Huco 723.51.4848
Huco 723.51.4848
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
SKU: B078YCBYXQ
Categories: Beam, Couplings, Collars & Universal Joiners, Flexible Couplings
Tags: beam coupling, Huco
Description
Coupling Type MultiBeam Coupling
Configuration 6 Beam Relieved Bore
Size 51
Material Stainless Steel
Max Bore B1 (mm) 26
Min Bore B1 (mm) 10
Max Bore B2 (mm) 26
Min Bore B2 (mm) 16
Angular Compensation, Max (degrees) 7
Bore Tolerance (mm) +0.03 / -0.00
Fastener Screw Size M6
Fastener Screw Torque (Nm) 9.75
Fastener Wrench Size (mm) 5
Max Speed (rpm) 5000
Operating Temperature (°C) -40 to +140
Peak Torque (Nm) 37
Radial Compensation, Max (mm) 0.9
Resists Axial Load Yes
Shaft Connection Clamp
Torsional Stiffness (Nm/rad) 783
Mass (Weight) (g) 996
[D] Outside Diameter (mm) 50.8
L1 Dimension (mm) 25
[L] Length (mm) 95.3
[L] Overall Length (mm) 95.3
Item Note
Coupling load capacity depends on the operating load cycle. Refer to catalog for further sizing information.
Additional information
Asin | B078YCBYXQ |
---|
Reviews (0)
Be the first to review “Huco 723.51.4848” Cancel reply
Related products
Spicer 5-3206X U-Joint Kit AAM 1485 Series OSR
1485 series AAM Universal Joints for CHEVY, GMC and DODGE 2WD light trucks and 4x4 trucks.
- 1485 series AAM Fits driveshafts made by American Axle ONLY.
- 4.181 inches wide in both directions across bearing caps
- All 4 bearing caps are 1.375 inch (1 3/8) diameter
- Designed for Outside snap ring style driveshaft yokes and also Locating Tab style pinion yokes, transmission yokes and transfer case yokes
- Commonly used in CHEVY, GMC and Dodge light truck and diesel 4x4 driveshafts as well as many other vehicles.
IMPORTANT... The 1485 series AAM universal joint is just .007 NARROWER than the Spicer 1480 series.
Automotive
Spicer 5-2173X Universal Joint
5-2173X Universal Joint
Description
Universal Joint; Greaseable
Automotive
Spicer 5-105X Greaseable Universal Joint
5-105X Universal Joint
Description
Universal Joint Greaseable 1110 Series
Automotive
Spicer 5-3616X 1410 Series U-Joint Kit
COATED for ALUMINUM DRIVESHAFTS Dana Spicer 5-3616X is a solid body 1410 series universal joint with 4 zinc phosphate coated bearing caps specifically designed for aluminum driveshafts to eliminate corrosion caused by electrolysis. Fits light truck aluminum driveshaft applications that require a 1410 coated u-joint.Couplings
BOSTON GEAR FC-15-1/2 SHAFT COUPLING
Boston Gear FC15 1/2
Steel FC Coupling, Size 15, 1/2 in. Bore
MFR #FC15 1/2
Automotive
Spicer 5004989 U-Joint Kit
Spicer 5-7437X U-Joint Kit 7290-1330 SPL25 Series
- Spicer Life non-greaseable universal joint with snap rings
- Inside and Outside Snap Ring Style
- Bearing Cap Diameter (OSR): 1.062 inches / Bearing Cap Diameter (ISR): 1.125 inches
- Bearing Cap to Bearing Cap (OSR): 3.625 inches / Length Between Snap Rings (ISR): 2.625 inches
- Spicer genuine OE replacement
- Inside and outside snap rings
- Outside to outside dimension: 3.625 inch; outside bearing cup dimension: 1.062 inch
