Huco MULTI-BEAM 703.51
Huco MULTI-BEAM 703.51
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
SKU: B078YBWMG9
Categories: Beam, Couplings, Couplings, Collars & Universal Joiners
Tags: beam coupling, tb Woods
Description
Coupling Type
MultiBeam Coupling
Size
51
Material
Stainless Steel
Max Bore B1 (mm)
26
Min Bore B1 (mm)
10
Max Bore B2 (mm)
26
Min Bore B2 (mm)
16
Angular Compensation, Max (degrees)
7
Bore Tolerance (mm)
+0.03 / -0.00
Fastener Screw Size
M6
Fastener Screw Torque (Nm)
9.75
Fastener Wrench Size (mm)
5
Max Speed (rpm)
5000
Operating Temperature (°C)
-40 to +140
Peak Torque (Nm)
73
Radial Compensation, Max (mm)
0.9
Resists Axial Load
Yes
Shaft Connection
Clamp
Torsional Stiffness (Nm/rad)
1305
Mass (Weight) (kgs)
1.116
[D] Outside Diameter (mm)
50.8
L1 Dimension (mm)
25
[L] Length (mm)
95.3
[L] Overall Length (mm)
95.3
Item Note
Coupling load capacity depends on the operating load cycle. Refer to catalog for further sizing information.
Additional information
Asin | B078YBWMG9 |
---|
Reviews (0)
Be the first to review “Huco MULTI-BEAM 703.51” Cancel reply
Related products
Couplings
BOSTON GEAR SSFC12 Jaw Coupling Hub
- Size - Jaw Couplings: SSFC12
- Keyway Size Type: 1/8 in x 1/16 in
- Material - Hubs: Stainless Steel
- Outside Dia.: 1.25 in
- Assembled Coupling Length: 2.31 in
- Overall Length: 2.31 in
- Size: SSFC12
Boston Gear XFCR45 Rubber Shaft Coupling Insert
Boston Gear Rubber Spider Insert for Boston Gear FC45 and SSFC45- Size - Jaw Couplings: FC45
- Material - Spiders: Synthetic Rubber
- Rated Torque: 2,800 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 4.40
- Temp. Range: -32 Degrees to 200 Degrees F
- Coupling Size: FC45
-
XFCR45 RUBBER INSERT 08090
Boston Gear SSFC20 3/4" SS Jaw Coupling Hub
Bore Dia. 3/4 in Keyway Size Type 3/16 in x 3/32 in Outside Dia. 2 in Assembled Coupling Length 3.69 in Keyway Size 3/16" x 3/32" Overall Length 3.69 in UPC Number 884107384221Automotive
Spicer 5-105X Greaseable Universal Joint
5-105X Universal Joint
Description
Universal Joint Greaseable 1110 Series
Boston Gear XFCR38 Rubber Coupling Insert
Boston Gear Rubber Spider Insert for Boston Gear FC38 and SSFC38
- Size - Jaw Couplings: FC38
- Material - Spiders: Synthetic Rubber
- Rated Torque: 1,600 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 2.50
- Temp. Range: -32 Degrees to 200 Degrees F
- Item: Oil Resistant Spider Insert
TB Woods MULTI-BEAM 51 - 703.51.5050
Typical Applications
• Stepper and servo drives • Encoders • General purpose light-duty power transmission
General Specifications • Temperature range: -40 to +140 Degrees C. • Standard speed rating: 5,000 rpm maximum. • Standard fasteners are 100% metric.
