This Martin Quadra-Flex coupling sleeve is for use with Martin S and SC style flanges in the Quadra-Flex series flexible couplings. It is made of thermoplastic polyester elastomer for high torque and high temperature applications and its teeth help to distribute torsional load across it and the flanges, reducing wear and extending service life. This Quadra-Flex coupling sleeve comes in two types: one piece (Type H), and two-piece that is held together with a metal retaining ring (Type HS) for applications where space limitations prevent the installation of a one piece sleeve. Martin Quadra-Flex couplings are suitable for use in applications that require torsional flexibility and the capacity to withstand shock loads and vibration, including blowers, compressors, conveyors, dredges, feeders, generators, mills, and presses, among others.Flexible couplings are used to link two rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from one shaft to the other. Most flexible couplings consist of two hubs and a middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the two shafts. Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from one shaft to another in the form of stresses, loads, vibrations, and other forces, which vary from one type of misalignment to another. Flexible couplings are used in a broad range of applications, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.Martin Sprocket & Gear manufactures power transmission and conveying products. Martin provides tools that meet American National Standards Institute (ANSI), National Aerospace Standard (NAS), and Deutsches Institut für Normung (DIN) standards. The company, founded in 1951, is headquartered in Arlington, TX.
Martin 7H Quadraflex Sleeve, Hytrel, Inch, 4.344" OD, 2.188" Length
- For use with Martin S and SC type flanges in the Quadra-Flex series flexible coupling assemblies (sold separately)
- Thermoplastic polyester elastomer for high torque and high temperature applications
- Two types: one piece (Type H) and two-piece held together with a metal retaining ring (Type HS) for applications where space limitations prevent the installation of a one piece sleeve
- Teeth help to distribute torsional load across the sleeve and flanges, reducing wear and extending service life
Description
Additional information
| Asin | B004BJ1A50 |
|---|---|
| Dimensions | |
| Weight | |
| Manufacturer |
Reviews (0)
Be the first to review “Martin 7H Quadraflex Sleeve, Hytrel, Inch, 4.344" OD, 2.188" Length”
Related products
- For use with Martin spider(sold separately)
- Stainless steel for strength, durability, and corrosion resistance
- Resistant to moisture, oil, grease, and contaminants such as dirt and sand
- Flexes up to 1 degree to compensate for angular misalignment of coupled shafts
- Operating temperatures range from -45 to 210 degrees F (-42 to 99 degrees C)
- For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately)
- Thermoplastic rubber for resistance to oil and higher temperatures
- Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate
- Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C)
Roller Chain
- For use with Martin Spacer Coupling (SC) type Quadra-Flex series flexible coupling assemblies (sold separately)
- High carbon steel for better wear and longer life over hubs made from steel alloys with less or no carbon, or non-steel alloys
- Available in regular (H type) or short (HS type) lengths to accommodate the spacing requirements of the application
- Attaches to SC type spacer flanges with four bolts
- Simplex sprocket coupling half for joining two perpendicular shafts
- High carbon steel for tensile strength and hardness
- Hardened teeth for resistance to wear and fatigue
- Accommodates up to 2 degrees of angular misalignment between shafts
- Meets ANSI standards
Roller Chain
- For use with some flexible coupling assemblies (sold separately) in the Martin Quadra-Flex series
- Steel sintered with powdered metals for strength, durability, and corrosion resistance
- Transfers shock and misalignment to the center element of the coupling assembly for reduced wear on the shaft assembly
- Teeth help to distribute torsional load across the flange and sleeve, reducing wear and extending service life
Roller Chain
Martin E9 Martin-Flex Coupling, Neoprene, Inch, 9.25" OD, 9.25" Length, 4349 in-lbs Nominal Torque
- For use with Martin Martin-Flex style flexible coupling assembly (sold separately)
- Neoprene for transferring and absorbing shock load and high resistance to oils
- Flexes up to 4 degrees to compensate for angular misalignment of coupled shafts
- Operating temperatures range from -45 to 210 degrees F (-42 to 99 degrees C)
- For use with specific Martin flange types (J type flanges in the case of JEM and JEMS type sleeves, and all flange types in the case of EM type sleeves) in the Quadra-Flex series flexible coupling assemblies (sold separately)
- Thermoplastic rubber for resistance to oil and higher temperatures
- Three types: one-piece solid (Type JEM), one-piece split (Type JEMS), and two-piece split with a metal retaining ring (Type EM) for applications where the coupled shafts are difficult to separate
- Operating temperatures range from -50 to 275 degrees F (-46 to 135 degrees C)
Reviews
There are no reviews yet.