- Inside to inside dimension: 2.625 inch; inside bearing cup dimension: 1.125 inch
- 2-0355, 458
- These Universal Joints Fit Dodge Trucks as follows:1992-1999 DODGE Dakota1994-1999 DODGE RAM 1500 1999 DODGE RAM 1500 Van 1998-1999 DODGE RAM 2500 1998-1999 DODGE RAM 2500 Van 1997-1999 DODGE RAM 3500 1999 DODGE RAM 3500 Van 1998 DODGE B1500 1998 DODGE B2500 1999 DODGE Durango
Boston Gear XFCR45 Rubber Shaft Coupling Insert
Boston Gear Rubber Spider Insert for Boston Gear FC45 and SSFC45- Size - Jaw Couplings: FC45
- Material - Spiders: Synthetic Rubber
- Rated Torque: 2,800 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 4.40
- Temp. Range: -32 Degrees to 200 Degrees F
- Coupling Size: FC45
-
XFCR45 RUBBER INSERT 08090
Couplings
Spicer 5-2031X Universal Joint
- Ford Custom 1957-49, Custom 300 1959-57, Customline 1956-52, Galaxia 1959; Mercury Monterey 1954-50; Oldsmobile 88 1950, 98 1952-50; Pontiac Catalina 1955-50
- The package length is 10.16 inches
- The package height is 10.16 inches
- The package width is 3.65 inches
Beam
Huco 723.51.4747
Six Beam Coupling, Clamp, Relieved, 51mm OD, 3/4in. x 3/4in. Bores
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Agricultural & Construction Machinery
Spicer 5-793X U-Joint Kit 1330 S44 Series OSR
- Spicer Life non-greaseable universal joint with snap rings
- Inside and Outside Snap Ring Style (1330 OSR / S44 ISR)
- 1330/S44 Series
- Bearing Cap Diameter (OSR): 1.062 inches / Bearing Cap Diameter (ISR): 1.125 inches
- Bearing Cap to Bearing Cap (OSR): 3.625 inches / Length Between Snap Rings (ISR): 2.556 inches
- Spicer genuine OE replacement
- Inside and outside snap rings
- Outside to outside dimension: 3.625 inch; outside bearing cup dimension: 1.062 inch
- Inside to inside dimension: 2.556 inch; inside bearing cup dimension: 1.125 inch
- 2-0793, 290
Boston Gear SSFC20 SOLID Jaw Coupling Hub
Key Features
- Item - Jaw Coupling Hubs: Jaw Coupling Hub
- Size - Jaw Couplings: SSFC20
- Keyway Size Type: None
- Material - Hubs: Stainless Steel
- Outside Dia.: 2 in
- Assembled Coupling Length: 3.69 in
- Material: Stainless Steel
- Overall Length: 3.69 in
Couplings
Boston Gear FC20-9/16 Jaw coupling hub
- Size - Jaw Couplings: FC20
- Keyway Size Type: 1/8 in x 1/16 in
- Material - Hubs: Steel
- Outside Dia.: 2 in
- Assembled Coupling Length: 3.69 in
- Keyway Size: 1/8" x 1/16"
- Overall Length: 3.69 in
Couplings
Boston Gear FC20-7/8 Jaw coupling hub
Series | : | FC Series |
Coupling Size | : | FC20 |
Bore Diameter | : | 7/8 in |
Hub Diameter | : | 1-3/4 in |
Hub Length | : | 1-1/8 in |
Keyway Size | : | 3/16 x 3/32 in |
Maximum Speed | : | 1750 rpm |
Length Through Bore | : | 1-4/16 in |
Screw Size | : | 5/16-18 |
Material | : | Steel |
TB Woods MULTI-BEAM 51 - 703.51.5050
Typical Applications
• Stepper and servo drives • Encoders • General purpose light-duty power transmission
General Specifications • Temperature range: -40 to +140 Degrees C. • Standard speed rating: 5,000 rpm maximum. • Standard fasteners are 100% metric.
