This Martin Quadra-Flex spacer coupling S style flange replaces flanges on Martin Quadra-Flex series flexible couplings, meshes with S style spacers, and is made of cast iron for non-corrosive applications where strength and heat dissipation are factors and weight is not. It transfers shock and misalignment to the center element of the coupling assembly for reduced wear on the shaft assembly, and its teeth help to distribute torsional load across the sleeve, reducing wear and extending service life. Martin Quadra-Flex couplings are suitable for use in applications that require torsional flexibility and the capacity to withstand shock loads and vibration, including blowers, compressors, conveyors, dredges, feeders, generators, mills, and presses, among others.Flexible couplings are used to link two rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from one shaft to the other. Most flexible couplings consist of two hubs and a middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the two shafts. Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from one shaft to another in the form of stresses, loads, vibrations, and other forces, which vary from one type of misalignment to another. Flexible couplings are used in a broad range of applications, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.Martin Sprocket & Gear manufactures power transmission and conveying products. Martin provides tools that meet American National Standards Institute (ANSI), National Aerospace Standard (NAS), and Deutsches Institut für Normung (DIN) standards. The company, founded in 1951, is headquartered in Arlington, TX.
Martin 9S Quadraflex Coupling Flange, Cast Iron, Metric, 48 mm Bore A, 48 mm Bore B, 161.29 mm OD, 61.119 mm Length, 203.39 Nm Nominal Torque
SKU: B004BJ1CJO
Category: Spider
Description
Additional information
Asin | B004BJ1CJO |
---|---|
Dimensions | |
Weight | |
Manufacturer |
Reviews (0)
Be the first to review “Martin 9S Quadraflex Coupling Flange, Cast Iron, Metric, 48 mm Bore A, 48 mm Bore B, 161.29 mm OD, 61.119 mm Length, 203.39 Nm Nominal Torque” Cancel reply
Related products
Boston Gear XFCR30 Rubber Coupling Insert
Boston Gear Rubber spider insert for Boston Gear FC30 and SSFC30- Size - Jaw Couplings: FC30
- Material - Spiders: Synthetic Rubber
- Rated Torque: 800 in-lb
- Max. RPM: 3,600 RPM
- HP Rating @ 100 RPM: 1.30
- Temp. Range: -32 Degrees to 200 Degrees F
- Max. Torque (In.-Lbs.): 800
Boston Gear XFCBB20 Bost-Bronz Coupling Insert
OVERVIEW
MFR DESCRIPTION
XFCBB20 BRONZE INSERTS 08068
- Oil-Resistant Synthetic Rubber is recommended where quietness is desired, particularly at motor speeds
- Polyurethane is recommended where moderate to heavy shock loads are encountered
- Oil-Impregnated Bost-Bronze is recommended for high torque loads, particularly at slower speeds
Boston Gear XFCBB38 Bost-Bronz Coupling Insert
Boston Gear Bost-Bronz spider insert for Boston Gear FC38 and SSFC38
MFR # XFCBB38 BRONZE INSERTS 08074
Couplings
Lovejoy L100 HUB 1-1/4 1/4X1/8 KW
Lovejoy 68514411520 Specifications
Description |
L100 HUB 1-1/4 1/4X1/8 KW |
Hub Style |
1 |
Coupling Type |
Jaw |
Material |
Sintered Iron |
Color |
Metallic |
# of Jaws |
3 |
Elastomeric Member |
SOX (NBR) Rubber |
Weight |
1.25 lb |
Weight (Complete Coupling w/ Max. Bores) |
3.20 lb |
Weight (Complete Coupling w/ Min. Bores) |
2.40 lb |
- For use with Lovejoy L type Jaw style flexible coupling assembly (sold separately)
- Iron sintered with powdered metals for strength, durability, and corrosion resistance
- Transfers shock and misalignment to the center element of the coupling assembly for reduced wear on the shaft assembly
- Country of origin: United States
Boston Gear XFCR38 Rubber Coupling Insert
