Huco MULTI-BEAM 703.51
Huco MULTI-BEAM 703.51
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
SKU: B078YBWMG9
Categories: Beam, Couplings, Couplings, Collars & Universal Joiners
Tags: beam coupling, tb Woods
Description
Coupling Type
MultiBeam Coupling
Size
51
Material
Stainless Steel
Max Bore B1 (mm)
26
Min Bore B1 (mm)
10
Max Bore B2 (mm)
26
Min Bore B2 (mm)
16
Angular Compensation, Max (degrees)
7
Bore Tolerance (mm)
+0.03 / -0.00
Fastener Screw Size
M6
Fastener Screw Torque (Nm)
9.75
Fastener Wrench Size (mm)
5
Max Speed (rpm)
5000
Operating Temperature (°C)
-40 to +140
Peak Torque (Nm)
73
Radial Compensation, Max (mm)
0.9
Resists Axial Load
Yes
Shaft Connection
Clamp
Torsional Stiffness (Nm/rad)
1305
Mass (Weight) (kgs)
1.116
[D] Outside Diameter (mm)
50.8
L1 Dimension (mm)
25
[L] Length (mm)
95.3
[L] Overall Length (mm)
95.3
Item Note
Coupling load capacity depends on the operating load cycle. Refer to catalog for further sizing information.
Additional information
Asin | B078YBWMG9 |
---|
Reviews (0)
Be the first to review “Huco MULTI-BEAM 703.51” Cancel reply
Related products
Boston Gear XFCBB20 Bost-Bronz Coupling Insert
OVERVIEW
MFR DESCRIPTION
XFCBB20 BRONZE INSERTS 08068
- Oil-Resistant Synthetic Rubber is recommended where quietness is desired, particularly at motor speeds
- Polyurethane is recommended where moderate to heavy shock loads are encountered
- Oil-Impregnated Bost-Bronze is recommended for high torque loads, particularly at slower speeds
Couplings
BOSTON GEAR SSFC12 Jaw Coupling Hub
- Size - Jaw Couplings: SSFC12
- Keyway Size Type: 1/8 in x 1/16 in
- Material - Hubs: Stainless Steel
- Outside Dia.: 1.25 in
- Assembled Coupling Length: 2.31 in
- Overall Length: 2.31 in
- Size: SSFC12
Boston Gear XFCBB15 Bost-Bronz Coupling Insert
Boston Gear Bost-Bronz spider insert for Boston Gear FC15 and SSFC15 Mfr # XFCBB15 BRONZE INSERTS 08066
Boston Gear XFCBB45 BOST-BRONZ Shaft Coupling Insert
Boston Gear Bost-Bronz spider insert for Boston Gear FC45 and SSFC45
Mfr # XFCBB45 BRONZE INSERTS 08076
Boston Gear XFCA30 Polyurethane Shaft Coupling Insert
Boston Gear Polyurethane Spider insert - Boston Gear FC30 and SSFC30
- Size - Jaw Couplings: FC30
- Material - Spiders: Polyurethane
- Rated Torque: 1,500 in-lb
- Max. RPM: 3,600 RPM
- HP Rating @ 100 RPM: 2.20
- Temp. Range: -32 Degrees to 200 Degrees F
- Serviceable Temp. Range (F): -32 to 200
Boston Gear XFCR25 Rubber Coupling Insert
Boston Gear Rubber spider insert for Boston Gear FC25 and SSFC25
BOSTON GEAR Oil Resistant Spider Insert: FC25, 450 in-lb Rated Torque, 3,600 RPM Max., -32° to 200°F
Mfr. Model XFCR25
Boston Gear SSFC20-1 Jaw Coupling Hub 1/4 in x 1/8 in KW
SSFC Series Insert (3 Jaw) Type Couplings are made of 316 Stainless Steel and are available with precision machined bored or solid hubs. The SSFC Series coupling offers three types of inserts for different service requirements.Couplings
Boston Gear XFCR12 Rubber Spider Insert
Boston Gear Rubber spider insert for Boston Gear FC12 and SSFC12
- Size - Jaw Couplings: FC12
- Material - Spiders: Synthetic Rubber
- Rated Torque: 65 in-lb
- Max. RPM: 3,600 RPM
- HP Rating @ 100 RPM: 0.10
- Temp. Range: -32 Degrees to 200 Degrees F
- Type: Oil Resistant
Beam
TB Woods 703.51.4753
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Spicer 5-1310-1X U-Joint Kit 1310/SPL22 Series
5-1310-1X Universal Joint
Description
Universal Joint; Greaseable
TB Woods MULTI-BEAM 51 - 703.51.5050
Typical Applications
• Stepper and servo drives • Encoders • General purpose light-duty power transmission
General Specifications • Temperature range: -40 to +140 Degrees C. • Standard speed rating: 5,000 rpm maximum. • Standard fasteners are 100% metric.
