Huco 723.51.4747
Huco 723.51.4747
Six Beam Coupling, Clamp, Relieved, 51mm OD, 3/4in. x 3/4in. Bores
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
SKU: B078YB916H
Categories: Beam, Couplings, Collars & Universal Joiners
Tags: beam coupling, coupling, Huco
Description
Coupling Type MultiBeam Coupling
Configuration 6 Beam Relieved Bore
Size 51
Material Stainless Steel
Max Bore B1 (mm) 26
Min Bore B1 (mm) 10
Max Bore B2 (mm) 26
Min Bore B2 (mm) 16
Angular Compensation, Max (degrees) 7
Bore Tolerance (mm) +0.03 / -0.00
Fastener Screw Size M6
Fastener Screw Torque (Nm) 9.75
Fastener Wrench Size (mm) 5
Max Speed (rpm) 5000
Operating Temperature (°C) -40 to +140
Peak Torque (Nm) 37
Radial Compensation, Max (mm) 0.9
Resists Axial Load Yes
Shaft Connection Clamp
Torsional Stiffness (Nm/rad) 783
Mass (Weight) (g) 996
[D] Outside Diameter (mm) 50.8
L1 Dimension (mm) 25
[L] Length (mm) 95.3
[L] Overall Length (mm) 95.3
Item Note Coupling load capacity depends on the operating load cycle. Refer to catalog for further sizing information.
Additional information
Asin | B078YB916H |
---|
Reviews (0)
Be the first to review “Huco 723.51.4747” Cancel reply
Related products
Huco MULTI-BEAM 703.51
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Couplings
BOSTON GEAR SSFC12 Jaw Coupling Hub
- Size - Jaw Couplings: SSFC12
- Keyway Size Type: 1/8 in x 1/16 in
- Material - Hubs: Stainless Steel
- Outside Dia.: 1.25 in
- Assembled Coupling Length: 2.31 in
- Overall Length: 2.31 in
- Size: SSFC12
Boston Gear XFCR45 Rubber Shaft Coupling Insert
Boston Gear Rubber Spider Insert for Boston Gear FC45 and SSFC45- Size - Jaw Couplings: FC45
- Material - Spiders: Synthetic Rubber
- Rated Torque: 2,800 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 4.40
- Temp. Range: -32 Degrees to 200 Degrees F
- Coupling Size: FC45
-
XFCR45 RUBBER INSERT 08090
TB Woods MULTI-BEAM 51 - 703.51.5050
Typical Applications
• Stepper and servo drives • Encoders • General purpose light-duty power transmission
General Specifications • Temperature range: -40 to +140 Degrees C. • Standard speed rating: 5,000 rpm maximum. • Standard fasteners are 100% metric.
Materials & Finishes
• Couplings: Stainless Steel 303 S31 • Fasteners: Stainless Steel
Automotive
Spicer 5-789X U-Joint Kit 7260 Series
- Spicer Life non-greaseable axle shaft universal joint with snap rings
- Inside Snap Ring Style (ISR)
- 1310WJ Series
- Bearing Cap Diameter: 1.188 inches
- Length Between Snap Rings: 2.188 inches
Couplings
TB Woods WE10H158
TB Woods WE10 Tire Coupling Hub 1-5/8
WE10H158
TB Wood’s Dura-Flex® couplings are designed from the ground up using finite element analysis to maximize flex life. Perfect for a wide variety of applications -- including those with uniform to heavy shock loads -- Dura-Flex® couplings employ a light weight element that absorbs shock loading and torsional vibration. These couplings are available in stock bore-to-size (BTS), Taper-Lock® and Sure-Grip® bushed (QD) hubs.
Boston Gear XFCA30 Polyurethane Shaft Coupling Insert
Boston Gear Polyurethane Spider insert - Boston Gear FC30 and SSFC30
- Size - Jaw Couplings: FC30
- Material - Spiders: Polyurethane
- Rated Torque: 1,500 in-lb
- Max. RPM: 3,600 RPM
- HP Rating @ 100 RPM: 2.20
- Temp. Range: -32 Degrees to 200 Degrees F
- Serviceable Temp. Range (F): -32 to 200
Automotive
Spicer 5-105X Greaseable Universal Joint
5-105X Universal Joint
Description
Universal Joint Greaseable 1110 Series
Couplings
Boston Gear FC20-1/2 Jaw coupling hub
RPM [MAX] | 1800 rpm |
LENGTH THROUGH BORE | 1.57 in |
OUTSIDE DIA. | 2 in |
KEYWAY SIZE | 1/8 x 1/16 |
LOCK TYPE | Setscrew |
COUPLING SIZE | FC20 |
MATERIAL | Steel |
HUB DIA. | 1 3/4 in |
WEIGHT | 1.181 LB |
EAN OR UPC | 781711082584 |
Couplings
Boston Gear FC45 2in Steel FC Coupling
PRODUCT DETAILS
- Size FC45 Coupling Hub
- 2" Bore
FEATURES
- No lubricant required
- Complete with keyway and setscrew
- Precision machined
MFR # FC45 2 HALF HUB 08310
Couplings
Boston Gear FC20-9/16 Jaw coupling hub
- Size - Jaw Couplings: FC20
- Keyway Size Type: 1/8 in x 1/16 in
- Material - Hubs: Steel
- Outside Dia.: 2 in
- Assembled Coupling Length: 3.69 in
- Keyway Size: 1/8" x 1/16"
- Overall Length: 3.69 in
Couplings
Lovejoy UF-125 Dropout
Lovejoy 68514413942 Specifications
Description |
