Huco 723.51.4747
Huco 723.51.4747
Six Beam Coupling, Clamp, Relieved, 51mm OD, 3/4in. x 3/4in. Bores
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
SKU: B078YB916H
Categories: Beam, Couplings, Collars & Universal Joiners
Tags: beam coupling, coupling, Huco
Description
Coupling Type MultiBeam Coupling
Configuration 6 Beam Relieved Bore
Size 51
Material Stainless Steel
Max Bore B1 (mm) 26
Min Bore B1 (mm) 10
Max Bore B2 (mm) 26
Min Bore B2 (mm) 16
Angular Compensation, Max (degrees) 7
Bore Tolerance (mm) +0.03 / -0.00
Fastener Screw Size M6
Fastener Screw Torque (Nm) 9.75
Fastener Wrench Size (mm) 5
Max Speed (rpm) 5000
Operating Temperature (°C) -40 to +140
Peak Torque (Nm) 37
Radial Compensation, Max (mm) 0.9
Resists Axial Load Yes
Shaft Connection Clamp
Torsional Stiffness (Nm/rad) 783
Mass (Weight) (g) 996
[D] Outside Diameter (mm) 50.8
L1 Dimension (mm) 25
[L] Length (mm) 95.3
[L] Overall Length (mm) 95.3
Item Note Coupling load capacity depends on the operating load cycle. Refer to catalog for further sizing information.
Additional information
Asin | B078YB916H |
---|
Reviews (0)
Be the first to review “Huco 723.51.4747” Cancel reply
Related products
Couplings
Lovejoy UF-100 Dropout
Lovejoy 68514413938 Specifications
Description |
UF100 DROP OUT |
Hub Style |
Drop Out |
Coupling Type |
Flange-to-Flange |
Material |
Steel |
Color |
Gray/Metallic |
# of Mounting Screws Required |
3 |
Weight |
2.10 lb |
- Drop-out section for RRU-type Uniflex coupling and flange-to-flange flexible coupling
- Steel for strength and durability
- Accommodates angular and parallel misalignment
- Rotational speeds up to 30,000 rpm
- Set screw and key way for secure attachment to shaft
Couplings
TB WOODS 3J Coupling Sleeve Insert, Sure-Flex, Size 3, J Type, 1-1/4" BORE, 1-15/16" OD, 1" Width
3JE EPDM Sleeve, One-Piece Construction
Model: 3J
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.
TB Woods MULTI-BEAM 51 - 703.51.5050
Typical Applications
• Stepper and servo drives • Encoders • General purpose light-duty power transmission
General Specifications • Temperature range: -40 to +140 Degrees C. • Standard speed rating: 5,000 rpm maximum. • Standard fasteners are 100% metric.
Materials & Finishes
• Couplings: Stainless Steel 303 S31 • Fasteners: Stainless Steel
Grid
TB Woods 1060T78
1060T X 7/8 G-Flex Grid Coupling Hub
Model: 1060T78
TB Wood’s Taper Grid Coupling is the industry standard, state-of-the-art design from TB Wood’s and Bibby Turboflex, the original grid coupling manufacturer. The G-Flex 1000 / Bibby 2000 Series is an all-metal coupling that provides positive protection against the damaging effects of shock loads and vibration. Aluminum horizontal cover (T10), and all-steel vertical cover (T20) designs are available. G-Flex tapered grid couplings are an excellent choice where torsional flexibility and vibration damping are primary concerns.
Boston Gear XFCA45 Polyurethane Spider Insert
Boston Gear Polyurethane spider insert Boston Gear FC45 and SSFC45- Size - Jaw Couplings: FC45
- Material - Spiders: Polyurethane
- Rated Torque: 5,250 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 7.50
- Temp. Range: -32 Degrees to 200 Degrees F
- HP Rating @ 300 RPM: 22.4
Lovejoy 1080 SPACER HUB S=3.469
Specifications
Description |
1080 SPACER HUB S=3.469W/HDW |
Type |
Grid Coupling |
Hub Material |
Alloy Steel |
Color |
Gray/Metallic |
Bore Type |
No Bore |
Weight |
21.01 lb |
Automotive
Spicer 5-101X 1100 Series U-Joint Kit
5-101X Universal Joint
Description
Universal Joint Non-Greaseable 1100 Series
Boston Gear XFCA30 Polyurethane Shaft Coupling Insert
Boston Gear Polyurethane Spider insert - Boston Gear FC30 and SSFC30
- Size - Jaw Couplings: FC30
- Material - Spiders: Polyurethane
- Rated Torque: 1,500 in-lb
- Max. RPM: 3,600 RPM
- HP Rating @ 100 RPM: 2.20
- Temp. Range: -32 Degrees to 200 Degrees F
- Serviceable Temp. Range (F): -32 to 200
Couplings
BOSTON GEAR FC-15-1/2 SHAFT COUPLING
Boston Gear FC15 1/2
Steel FC Coupling, Size 15, 1/2 in. Bore
MFR #FC15 1/2
Couplings
BOSTON GEAR SSFC12 Jaw Coupling Hub
- Size - Jaw Couplings: SSFC12
- Keyway Size Type: 1/8 in x 1/16 in
- Material - Hubs: Stainless Steel
- Outside Dia.: 1.25 in
- Assembled Coupling Length: 2.31 in
- Overall Length: 2.31 in
- Size: SSFC12
Boston Gear XFCR45 Rubber Shaft Coupling Insert
Boston Gear Rubber Spider Insert for Boston Gear FC45 and SSFC45- Size - Jaw Couplings: FC45
- Material - Spiders: Synthetic Rubber
- Rated Torque: 2,800 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 4.40
- Temp. Range: -32 Degrees to 200 Degrees F
- Coupling Size: FC45
-
XFCR45 RUBBER INSERT 08090
BOSTON GEAR SSFC20 7/8 Jaw Coupling Hub w KW
Size - Jaw Couplings SSFC20
Bore Dia. 7/8 in
Keyway Size Type 3/16 in x 3/32 in
Material - Hubs Stainless Steel
Outside Dia. 2 in
Assembled Coupling Length 3.69 in
Overall Length 3.69 in
Manufacturer UPC Number 884107384238
Beam
TB Woods 703.51.4753
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Beam
TB Woods 703.51.4145
TB Woods MULTI-BEAM 51 5/8 --18MM (703.51.4145)
51mm Diameter 6-Beam Coupling
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
These general purpose, multi-beam couplings will readily accommodate any combination of axial motion and angular & parallel misalignment but should be used with caution if low bearing loads are desirable.
