Meritor is a global supplier for commercial vehicle manufacturers for specialty industries with a wide range of aftermarket solutions from drivetrain to brake systems.
Description
Additional information
Asin | B088SSM34B |
---|---|
Dimensions | 14.5 x 14.5 x 10 inches |
Weight | 35 pounds |
Manufacturer | Meritor Genuine |
Reviews (0)
Be the first to review “DRIVELINE – SPLINE PLUG” Cancel reply
Related products
Agricultural & Construction Machinery
Weasler 806-3522 Yoke
35 series yoke with round with 2 keyways bore and setscrew connection
Agricultural & Construction Machinery
Neapco 22-2317 PTO QD Yoke
22-2317 Power Take Off Quick Disconnect Yoke
Part Number 22-2317
Application: Automotive/Ag./Ind. PTO
Bore Size & Shape(In)(Mm): 1.375-21 Involute Spline
Bore Type: Splined
Center Line To End Of Hub (In): 4.810
Driveline Series: 2200
End Of Hub To Set Screw (In): 1.000
Hub Diameter (In): 2.280
Set Screw Location: Gap
Set Screw Thread Size (In)(Mm): 0.560
Automotive
Neapco 56-2600 Power Take Off Retainer
56-2600 Power Take Off Retainer
Part Number 56-2600
Description: Contains (2) WPB8-26 Retainers, 2600 Series, 2.868" ID
Quantity: 2
Agricultural & Construction Machinery
Weasler 302-5500 Shaft Weld Yoke
55 Series Weld Yoke
55 series yoke with 1 11/16-20 spline bore and weld connection
Weasler yoke weldment assemblies provide yoke to shaft and yoke to tube weldment options that are offered in both North American (domestic) , German, and Italian shaft and tube shapes.- Fits Series 55N: U-Joint Cap Size: 1-17/32” / 1.531” Cap to Cap: 4-5/16” / 4.313”.
- 2660302-5500, 302 5500, 302-5500, 3025500, 55N302-5500, 55N3025500, 971-3025500, 9713025500, PM302-5500
- 55N Series
- PTO
Agricultural & Construction Machinery
Neapco 22-2312 PTO Quick Disconnect Yoke
22-2312 Power Take Off Quick Disconnect Yoke
Part Number 22-2312
Application: Automotive/Ag./Ind. PTO
Bore Size & Shape(In)(Mm): 1.375-6B Spline
Bore Type: Splined
Center Line To End Of Hub (In): 4.810
Driveline Series: 2200
End Of Hub To Set Screw (In): 1.000
Hub Diameter (In): 2.280
Set Screw Location: Gap
Set Screw Thread Size (In)(Mm): 0.560
Agricultural & Construction Machinery
Weasler 101-7620 Yoke
AW35 series yoke with 1 3/4-20 spline bore and safety slide lock connection
Agricultural & Construction Machinery
Weasler 700-6443 Yoke
AB4 series yoke with 43 mm trilobe bore and roll pin connection
Shaft yokes (or inner profile yokes) connect the cross and bearing kits to the telescoping shaft or inner tube. Tube yokes (or outer profile yokes), connect the other cross and bearing kits to the opposite side of the telescoping shaft or outer tube. Weasler provides both domestic (North American) and Weasler Profile metric shaft and tube yoke connection options. Domestic yokes are provided as square, rectangle, hexagon or splined in shape. Weasler Profile metric yokes are provided as lemon, star, or trilobe in shape.
Neapco 8-2420 PTO End Yoke
8-2420 Power Take Off End Yoke
Part Number 8-2420
Application: Automotive/Ag./Ind. PTO
Bore Size & Shape(In)(Mm): 1.891 Outer Profile
Bore Type: Outer Tube Profile
Center Line To End Of Hub (In): 3.781
Driveline Series: W2400
Agricultural & Construction Machinery
Neapco 8-2012 PTO Quick Disconnect Yoke
8-2012 Power Take Off Quick Disconnect Yoke
Part Number 8-2012
Application: Automotive/Ag./Ind. PTO
Bore Size & Shape(In)(Mm): 1.375-6 Spline
Bore Type: Splined
Center Line To End Of Hub (In): 3.812
Driveline Series: W2200
Spline Od(In)/No. Teeth: 1.375-6
Automotive
Neapco N2-4-JK02 Driveshaft End Yoke
N2-4-JK02 Driveshaft End Yoke - Conversion
Part Number N2-4-JK02
Bore Type: Splined
Center Line Uj To End Of Hub (In): 3.000
Driveline Series: 1310HR
Hub Diameter (In): 1.875
Joint Angle (Degrees): 22.000
Length Thru Hole(In): 1.500
Spline Od(In)/No. Teeth: 1.250-24
Uj Retention: U-Bolt
Agricultural & Construction Machinery
Weasler 10001248 Yoke and Shaft Assembly
12 Series Yoke And Shaft
12 series yoke and shaft, 1 x 1 1/8 rectangle
Weasler yoke weldment assemblies provide yoke to shaft and yoke to tube weldment options that are offered in both North American (domestic) , German, and Italian shaft and tube shapes.Agricultural & Construction Machinery
Weasler 807-3520 Yoke
35 series yoke with 1 3/4-20 spline bore and clamp connection
The clamp yoke allows for a tight connection to a mating shaft to minimize fretting corrosion and wear, using standard hardware.Agricultural & Construction Machinery
Neapco 12-2300 PTO QD Yoke
12-2300 Power Take Off Quick Disconnect Yoke
Part Number 12-2300
Application: Automotive/Ag./Ind. PTO
Bore Size & Shape(In)(Mm): 1.000-15 Involute Spline
Bore Type: Splined
Center Line To End Of Hub (In): 3.500
Driveline Series: 1200
Hub Diameter (In): 1.500
Set Screw Location: GAP
Set Screw Thread Size (In)(Mm): (2) 0.377 (QD Ball Hole)
Agricultural & Construction Machinery
Weasler 800-4424 Yoke
44 Series Setscrew Yoke
44 series yoke with round with keyway bore and setscrew connection
PTO drive shafts end with an implement yoke, it is the final connection between the PTO drive shaft and the machine or implement connected to the tractor. Weasler implement yokes are provided in a variety of bore and mounting options. Bore options include square, rectangle, hexagon, round and spline. Standard yoke connection options are set screws and pins. Additional implement yoke connection options include torque limiter flange yokes, telescoping yokes (square, round, and hexagon), and clamp yokes.Agricultural & Construction Machinery
Moog 1397 Yoke
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.- Machined Bodies to meet the tight tolerances
- Forged and cast material to meet the performance requirement
- Minimize the flash Lines for less interference
- Cleaning process induces compressive strength for increased performance
- Machined and threaded holes for mounting ease
Yokes
- Fits 1310 Series U-Joints (3 1/4" Wide, 1 1/16" Cap Diameter)
- For 1310 Series Double Cardan CV Driveshafts
- Center to Center of U-Joints: 2.69"
- Interchangeable with Spicer 2-26-497 H Yoke
Reviews
There are no reviews yet.