UF125 DROP OUT |
Hub Style |
Drop Out |
Coupling Type |
Flange-to-Flange |
Material |
Steel |
Color |
Gray/Metallic |
# of Mounting Screws Required |
3 |
Weight |
3.20 lb |
Beam
TB Woods 703.51.4145
TB Woods MULTI-BEAM 51 5/8 --18MM (703.51.4145)
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Boston Gear SSFC20-5/8 SS Jaw coupling hub
- Size - Jaw Couplings: SSFC20
- Keyway Size Type: 3/16 in x 3/32 in
- Material - Hubs: Stainless Steel
- Outside Dia.: 2 in
- Assembled Coupling Length: 3.69 in
- Overall Length: 3.69 in
- UPC 884107384214
Couplings
TB Woods 7SMPB
TB WOODS 7SMPB FLANGE COUPLING 5/8IN
7S X 5/8 (PLAIN BORE) SURE-FLEX FLANGE
- Bore: 5/8 IN
Couplings
Lovejoy UF-100 Dropout
Lovejoy 68514413938 Specifications
Description |
UF100 DROP OUT |
Hub Style |
Drop Out |
Coupling Type |
Flange-to-Flange |
Material |
Steel |
Color |
Gray/Metallic |
# of Mounting Screws Required |
3 |
Weight |
2.10 lb |
- Drop-out section for RRU-type Uniflex coupling and flange-to-flange flexible coupling
- Steel for strength and durability
- Accommodates angular and parallel misalignment
- Rotational speeds up to 30,000 rpm
- Set screw and key way for secure attachment to shaft
Couplings
TB Woods 1060T158
1060T X 1-5/8" G-Flex Grid Coupling Hub
Model: 1060T158
TB Wood’s Taper Grid Coupling is the industry standard, state-of-the-art design from TB Wood’s and Bibby Turboflex, the original grid coupling manufacturer. The G-Flex 1000 / Bibby 2000 Series is an all-metal coupling that provides positive protection against the damaging effects of shock loads and vibration. Aluminum horizontal cover (T10), and all-steel vertical cover (T20) designs are available. G-Flex tapered grid couplings are an excellent choice where torsional flexibility and vibration damping are primary concerns.Coil Spring
Lovejoy U137R 5/8 x 1 1/2
Lovejoy 68514476563 Specifications
Description |
U137R 5/8 KW*SSX1-1/2NKW NSS |
Hub Style |
Regular |
Type |
Shaft-to-Shaft |
Material |
Steel |
Weight |
4.72 lb |
Color |
Gray/Metallic |
Bore Type |
Finished Bore |
Ruland MDCD41-16-12-A
- Zero-backlash with anodized aluminum hubs for low inertia
- Balanced design reduces vibration at speeds up to 10,000 RPM
- Double disc style accommodates all forms of misalignment and is torsionally rigid making them well suited for precision positioning systems
- Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities
- Ruland disc couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant
Couplings
Boston Gear FC20-7/8 Jaw coupling hub
Series | : | FC Series |
Coupling Size | : | FC20 |
Bore Diameter | : | 7/8 in |
Hub Diameter | : | 1-3/4 in |
Hub Length | : | 1-1/8 in |
Keyway Size | : | 3/16 x 3/32 in |
Maximum Speed | : | 1750 rpm |
Length Through Bore | : | 1-4/16 in |
Screw Size | : | 5/16-18 |
Material | : | Steel |
Boston Gear XFCA45 Polyurethane Spider Insert
Boston Gear Polyurethane spider insert Boston Gear FC45 and SSFC45- Size - Jaw Couplings: FC45
- Material - Spiders: Polyurethane
- Rated Torque: 5,250 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 7.50
- Temp. Range: -32 Degrees to 200 Degrees F
- HP Rating @ 300 RPM: 22.4
Lovejoy 1080 SPACER HUB S=3.469
Specifications
Description |
1080 SPACER HUB S=3.469W/HDW |
Type |
Grid Coupling |
Hub Material |
Alloy Steel |
Color |
Gray/Metallic |
Bore Type |
No Bore |
Weight |
21.01 lb |
Spicer 5-1310-1X U-Joint Kit 1310/SPL22 Series
5-1310-1X Universal Joint
Description
Universal Joint; Greaseable
Lovejoy BWC41 3/8x3/8 Bellows Coupling
Item | Motion Control Coupling |
---|---|
Bore Dia. | 3/8 x 3/8" |
Hub Dia. | 1.26" |
Length through Bore | 14 mm |
Material | Aluminum Hubs, Stainless Steel Bellows |
Max. Angular Misalignment | 1.2 Degrees |
Max. Axial Misalignment (In.) | +/-0.012 |
Max. Bore | 16.00 mm |
Max. Bore | 0.63 |
Max. Parallel Misalignment (In.) | 0.004 |
Max. RPM | 15,000 |
---|---|
Max. Temp. Range (F) | 212 |
Min. Bore | 6 mm |
Outside Dia. | 32 mm |
Overall Length | 41mm |
Screw Size | M4 mm |
Screw Type | Clamp Screw |
Size | BWC41 |
Style | Bellows Clamp |
Torque | 39.83 In.Lbs. |
Shipping Information
Height (cm) | 3.81 |
---|---|
Length (cm) | 7.62 |
Width (cm) | 3.81 |
HS Code | 8483908040 |
Country Of Origin | DE |
---|---|
Weight (kg) | 0.07 |
UPC | 685144773906 |
Reviews
There are no reviews yet.