Boston Gear SSFC20 3/4" SS Jaw Coupling Hub
Bore Dia. 3/4 in Keyway Size Type 3/16 in x 3/32 in Outside Dia. 2 in Assembled Coupling Length 3.69 in Keyway Size 3/16" x 3/32" Overall Length 3.69 in UPC Number 884107384221Couplings
Lovejoy UF-125 Dropout
Lovejoy 68514413942 Specifications
Description |
UF125 DROP OUT |
Hub Style |
Drop Out |
Coupling Type |
Flange-to-Flange |
Material |
Steel |
Color |
Gray/Metallic |
# of Mounting Screws Required |
3 |
Weight |
3.20 lb |
Couplings
Boston Gear FC20-1/2 Jaw coupling hub
RPM [MAX] | 1800 rpm |
LENGTH THROUGH BORE | 1.57 in |
OUTSIDE DIA. | 2 in |
KEYWAY SIZE | 1/8 x 1/16 |
LOCK TYPE | Setscrew |
COUPLING SIZE | FC20 |
MATERIAL | Steel |
HUB DIA. | 1 3/4 in |
WEIGHT | 1.181 LB |
EAN OR UPC | 781711082584 |
Gear & Sleeve
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
Specifications
Description |
8E SLEEVE |
Coupling Size |
8E |
Sleeve Type |
E |
Type |
Sleeves for S-Flex Endurance Couplings |
Material |
EPDM |
Color |
Black |
Connection Type A x B |
Coupling Sleeve |
Weight |
1.15 lb |
Nominal Torque |
1475 in·lb166.66 N·m |
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
- Lovejoy offers flexible sleeves for S-Flex Endurance couplings in three designs: one-piece solid, one-piece split, and two-piece with retaining ring
- The one-piece split design provides solutions for applications with unique requirements where small shaft separations inhibit the installation of a one-piece solid sleeve
- Pre-molded teeth along the diameter of the sleeve engage with teeth of the coupling flanges
- No clamps or screws are needed to connect the flanges with the
Boston Gear SSFC20 SOLID Jaw Coupling Hub
Key Features
- Item - Jaw Coupling Hubs: Jaw Coupling Hub
- Size - Jaw Couplings: SSFC20
- Keyway Size Type: None
- Material - Hubs: Stainless Steel
- Outside Dia.: 2 in
- Assembled Coupling Length: 3.69 in
- Material: Stainless Steel
- Overall Length: 3.69 in
Couplings
Boston Gear FC20-3/4 Shaft Coupler hub
Size - Jaw Couplings FC20
Bore Dia. 3/4 in
Keyway Size Type 3/16 in x 3/32 in
Material - Hubs Steel
Outside Dia. 2 in
Assembled Coupling Length 3.69 in
Overall Length 3.69 in
UNSPSC 31163003
- Product Description
- Steel Jaw Coupling Hubs connect to drive shafts to provide dependable power transfer in high-temperature applications. A complete assembly requires two hubs and one jaw coupling spider, available separately.
Couplings
TB Woods 7SMPB
TB WOODS 7SMPB FLANGE COUPLING 5/8IN
7S X 5/8 (PLAIN BORE) SURE-FLEX FLANGE
- Bore: 5/8 IN
Couplings
Boston Gear FC20-15/16 jaw coupling hub
Key Features
- Size - Jaw Couplings FC20
- Keyway Size Type 1/4 in x 1/8 in
- Material - Hubs Steel
- Outside Dia. 2 in
- Assembled Coupling Length 3.69 in
Coil Spring
Lovejoy U137R 5/8 x 1 1/2
Lovejoy 68514476563 Specifications
Description |
U137R 5/8 KW*SSX1-1/2NKW NSS |
Hub Style |
Regular |
Type |
Shaft-to-Shaft |
Material |
Steel |
Weight |
4.72 lb |
Color |
Gray/Metallic |
Bore Type |
Finished Bore |
Reviews
There are no reviews yet.