Boston Gear Rubber Spider Insert for Boston Gear FC38 and SSFC38
- Size - Jaw Couplings: FC38
- Material - Spiders: Synthetic Rubber
- Rated Torque: 1,600 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 2.50
- Temp. Range: -32 Degrees to 200 Degrees F
- Item: Oil Resistant Spider Insert
Boston Gear XFCR25 Rubber Coupling Insert
Boston Gear Rubber spider insert for Boston Gear FC25 and SSFC25
BOSTON GEAR Oil Resistant Spider Insert: FC25, 450 in-lb Rated Torque, 3,600 RPM Max., -32° to 200°F
Mfr. Model XFCR25
Boston Gear XFCA38 Polyurethane Shaft Coupling Insert
Boston Gear Polyurethane Spider Insert for Boston Gear FC38 and SSFC38- Size - Jaw Couplings: FC38
- Material - Spiders: Polyurethane
- Rated Torque: 3,000 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 4.30
- Temp. Range: -32 Degrees to 200 Degrees F
- HP Rating @ 1150 RPM: 45.8 hp
Boston Gear XFCA30 Polyurethane Shaft Coupling Insert
Boston Gear Polyurethane Spider insert - Boston Gear FC30 and SSFC30
- Size - Jaw Couplings: FC30
- Material - Spiders: Polyurethane
- Rated Torque: 1,500 in-lb
- Max. RPM: 3,600 RPM
- HP Rating @ 100 RPM: 2.20
- Temp. Range: -32 Degrees to 200 Degrees F
- Serviceable Temp. Range (F): -32 to 200
- For use with Lovejoy L type Jaw style flexible coupling assembly (sold separately)
- Iron sintered with powdered metals for strength, durability, and corrosion resistance
- Transfers shock and misalignment to the center element of the coupling assembly for reduced wear on the shaft assembly
- Unit count: 1.0
Boston Gear XFCBB45 BOST-BRONZ Shaft Coupling Insert
Boston Gear Bost-Bronz spider insert for Boston Gear FC45 and SSFC45
Mfr # XFCBB45 BRONZE INSERTS 08076
Gear & Sleeve
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
Specifications
Description |
8E SLEEVE |
Coupling Size |
8E |
Sleeve Type |
E |
Type |
Sleeves for S-Flex Endurance Couplings |
Material |
EPDM |
Color |
Black |
Connection Type A x B |
Coupling Sleeve |
Weight |
1.15 lb |
Nominal Torque |
1475 in·lb166.66 N·m |
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
- Lovejoy offers flexible sleeves for S-Flex Endurance couplings in three designs: one-piece solid, one-piece split, and two-piece with retaining ring
- The one-piece split design provides solutions for applications with unique requirements where small shaft separations inhibit the installation of a one-piece solid sleeve
- Pre-molded teeth along the diameter of the sleeve engage with teeth of the coupling flanges
- No clamps or screws are needed to connect the flanges with the
Boston Gear XFCBB12 BOST-BRONZ Shaft Coupling Insert
Boston Gear Bost-Bronz spider insert for Boston Gear FC12 and SSFC12
PRODUCT DETAILS
- Size FC12 Coupling Insert
- Bronze
FEATURES
- Recommended for high torque loads, particularly at slower speeds
- Mfr # 08064
Boston Gear XFCA45 Polyurethane Spider Insert
Boston Gear Polyurethane spider insert Boston Gear FC45 and SSFC45- Size - Jaw Couplings: FC45
- Material - Spiders: Polyurethane
- Rated Torque: 5,250 in-lb
- Max. RPM: 1,800 RPM
- HP Rating @ 100 RPM: 7.50
- Temp. Range: -32 Degrees to 200 Degrees F
- HP Rating @ 300 RPM: 22.4
Couplings
Boston Gear XFCR12 Rubber Spider Insert
Boston Gear Rubber spider insert for Boston Gear FC12 and SSFC12
- Size - Jaw Couplings: FC12
- Material - Spiders: Synthetic Rubber
- Rated Torque: 65 in-lb
- Max. RPM: 3,600 RPM
- HP Rating @ 100 RPM: 0.10
- Temp. Range: -32 Degrees to 200 Degrees F
- Type: Oil Resistant
Boston Gear XFCBB30 BOST-BRONZ Shaft Coupling Insert
Boston Gear Bost-Bronz spider insert for Boston Gear FC30 and SSFC30
MFR # BRONZE INSERTS 08072
BOSTON GEAR Oil Impregnated Spider Insert: FC30, 3,200 in-lb Rated Torque, 690 RPM Max., Bronze
Reviews
There are no reviews yet.