Materials & Finishes
• Couplings: Stainless Steel 303 S31 • Fasteners: Stainless Steel
Agricultural & Construction Machinery
Spicer 5-1410X U-Joint Kit 1410 SPL36 Series OSR
Greaseable N Type OSR Style Invoice U-Joint Kit OEM Mfg Spicer OEM Series 1410/SPL36 Bearing Cap Diameter (1) 1.188 Bearing Cap Diameter (2) 1.188 SR(1)Brng Cap to Brng Cap(OSR) 4.188 SR(2)Brng Cap to Brng Cap(OSR) 4.188 VMRS 024002046 Bearing Cap Type Round Snap Ring Type External Snap Ring Included Y Material Steel Hardware Included N Length A (In) 4.188 Length B (In) 4.188 Length A (mm) 106.4 Length B (mm) 106.4 Bearing Cap Type A OSR Bearing Cap Type B OSR Bearing Cap Diameter A (mm) 1.188 Bearing Cap Diameter B (mm) 1.188
Spicer 5-1310X U-Joint Kit 1310-SPL22 Series OSR
- Spicer Life non-greaseable universal joint with snap rings
- Outside Snap Ring Style (OSR)
- 1310/SPL22 Series
- Bearing Cap Diameter: 1.062 inches
- Bearing Cap to Bearing Cap: 3.219 inches
Spicer SPL55-1X U-Joint Kit 1480-SPL55 Series
The following parts may be used as alternates for this part:
Dana/Spicer 5-188X
Rockwell/Meritor CP188X
Borg Warner 114-588
Neapco 3-0188
Chrysler 1752307
Ford C1TT4724A
Ford C1TZ4635A
Ford F81Z4635CA
Ford F81Z4635CB
General Motors 100315
General Motors 2057289
General Motors 2341648
General Motors 2345726
General Motors 3737508
General Motors 3737589
General Motors 6268535
General Motors 15515792
General Motors 88934794
Precision 351
Automotive
Spicer 5-153X U-Joint Kit 1310 Series
Spicer greaseable universal joint with snap rings
- Outside Snap Ring Style (OSR)
- 1310 Series
- Bearing Cap Diameter: 1.062 inches
- Bearing Cap to Bearing Cap: 3.219 inches
Couplings
Boston Gear FC45 2in Steel FC Coupling
PRODUCT DETAILS
- Size FC45 Coupling Hub
- 2" Bore
FEATURES
- No lubricant required
- Complete with keyway and setscrew
- Precision machined
MFR # FC45 2 HALF HUB 08310
Couplings
Boston Gear FC20-1/2 Jaw coupling hub
RPM [MAX] | 1800 rpm |
LENGTH THROUGH BORE | 1.57 in |
OUTSIDE DIA. | 2 in |
KEYWAY SIZE | 1/8 x 1/16 |
LOCK TYPE | Setscrew |
COUPLING SIZE | FC20 |
MATERIAL | Steel |
HUB DIA. | 1 3/4 in |
WEIGHT | 1.181 LB |
EAN OR UPC | 781711082584 |
Couplings
Boston Gear FC20-3/4 Shaft Coupler hub
Size - Jaw Couplings FC20
Bore Dia. 3/4 in
Keyway Size Type 3/16 in x 3/32 in
Material - Hubs Steel
Outside Dia. 2 in
Assembled Coupling Length 3.69 in
Overall Length 3.69 in
UNSPSC 31163003
- Product Description
- Steel Jaw Coupling Hubs connect to drive shafts to provide dependable power transfer in high-temperature applications. A complete assembly requires two hubs and one jaw coupling spider, available separately.
Boston Gear XFCA45 Polyurethane Spider Insert
Boston Gear Polyurethane spider insert Boston Gear FC45 and SSFC45- Size - Jaw Couplings: FC45
- Material - Spiders: Polyurethane
- Rated Torque: 5,250 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 7.50
- Temp. Range: -32 Degrees to 200 Degrees F
- HP Rating @ 300 RPM: 22.4
Automotive
Reviews
There are no reviews yet.