Materials & Finishes
• Couplings: Stainless Steel 303 S31 • Fasteners: Stainless Steel
Boston Gear SSFC20 3/4" SS Jaw Coupling Hub
Bore Dia. 3/4 in Keyway Size Type 3/16 in x 3/32 in Outside Dia. 2 in Assembled Coupling Length 3.69 in Keyway Size 3/16" x 3/32" Overall Length 3.69 in UPC Number 884107384221
Boston Gear XFCA25 Polyurethane Shaft Coupling Insert
- Size - Jaw Couplings: FC25
- Material - Spiders: Polyurethane
- Rated Torque: 845 in-lb
- Max. RPM: 3,600 RPM
- HP Rating @ 100 RPM: 1.20
- Temp. Range: -32 Degrees to 200 Degrees F
- HP Rating @ 1750 RPM: 19.3 hp
Beam
Huco 723.51.4848
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Boston Gear XFCA38 Polyurethane Shaft Coupling Insert
Boston Gear Polyurethane Spider Insert for Boston Gear FC38 and SSFC38- Size - Jaw Couplings: FC38
- Material - Spiders: Polyurethane
- Rated Torque: 3,000 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 4.30
- Temp. Range: -32 Degrees to 200 Degrees F
- HP Rating @ 1150 RPM: 45.8 hp
Boston Gear XFCA15 Polyurethane Shaft Coupling Insert
Boston Gear Polyurethane Spider Insert for Boston Gear FC15 and SSFC15
BOSTON GEAR Polyurethane Spider Insert: FC15, 250 in-lb Rated Torque, 3,600 RPM Max., -32° to 200°F
Boston Gear XFCR30 Rubber Coupling Insert
Boston Gear Rubber spider insert for Boston Gear FC30 and SSFC30- Size - Jaw Couplings: FC30
- Material - Spiders: Synthetic Rubber
- Rated Torque: 800 in-lb
- Max. RPM: 3,600 RPM
- HP Rating @ 100 RPM: 1.30
- Temp. Range: -32 Degrees to 200 Degrees F
- Max. Torque (In.-Lbs.): 800
Boston Gear XFCBB12 BOST-BRONZ Shaft Coupling Insert
Boston Gear Bost-Bronz spider insert for Boston Gear FC12 and SSFC12
PRODUCT DETAILS
- Size FC12 Coupling Insert
- Bronze
FEATURES
- Recommended for high torque loads, particularly at slower speeds
- Mfr # 08064
Boston Gear XFCR20 Rubber Coupling Insert
Boston Gear Rubber Spider insert for Boston Gear FC20 and SSFC20
MFR DESCRIPTION
XFCR20 RUBBER INSERT 08082
- Oil-Resistant Synthetic Rubber is recommended where quietness is desired, particularly at motor speeds
- Polyurethane is recommended where moderate to heavy shock loads are encountered
- Oil-Impregnated Bost-Bronze is recommended for high torque loads, particularly at slower speeds
Boston Gear SSFC20-5/8 SS Jaw coupling hub
- Size - Jaw Couplings: SSFC20
- Keyway Size Type: 3/16 in x 3/32 in
- Material - Hubs: Stainless Steel
- Outside Dia.: 2 in
- Assembled Coupling Length: 3.69 in
- Overall Length: 3.69 in
- UPC 884107384214
Boston Gear XFCBB38 Bost-Bronz Coupling Insert
Boston Gear Bost-Bronz spider insert for Boston Gear FC38 and SSFC38
MFR # XFCBB38 BRONZE INSERTS 08074
Couplings
Boston Gear FC20-3/4 Shaft Coupler hub
Size - Jaw Couplings FC20
Bore Dia. 3/4 in
Keyway Size Type 3/16 in x 3/32 in
Material - Hubs Steel
Outside Dia. 2 in
Assembled Coupling Length 3.69 in
Overall Length 3.69 in
UNSPSC 31163003
- Product Description
- Steel Jaw Coupling Hubs connect to drive shafts to provide dependable power transfer in high-temperature applications. A complete assembly requires two hubs and one jaw coupling spider, available separately.
Automotive
Spicer 5-153X U-Joint Kit 1310 Series
Spicer greaseable universal joint with snap rings
- Outside Snap Ring Style (OSR)
- 1310 Series
- Bearing Cap Diameter: 1.062 inches
- Bearing Cap to Bearing Cap: 3.219 inches
Couplings
Boston Gear XFCA12 Poly Insert
Boston Gear Polyurethane Spider Insert for Boston Gear FC12 and SSFC12Key Features
- Size - Jaw Couplings FC12
- Material - Spiders Synthetic Rubber
- Rated Torque 125 in-lb
- Max. RPM 3,600 RPM
- HP Rating @ 100 RPM 0.19
Reviews
There are no reviews yet.