Speicfication: coupling size code: 1120depth: 5.3800 ingrid material: Alloy Steel
69790405254 Coupling Grid – 1120 Cplg Size, Alloy Steel Material, 9.1900 in OD
Description
Additional information
| Asin | B09H7L51BW |
|---|---|
| Dimensions | |
| Weight | |
| Manufacturer | Generic |
Reviews (0)
Be the first to review “69790405254 Coupling Grid – 1120 Cplg Size, Alloy Steel Material, 9.1900 in OD”
Related products
Gear & Sleeve
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
Specifications
Description |
8E SLEEVE |
Coupling Size |
8E |
Sleeve Type |
E |
Type |
Sleeves for S-Flex Endurance Couplings |
Material |
EPDM |
Color |
Black |
Connection Type A x B |
Coupling Sleeve |
Weight |
1.15 lb |
Nominal Torque |
1475 in·lb166.66 N·m |
Lovejoy 8E 2-Piece S-Flex Coupling Rubber Sleeve
- Lovejoy offers flexible sleeves for S-Flex Endurance couplings in three designs: one-piece solid, one-piece split, and two-piece with retaining ring
- The one-piece split design provides solutions for applications with unique requirements where small shaft separations inhibit the installation of a one-piece solid sleeve
- Pre-molded teeth along the diameter of the sleeve engage with teeth of the coupling flanges
- No clamps or screws are needed to connect the flanges with the
- Urethane for transferring and absorbing shock load
- Absorbs shock and misalignment within the coupling assembly for reduced wear on the shaft assembly
- Unit count: 1.0
- Included components: Spider
- For use with Lovejoy C type (Medium duty) Jaw style flexible coupling assembly (sold separately)
- Cast iron for non-corrosive applications where strength and heat dissipation are factors and weight is not
- Transfers shock and misalignment to the center element of the coupling assembly for reduced wear on the shaft assembly
- Package Dimensions: 5.25" (L) x 5.25" (W) x 1.0" (H)
- Product Type: Bearings And Bushings
- Package Quantity: 1
- Country Of Origin: United States
- For use with Lovejoy RRSC type Jaw style flexible coupling assembly (sold separately)
- Transfers shock and misalignment to the center element of the coupling assembly for reduced wear on the shaft assembly
- Tines for locking hub to spacer assembly
- Country of origin: United States
- For use with Lovejoy jaw type flexible coupling assembly (sold separately)
- Nitrile rubber for transferring and absorbing shock load
- Solid center design to keep shafts of the driver and driven equipment separate by a standard gap
- Operating temperatures range from -40 to 212 degrees F (-40 to 100 degrees C)
- For use with Lovejoy E type S-Flex series flexible coupling assembly (sold separately)
- EPDM synthetic rubber for transferring and absorbing shock load
- Teeth help distribute the torsional load across the sleeve and flanges, reducing wear and extending service life
- Country of origin: United States
Reviews
There are no reviews yet.