Lovejoy C 5 Sleeve.

Lovejoy 69790400130 Cast Iron C 5 Sleeve, 8.12″ OD, 12.25″ OAL, 270900 Inch Pounds.

Dimensional Data

Performance Data

Continuous Sleeve Series

Features:

• Simple and inexpensive all steel type of gear coupling constructed with a single sleeve and 2 hubs
• Comparatively simple installation
• Precision cut 20° pressure angle gear teeth with minimum backlash
• Most standard configurations are available as stock items
• Angular misalignment of 1/2° per gear mesh (flex-plane)
• Sizes 7/8 through 12, to accommodate bore sizes up to and including 12.50 inches
• Interference fit (standard) and Clearance fit on bores are available
• Load Capacities range from 2,500 in-lbs up to 2,520,000 in-lbs
• Designs for applications requiring horizontal and vertical orientation, full-flex, flex-rigid, mill-motor, disengagement, sliding hubs, Shear Pin, floating shaft, and spacers
• Patented and tested BUNA N seal design with reinforced washers bonded to the inside edges which positively retain lubricant and seal the interior from outside contaminants
• Reinforced rubber seals with snap rings to hold in lubricant
• Two snap rings made of hardened spring steel which securely hold the coupling together, are easy to install or remove, yet withstand 100,000 pounds of end thrust

The C Type coupling consists of two flex hubs, one sleeve and one accessory kit consisting of seals and snap rings. Reinforced rubber seals with snap rings hold lubricant in place.

Lovejoy C 5 Sleeve