Couplings, Collars & Universal Joiners

TB Woods WES3

Spacer Two Piece Element, Polyether Urethane Material

Model: WES3

TB Wood’s Dura-Flex® couplings are designed from the ground up using finite element analysis to maximize flex life. Perfect for a wide variety of applications -- including those with uniform to heavy shock loads -- Dura-Flex® couplings employ a light weight element that absorbs shock loading and torsional vibration. These couplings are available in stock bore-to-size (BTS), Taper-Lock® and Sure-Grip® bushed (QD) hubs.

V-Belt Pulleys & Sheaves

TB Woods 3V3.351 Sheave

Narrow Sheave, 3V Belt Section, 3.35 O.D. in., 1 Grooves, Cast Iron Material

Model: 3V3.351

TB Wood’s Narrow (Ultra-V) sheaves include three cross sections: 3v, 5v and 8v and are constructed of fine grain, high tensile cast iron and have been carefully engineered to assure maximum performance over a long life span. For applications with special requirements, Wood’s sheaves are also available on a made-to-order basis in either cast or ductile iron, in Sure-Grip® or bored-to-suit construction.

Bushings & Bushed Bearings

TB Woods TL251725MM

25 mm. Bore, Taper-Lock™ Bushing, Size 2517, Steel Material

Model: TL251725MM

The Taper-Lock™ bushing system keeps the sprocket hubs narrow so the length-thru-bore dimension is less than ever before. The left-justified hub design allows shaft mounting close to bearings, keeping the center of load dimension small while preventing issues with high overhung loads.\n\nTaper-Lock™ bushings are split through the flange and gradual taper to provide a true clamp fit on the shaft that is the equivalent of a shrink fit.

Bushings & Bushed Bearings

TB Woods Type JA34 Sure-Grip Bushing

3/4 in. Bore, Quick Detachable Sure-Grip® Bushing, Size JA, Steel Material

Model: JA34

Sure-Grip® Quick Detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing’s position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters, and the mounting of different sheaves on the same shaft using the same bushing.

Bushings & Bushed Bearings

TB Woods TL4040312

3 1/2 in. Bore, Taper-Lock™ Bushing, Size 4040, Steel Material

Model: TL4040312

The Taper-Lock™ bushing system keeps the sprocket hubs narrow so the length-thru-bore dimension is less than ever before. The left-justified hub design allows shaft mounting close to bearings, keeping the center of load dimension small while preventing issues with high overhung loads.\n\nTaper-Lock™ bushings are split through the flange and gradual taper to provide a true clamp fit on the shaft that is the equivalent of a shrink fit.

Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
Cast iron for resistance to wear, galling, and corrosion
Keyed to the shaft to prevent the shaft from rotating in the bushing
Interchangeable with taper lock bushings from various manufacturers

Couplings, Collars & Universal Joiners

TB Woods 4J-3/4

4J x 3/4 in. BTS Flange, Sintered Carbon Steel Material

Model: 4J34

Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.

Couplings

TB Woods 10HS Sleeve

10HS Hytrel Sleeve, Split Construction

Model: 10HS

Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.

V-Belt Pulleys & Sheaves

TB Woods 2BK3478 V-Belt Sheave

FHP Sheave, B-5L-A-4L Belt Section, 3.75 O.D. in., 2 Grooves, Cast Iron Material

Model: 2BK3478

TB Wood’s light-duty sheaves are available in two types, both with one and two grooves. "AK" sheaves are made to accommodate A (4L) belts; "BK" sheaves are made for A (4L) or B (5L) belts. The two lines of sheaves have identical pitch diameters when using A or 4L belts. Wood’s light-duty sheaves can be equipped with Wood’s "QT" Sure-Grip QD-type bushings, quick-detachable tapered bushings that are split through flange and tapered surface to provide a true clamp that is comparable to a shrink fit.

Sheaves

TB Woods 363B Sheave

Classical Sheave, A-B Belt Section, 3.95 O.D. in., 3 Grooves, Ductile Iron Material

Model: 363B

TB Wood’s Classical (also known as Conventional) V-belts include five cross sections: A, B, C, D, and E. These sections are a continuing development of the original V-belts of the 1930’s. A, B, C, and D belts are available in wrapped or cog construction and all are static conducting, and oil and heat resistant. (Note: E section V-belts are available for replacement on existing drives, but are not recommended for new drive designs.)

Sheaves

TB Woods 2AK741 V-Belt Sheave

FHP Sheave, A-4L-3L Belt Section, 7.25 O.D. in., 2 Grooves, Cast Iron Material

Model: 2AK741

TB Wood’s light-duty sheaves are available in two types, both with one and two grooves. "AK" sheaves are made to accommodate A (4L) belts; "BK" sheaves are made for A (4L) or B (5L) belts. The two lines of sheaves have identical pitch diameters when using A or 4L belts. Wood’s light-duty sheaves can be equipped with Wood’s "QT" Sure-Grip QD-type bushings, quick-detachable tapered bushings that are split through flange and tapered surface to provide a true clamp that is comparable to a shrink fit.

Sheaves

TB Woods 3V603

TB Woods 3V603 Narrow V-Belt Sheave, 3V Belt Section, 3 Grooves, SDS Bushing required, Cast Iron, 6" OD

Narrow Sheave, 3V Belt Section, 6 O.D. in., 3 Grooves, Cast Iron Material

Model: 3V603
TB Wood’s Narrow (Ultra-V) sheaves include three cross sections: 3v, 5v and 8v and are constructed of fine grain, high tensile cast iron and have been carefully engineered to assure maximum performance over a long life span. For applications with special requirements, Wood’s sheaves are also available on a made-to-order basis in either cast or ductile iron, in Sure-Grip® or bored-to-suit construction.

Couplings, Collars & Universal Joiners

TB Woods 8JS

8JES EPDM Sleeve, Split Construction

Model: 8JS

Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.