Materials & Finishes
• Couplings: Stainless Steel 303 S31 • Fasteners: Stainless Steel
Boston Gear XFCA15 Polyurethane Shaft Coupling Insert
Boston Gear Polyurethane Spider Insert for Boston Gear FC15 and SSFC15
BOSTON GEAR Polyurethane Spider Insert: FC15, 250 in-lb Rated Torque, 3,600 RPM Max., -32° to 200°F
Boston Gear XFCBB45 BOST-BRONZ Shaft Coupling Insert
Boston Gear Bost-Bronz spider insert for Boston Gear FC45 and SSFC45
Mfr # XFCBB45 BRONZE INSERTS 08076
Boston Gear XFCR20 Rubber Coupling Insert
Boston Gear Rubber Spider insert for Boston Gear FC20 and SSFC20
MFR DESCRIPTION
XFCR20 RUBBER INSERT 08082
- Oil-Resistant Synthetic Rubber is recommended where quietness is desired, particularly at motor speeds
- Polyurethane is recommended where moderate to heavy shock loads are encountered
- Oil-Impregnated Bost-Bronze is recommended for high torque loads, particularly at slower speeds
Couplings
Boston Gear FC45 2in Steel FC Coupling
PRODUCT DETAILS
- Size FC45 Coupling Hub
- 2" Bore
FEATURES
- No lubricant required
- Complete with keyway and setscrew
- Precision machined
MFR # FC45 2 HALF HUB 08310
Boston Gear XFCBB38 Bost-Bronz Coupling Insert
Boston Gear Bost-Bronz spider insert for Boston Gear FC38 and SSFC38
MFR # XFCBB38 BRONZE INSERTS 08074
Couplings
Boston Gear FC20-7/8 Jaw coupling hub
Series | : | FC Series |
Coupling Size | : | FC20 |
Bore Diameter | : | 7/8 in |
Hub Diameter | : | 1-3/4 in |
Hub Length | : | 1-1/8 in |
Keyway Size | : | 3/16 x 3/32 in |
Maximum Speed | : | 1750 rpm |
Length Through Bore | : | 1-4/16 in |
Screw Size | : | 5/16-18 |
Material | : | Steel |
Boston Gear SSFC20-5/8 SS Jaw coupling hub
- Size - Jaw Couplings: SSFC20
- Keyway Size Type: 3/16 in x 3/32 in
- Material - Hubs: Stainless Steel
- Outside Dia.: 2 in
- Assembled Coupling Length: 3.69 in
- Overall Length: 3.69 in
- UPC 884107384214
Beam
TB Woods 703.51.4753
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Boston Gear XFCA38 Polyurethane Shaft Coupling Insert
Boston Gear Polyurethane Spider Insert for Boston Gear FC38 and SSFC38- Size - Jaw Couplings: FC38
- Material - Spiders: Polyurethane
- Rated Torque: 3,000 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 4.30
- Temp. Range: -32 Degrees to 200 Degrees F
- HP Rating @ 1150 RPM: 45.8 hp
Couplings
Boston Gear XFCA12 Poly Insert
Boston Gear Polyurethane Spider Insert for Boston Gear FC12 and SSFC12Key Features
- Size - Jaw Couplings FC12
- Material - Spiders Synthetic Rubber
- Rated Torque 125 in-lb
- Max. RPM 3,600 RPM
- HP Rating @ 100 RPM 0.19
Boston Gear XFCBB20 Bost-Bronz Coupling Insert
OVERVIEW
MFR DESCRIPTION
XFCBB20 BRONZE INSERTS 08068
- Oil-Resistant Synthetic Rubber is recommended where quietness is desired, particularly at motor speeds
- Polyurethane is recommended where moderate to heavy shock loads are encountered
- Oil-Impregnated Bost-Bronze is recommended for high torque loads, particularly at slower speeds
Boston Gear XFCA45 Polyurethane Spider Insert
Boston Gear Polyurethane spider insert Boston Gear FC45 and SSFC45- Size - Jaw Couplings: FC45
- Material - Spiders: Polyurethane
- Rated Torque: 5,250 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 7.50
- Temp. Range: -32 Degrees to 200 Degrees F
- HP Rating @ 300 RPM: 22.4
Boston Gear SSFC20-1 Jaw Coupling Hub 1/4 in x 1/8 in KW
SSFC Series Insert (3 Jaw) Type Couplings are made of 316 Stainless Steel and are available with precision machined bored or solid hubs. The SSFC Series coupling offers three types of inserts for different service requirements.Automotive
Spicer 5-2173X Universal Joint
5-2173X Universal Joint
Description
Universal Joint; Greaseable
Beam
TB Woods 703.51.4145
TB Woods MULTI-BEAM 51 5/8 --18MM (703.51.4145)
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Spicer 5-1310-1X U-Joint Kit 1310/SPL22 Series
5-1310-1X Universal Joint
Description
Universal Joint; Greaseable
Automotive
Spicer 5-101X 1100 Series U-Joint Kit
5-101X Universal Joint
Description
Universal Joint Non-Greaseable 1100 Series
Boston Gear XFCBB12 BOST-BRONZ Shaft Coupling Insert
Boston Gear Bost-Bronz spider insert for Boston Gear FC12 and SSFC12
PRODUCT DETAILS
- Size FC12 Coupling Insert
- Bronze
FEATURES
- Recommended for high torque loads, particularly at slower speeds
- Mfr # 08064
Reviews
There are no reviews yet.