Huco 723.51.4848
Huco 723.51.4848
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
SKU: B078YCBYXQ
Categories: Beam, Couplings, Collars & Universal Joiners, Flexible Couplings
Tags: beam coupling, Huco
Description
Coupling Type MultiBeam Coupling
Configuration 6 Beam Relieved Bore
Size 51
Material Stainless Steel
Max Bore B1 (mm) 26
Min Bore B1 (mm) 10
Max Bore B2 (mm) 26
Min Bore B2 (mm) 16
Angular Compensation, Max (degrees) 7
Bore Tolerance (mm) +0.03 / -0.00
Fastener Screw Size M6
Fastener Screw Torque (Nm) 9.75
Fastener Wrench Size (mm) 5
Max Speed (rpm) 5000
Operating Temperature (°C) -40 to +140
Peak Torque (Nm) 37
Radial Compensation, Max (mm) 0.9
Resists Axial Load Yes
Shaft Connection Clamp
Torsional Stiffness (Nm/rad) 783
Mass (Weight) (g) 996
[D] Outside Diameter (mm) 50.8
L1 Dimension (mm) 25
[L] Length (mm) 95.3
[L] Overall Length (mm) 95.3
Item Note
Coupling load capacity depends on the operating load cycle. Refer to catalog for further sizing information.
Additional information
Asin | B078YCBYXQ |
---|
Reviews (0)
Be the first to review “Huco 723.51.4848” Cancel reply
Related products
Boston Gear SSFC20-1 Jaw Coupling Hub 1/4 in x 1/8 in KW
SSFC Series Insert (3 Jaw) Type Couplings are made of 316 Stainless Steel and are available with precision machined bored or solid hubs. The SSFC Series coupling offers three types of inserts for different service requirements.
Spicer 5-7437X U-Joint Kit 7290-1330 SPL25 Series
- Spicer Life non-greaseable universal joint with snap rings
- Inside and Outside Snap Ring Style
- Bearing Cap Diameter (OSR): 1.062 inches / Bearing Cap Diameter (ISR): 1.125 inches
- Bearing Cap to Bearing Cap (OSR): 3.625 inches / Length Between Snap Rings (ISR): 2.625 inches
- Spicer genuine OE replacement
- Inside and outside snap rings
- Outside to outside dimension: 3.625 inch; outside bearing cup dimension: 1.062 inch
- Inside to inside dimension: 2.625 inch; inside bearing cup dimension: 1.125 inch
- 2-0355, 458
- These Universal Joints Fit Dodge Trucks as follows:1992-1999 DODGE Dakota1994-1999 DODGE RAM 1500 1999 DODGE RAM 1500 Van 1998-1999 DODGE RAM 2500 1998-1999 DODGE RAM 2500 Van 1997-1999 DODGE RAM 3500 1999 DODGE RAM 3500 Van 1998 DODGE B1500 1998 DODGE B2500 1999 DODGE Durango
Automotive
Spicer 5-1350X U-Joint Kit 1350/SPL30 Series
5-1350X Universal Joint
Description
Universal Joint; Non-Greaseable
Automotive
Spicer 5-188X U-Joint Kit 1480 Series OSR
- Spicer greaseable universal joint with snap rings
- Outside Snap Ring Style (OSR)
- 1480 Series
- Bearing Cap Diameter: 1.375 inches
- Bearing Cap to Bearing Cap: 4.188 inches
- Spicer genuine OE replacement
- Outside snap rings
- Outside to outside dimension: 4.188 inch
- Bearing cup size: 1.375 inch
- 3-0188, CP188X, 351
Agricultural & Construction Machinery
Spicer SPL70-1X U-Joint Kit 1550 SPL70 Series OSR
as follows: 2011-2017 Dodge Ram 4500 & ST Series - AWD & RWD with 3, 2 or 1 piece drive shafts 2011-2017 Dodge Ram 5500 & ST Series - AWD & RWD with 3, 2 or 1 piece drive shafts 2013-2017 Dodge Ram 2500 & SXT & ST Series - AWD & RWD with 3, 2 or 1 piece drive shafts 2013-2017 Dodge Ram 2500 & SXT & ST Series - AWD & RWD with 3, 2 or 1 piece drive shaftsCouplings
BOSTON GEAR SSFC12 Jaw Coupling Hub
- Size - Jaw Couplings: SSFC12
- Keyway Size Type: 1/8 in x 1/16 in
- Material - Hubs: Stainless Steel
- Outside Dia.: 1.25 in
- Assembled Coupling Length: 2.31 in
- Overall Length: 2.31 in
- Size: SSFC12
TB Woods MULTI-BEAM 51 - 703.51.5050
Typical Applications
• Stepper and servo drives • Encoders • General purpose light-duty power transmission
General Specifications • Temperature range: -40 to +140 Degrees C. • Standard speed rating: 5,000 rpm maximum. • Standard fasteners are 100% metric.
Materials & Finishes
• Couplings: Stainless Steel 303 S31 • Fasteners: Stainless Steel
Boston Gear SSFC20 3/4" SS Jaw Coupling Hub
Bore Dia. 3/4 in Keyway Size Type 3/16 in x 3/32 in Outside Dia. 2 in Assembled Coupling Length 3.69 in Keyway Size 3/16" x 3/32" Overall Length 3.69 in UPC Number 884107384221Couplings
Boston Gear FC20-3/4 Shaft Coupler hub
Size - Jaw Couplings FC20
Bore Dia. 3/4 in
Keyway Size Type 3/16 in x 3/32 in
Material - Hubs Steel
Outside Dia. 2 in
Assembled Coupling Length 3.69 in
Overall Length 3.69 in
UNSPSC 31163003
- Product Description
- Steel Jaw Coupling Hubs connect to drive shafts to provide dependable power transfer in high-temperature applications. A complete assembly requires two hubs and one jaw coupling spider, available separately.
