Fully interchangeable by component with other tapered grid couplingsProvide torsional damping to reduce torsional vibration and cushion shock loadsGrids act much like a protective overload shear device during overloads to protect expensive, connected equipmentQuick and easy installation with low maintenance1 Year WarrantySpeicfication: coupling size code: 1130 overall length: 7.6900 ingrid coupling type: Standard Grid Tapertorque capacity: 160000 in-lbsbore type: Solid Borehorsepower @ 100 rpm: 257 hpmaximum bore diameter: 6.0000 inmaximum rpm: 1800 rpm type: Horizontal Splithub material: Carbon Steelcoupling outside diameter: 13.6200 inangular misalignment: 0.003 coupling overall length: 13.0000 in material: Aluminumlength through bore: 6.3800 inmaximum angular misalignment: 0.012 gap: 0.2500 indistance between shafts: 8.5600 inhub outside diameter: 8.5600 inweight: 259.82 lbs
2282309 Complete Grid Coupling – Cplg Size: 1130, Solid Bore, 6.0000 in Max Bore, 13.0000 in Overall Length, 6.3800 in Length Through Bore
SKU: B09H7HR2HT
Category: Multi-Flex
Description
Additional information
Asin | B09H7HR2HT |
---|---|
Dimensions | |
Weight | |
Manufacturer | Generic |
Reviews (0)
Be the first to review “2282309 Complete Grid Coupling – Cplg Size: 1130, Solid Bore, 6.0000 in Max Bore, 13.0000 in Overall Length, 6.3800 in Length Through Bore” Cancel reply
Related products
Gear & Sleeve
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
Specifications
Description |
8E SLEEVE |
Coupling Size |
8E |
Sleeve Type |
E |
Type |
Sleeves for S-Flex Endurance Couplings |
Material |
EPDM |
Color |
Black |
Connection Type A x B |
Coupling Sleeve |
Weight |
1.15 lb |
Nominal Torque |
1475 in·lb166.66 N·m |
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
- Lovejoy offers flexible sleeves for S-Flex Endurance couplings in three designs: one-piece solid, one-piece split, and two-piece with retaining ring
- The one-piece split design provides solutions for applications with unique requirements where small shaft separations inhibit the installation of a one-piece solid sleeve
- Pre-molded teeth along the diameter of the sleeve engage with teeth of the coupling flanges
- No clamps or screws are needed to connect the flanges with the
- For use with Lovejoy curved jaw style flexible coupling assembly (sold separately)
- Urethane for transferring and absorbing shock load
- Absorbs shock and misalignment within the coupling assembly for reduced wear on the shaft assembly
- Country of origin: Poland
- For use with Lovejoy jaw type flexible coupling assembly (sold separately)
- Nitrile rubber for transferring and absorbing shock load
- Solid center design to keep shafts of the driver and driven equipment separate by a standard gap
- Operating temperatures range from -40 to 212 degrees F (-40 to 100 degrees C)
- For use with Lovejoy RRSC type Jaw style flexible coupling assembly (sold separately)
- Transfers shock and misalignment to the center element of the coupling assembly for reduced wear on the shaft assembly
- Tines for locking hub to spacer assembly
- Country of origin: United States
Multi-Flex
Lovejoy 68514426082 22 Saga Coupling, 1" x 1" Bore, 3" Length Through Bore, 7.31" OD, 8.69" OAL
- General purpose, torsionally soft coupling
- Two hubs connected with a SAGA donut
- Has a high tolerance for all forms of misalignment
- Country of origin: United States
Reviews
There are no reviews yet.