Motion Control Shaft Couplings Zero backlash Transmit low reactionary loads on bearings Nonlubricated couplings for applications where 2 shafts must move at the same speed, to the same location. Maintain constant velocity and provide protection from misalignment and corrosive elements. Suitable for light-duty applications with torque ratings less than 50 in.-lb., low inertia, and the capability of cyclic (repeated stop/stop/reverse) activity. Use in applications with a fractional electric motor driver, such as shaft encoders, medical equipment, servo devices, robots, linear and ball screw actuators, step motors, light-duty pumps and metering devices, plotters, positioning tables, computers, and radar. Bellows Clamp, BWC Series Max. temp.: 212°F (100°C) Maintenance-free design offers low inertia and the highest amount of torsional stiffness for accuracy and repeatability. Corrosion-resistant. This listing is for each. Technical Specification Item - Motion Control Couplings Motion Control Coupling Shaft Locking Type - Couplings 1 Piece Clamp Bore Dia. 5/8 in x 5/8 in Rated Torque 40 in-lb Max. RPM 15, 000 RPM Outside Dia. 1.26 in Overall Length 1.61 in Material - Couplings Aluminum Min. Bore (In.) 0.236 in Min. Bore (mm) 6.0 Max. Bore (In.) 0.63 in Max. Bore (mm) 16 mm Hub Dia. 1.26 in Length through Bore 0.551 in Screw Type Clamp Screw Screw Size M4 Max. Angular Misalignment 1.2 Degrees Max. Parallel Misalignment (In.) 0.004 in Max. Axial Misalignment (In.) +/-0.012 Max. Temp. 212 Degrees F Size BWC41
Coupling, Bellows, Bore 5/8×5/8 In
- Motion Control Shaft Couplings Zero backlash Transmit low reactionary loads on bearings
SKU: B007IAHXXM
Category: Disc
Description
Additional information
Asin | B007IAHXXM |
---|---|
Dimensions | |
Weight | |
Manufacturer |
Reviews (0)
Be the first to review “Coupling, Bellows, Bore 5/8×5/8 In” Cancel reply
Related products
- Jumbo hub for use with drop-in spacer disc coupler assembly (not included)
- Assembly allows coupling the shafts without disturbing the hubs
- Accommodates angular, axial, and parallel misalignment
- Rotational speeds up to 9,100 rpm without special balancing
- Meets American Gear Manufacturers Association (AGMA) Class 9 balance requirements
- Unitized disc pack with 6 bolt design
- Torsionally rigid without any backlash
- No need for lubrication or maintenance
- No wearing parts and high resistance to harsh environmental conditions
- Mini disc (MD) coupling assembly for use in applications requiring high torsional stiffness and torsional integrity
- Aluminum hubs for light weight, stainless steel discs for strength
- Accommodates angular, axial, and parallel misalignment
- Rotational speeds up to 10,000 rpm
- Clamp-style mount for secure attachment to shaft
- Hub for use with drop-in spacer disc coupler assembly (not included)
- Assembly allows coupling the shafts without disturbing the hubs
- Accommodates angular, axial, and parallel misalignment
- Rotational speeds up to 9,100 rpm without special balancing
- Meets American Gear Manufacturers Association (AGMA) Class 9 balance requirements
Couplings, Collars & Universal Joiners
Lovejoy 69790498642 Size SU110-6 Complete Industrial Coupling, Inch, Rough Stock Bore
Lovejoy 69790498642 Size SU110-6 Complete Industrial Coupling, Inch, Rough Stock Bore
- Single flex plane (SU) disc coupling assembly for use in applications requiring high torsional stiffness and torsional integrity
- Assembly allows coupling the shafts without disturbing the hubs
- Accommodates angular and axial misalignment
- Rotational speeds up to 9,100 rpm without special balancing
- Interference fit and key way for secure attachment to shaft
- Six-bolt kit for use with drop-in spacer disc coupler assembly (not included)
- Assembly allows coupling the shafts without disturbing the hubs
- Accommodates angular, axial, and parallel misalignment
- Rotational speeds up to 9,100 rpm without special balancing
- Meets American Gear Manufacturers Association (AGMA) Class 9 balance requirements
- Motion Control Shaft Couplings Zero backlash Transmit low reactionary loads on bearings
- Mini disc single disc (MDSD) coupling assembly for use in applications requiring high torsional stiffness and torsional integrity
- Aluminum hubs for light weight, stainless steel discs for strength
- Accommodates angular and axial misalignment
- Rotational speeds up to 4,800 rpm
- Clamp-style mount for secure attachment to shaft
Couplings, Collars & Universal Joiners
Lovejoy 69790492602 Size SX228-6 Industrial Coupling Hub Inch
Lovejoy 69790492602 Size SX228-6 Industrial Coupling Hub Inch
- Hub for use with SX-type disc coupler assembly (not included)
- Assembly allows coupling the shafts without disturbing the hubs
- Accommodates angular, axial, and parallel misalignment
- Rotational speeds up to 9,100 rpm without special balancing
- Interference fit and key way for secure attachment to shaft
Couplings, Collars & Universal Joiners
Lovejoy 69790499531 Size SU90-6 Complete Coupling Inch
- Single flex plane (SU) disc coupling assembly for use in applications requiring high torsional stiffness and torsional integrity
- Assembly allows coupling the shafts without disturbing the hubs
- Accommodates angular and axial misalignment
- Rotational speeds up to 9,100 rpm without special balancing
- Interference fit and key way for secure attachment to shaft
Couplings, Collars & Universal Joiners
Lovejoy 69790491459 Size SX228-6 Industrial Coupling Hub, Inch, Rough Stock Bore
Lovejoy 69790491459 Size SX228-6 Industrial Coupling Hub, Inch, Rough Stock Bore
Features |
|
- Hub for use with SXC-type disc coupler assembly (not included)
- Torsionally rigid without backlash
- Accommodates angular, axial, and parallel misalignment
- Rotational speeds up to 9,100 rpm without special balancing
- Interference fit and key way for secure attachment to shaft
Couplings, Collars & Universal Joiners
Lovejoy 69790499690 Size SU90-6 Complete Coupling Inch
Features |
|
Reviews
There are no reviews yet.