1310-1X U-Joint Kit 1310/SPL22 Series
5-1310-1X Universal Joint
Description
Universal Joint; Greaseable
Beam
Huco 723.51.4848
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Beam
Huco 723.51.4747
Six Beam Coupling, Clamp, Relieved, 51mm OD, 3/4in. x 3/4in. Bores
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Boston Gear XFCR45 Rubber Shaft Coupling Insert
Boston Gear Rubber Spider Insert for Boston Gear FC45 and SSFC45- Size - Jaw Couplings: FC45
- Material - Spiders: Synthetic Rubber
- Rated Torque: 2,800 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 4.40
- Temp. Range: -32 Degrees to 200 Degrees F
- Coupling Size: FC45
-
XFCR45 RUBBER INSERT 08090
Boston Gear XFCA45 Polyurethane Spider Insert
Boston Gear Polyurethane spider insert Boston Gear FC45 and SSFC45- Size - Jaw Couplings: FC45
- Material - Spiders: Polyurethane
- Rated Torque: 5,250 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 7.50
- Temp. Range: -32 Degrees to 200 Degrees F
- HP Rating @ 300 RPM: 22.4
Couplings
Boston Gear FC45 2in Steel FC Coupling
PRODUCT DETAILS
- Size FC45 Coupling Hub
- 2" Bore
FEATURES
- No lubricant required
- Complete with keyway and setscrew
- Precision machined
MFR # FC45 2 HALF HUB 08310
Boston Gear XFCA38 Polyurethane Shaft Coupling Insert
Boston Gear Polyurethane Spider Insert for Boston Gear FC38 and SSFC38- Size - Jaw Couplings: FC38
- Material - Spiders: Polyurethane
- Rated Torque: 3,000 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 4.30
- Temp. Range: -32 Degrees to 200 Degrees F
- HP Rating @ 1150 RPM: 45.8 hp
Couplings
BOSTON GEAR SSFC12 Jaw Coupling Hub
- Size - Jaw Couplings: SSFC12
- Keyway Size Type: 1/8 in x 1/16 in
- Material - Hubs: Stainless Steel
- Outside Dia.: 1.25 in
- Assembled Coupling Length: 2.31 in
- Overall Length: 2.31 in
- Size: SSFC12
Boston Gear XFCA20 Polyurethane Spider Insert
MFR DESCRIPTION XFCA20 NON METAL INSERTS 08054
- Oil-Resistant Synthetic Rubber is recommended where quietness is desired, particularly at motor speeds
- Polyurethane is recommended where moderate to heavy shock loads are encountered
- Oil-Impregnated Bost-Bronze is recommended for high torque loads, particularly at slower speeds
Automotive
Spicer 5-101X 1100 Series U-Joint Kit
5-101X Universal Joint
Description
Universal Joint Non-Greaseable 1100 Series
Couplings
Boston Gear FC20-9/16 Jaw coupling hub
- Size - Jaw Couplings: FC20
- Keyway Size Type: 1/8 in x 1/16 in
- Material - Hubs: Steel
- Outside Dia.: 2 in
- Assembled Coupling Length: 3.69 in
- Keyway Size: 1/8" x 1/16"
- Overall Length: 3.69 in
Couplings
Boston Gear FC20-7/8 Jaw coupling hub
Series | : | FC Series |
Coupling Size | : | FC20 |
Bore Diameter | : | 7/8 in |
Hub Diameter | : | 1-3/4 in |
Hub Length | : | 1-1/8 in |
Keyway Size | : | 3/16 x 3/32 in |
Maximum Speed | : | 1750 rpm |
Length Through Bore | : | 1-4/16 in |
Screw Size | : | 5/16-18 |
Material | : | Steel |
Boston Gear SSFC20-1 Jaw Coupling Hub 1/4 in x 1/8 in KW
SSFC Series Insert (3 Jaw) Type Couplings are made of 316 Stainless Steel and are available with precision machined bored or solid hubs. The SSFC Series coupling offers three types of inserts for different service requirements.
Boston Gear SSFC20 SOLID Jaw Coupling Hub
Key Features
- Item - Jaw Coupling Hubs: Jaw Coupling Hub
- Size - Jaw Couplings: SSFC20
- Keyway Size Type: None
- Material - Hubs: Stainless Steel
- Outside Dia.: 2 in
- Assembled Coupling Length: 3.69 in
- Material: Stainless Steel
- Overall Length: 3.69 in
Boston Gear SSFC20 3/4" SS Jaw Coupling Hub
Bore Dia. 3/4 in Keyway Size Type 3/16 in x 3/32 in Outside Dia. 2 in Assembled Coupling Length 3.69 in Keyway Size 3/16" x 3/32" Overall Length 3.69 in UPC Number 884107384221
Reviews
There are no reviews yet.