Boston Gear XFCA30 Polyurethane Shaft Coupling Insert
Boston Gear Polyurethane Spider insert - Boston Gear FC30 and SSFC30
- Size - Jaw Couplings: FC30
- Material - Spiders: Polyurethane
- Rated Torque: 1,500 in-lb
- Max. RPM: 3,600 RPM
- HP Rating @ 100 RPM: 2.20
- Temp. Range: -32 Degrees to 200 Degrees F
- Serviceable Temp. Range (F): -32 to 200
Couplings
Boston Gear FC20-9/16 Jaw coupling hub
- Size - Jaw Couplings: FC20
- Keyway Size Type: 1/8 in x 1/16 in
- Material - Hubs: Steel
- Outside Dia.: 2 in
- Assembled Coupling Length: 3.69 in
- Keyway Size: 1/8" x 1/16"
- Overall Length: 3.69 in
Automotive
Spicer 5-3616X 1410 Series U-Joint Kit
COATED for ALUMINUM DRIVESHAFTS Dana Spicer 5-3616X is a solid body 1410 series universal joint with 4 zinc phosphate coated bearing caps specifically designed for aluminum driveshafts to eliminate corrosion caused by electrolysis. Fits light truck aluminum driveshaft applications that require a 1410 coated u-joint.Agricultural & Construction Machinery
Spicer 5-134X U-Joint Kit 1310-1330 Series OSR
- Spicer greaseable universal joint with snap rings
- Outside Snap Ring Style (OSR)
- 1310/1330 Series
- Bearing Cap Diameter: 1.062 inches
- Bearing Cap to Bearing Cap (1): 3.219 inches / Bearing Cap to Bearing Cap (2): 3.625 inches
- Spicer genuine OE replacement
- Outside snap rings
- Outside to outside dimension: 3.219 inch
- Bearing cup size: 1.062 inch
- 1-0134, CP134X, 353
Beam
TB Woods 703.51.4753
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Automotive
Spicer 5-101X 1100 Series U-Joint Kit
5-101X Universal Joint
Description
Universal Joint Non-Greaseable 1100 Series
Couplings
Boston Gear FC20-15/16 jaw coupling hub
Key Features
- Size - Jaw Couplings FC20
- Keyway Size Type 1/4 in x 1/8 in
- Material - Hubs Steel
- Outside Dia. 2 in
- Assembled Coupling Length 3.69 in
Agricultural & Construction Machinery
Spicer 5-795X U-Joint Kit S44 Series ISR
- Spicer Life non-greaseable universal joint with snap rings
- Inside Snap Ring Style (ISR)
- S44 Series
- Bearing Cap Diameter: 1.125 inches
- Length Between Snap Rings: 2.556 inches
Couplings
Boston Gear FC45 2in Steel FC Coupling
PRODUCT DETAILS
- Size FC45 Coupling Hub
- 2" Bore
FEATURES
- No lubricant required
- Complete with keyway and setscrew
- Precision machined
MFR # FC45 2 HALF HUB 08310
Boston Gear SSFC20-5/8 SS Jaw coupling hub
- Size - Jaw Couplings: SSFC20
- Keyway Size Type: 3/16 in x 3/32 in
- Material - Hubs: Stainless Steel
- Outside Dia.: 2 in
- Assembled Coupling Length: 3.69 in
- Overall Length: 3.69 in
- UPC 884107384214
BOSTON GEAR SSFC20 7/8 Jaw Coupling Hub w KW
Size - Jaw Couplings SSFC20
Bore Dia. 7/8 in
Keyway Size Type 3/16 in x 3/32 in
Material - Hubs Stainless Steel
Outside Dia. 2 in
Assembled Coupling Length 3.69 in
Overall Length 3.69 in
Manufacturer UPC Number 884107384238
Beam
Huco 723.51.4747
Six Beam Coupling, Clamp, Relieved, 51mm OD, 3/4in. x 3/4in. Bores
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Automotive
Spicer 5-153X U-Joint Kit 1310 Series
Spicer greaseable universal joint with snap rings
- Outside Snap Ring Style (OSR)
- 1310 Series
- Bearing Cap Diameter: 1.062 inches
- Bearing Cap to Bearing Cap: 3.219 inches
Spicer 5-1310X U-Joint Kit 1310-SPL22 Series OSR
- Spicer Life non-greaseable universal joint with snap rings
- Outside Snap Ring Style (OSR)
- 1310/SPL22 Series
- Bearing Cap Diameter: 1.062 inches
- Bearing Cap to Bearing Cap: 3.219 inches
Boston Gear XFCA45 Polyurethane Spider Insert
Boston Gear Polyurethane spider insert Boston Gear FC45 and SSFC45- Size - Jaw Couplings: FC45
- Material - Spiders: Polyurethane
- Rated Torque: 5,250 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 7.50
- Temp. Range: -32 Degrees to 200 Degrees F
- HP Rating @ 300 RPM: 22.4
Reviews
There are no reviews yet.