| Item | Flexbloc & Mincase Speed Reducers |
| Nominal Ratio | 40:1 |
| Input RPM | 1750 rpm |
| Nominal Output RPM | 44 RPM |
| Standards | NEMA, iec |
| Pinion Material | Hardened Steel |
| Bearings | Ball |
| Solid/Hollow Output Shaft | Solid/Hollow |
| Max. Input HP | 2.25 hp |
| Speed Reducer Type | Right Angle |
| Lubrication | Food Grade Synthetic |
| Shaft Orientation | Right Angle |
| Single/Double Output/Universal | Universal |
| Number of Stages | 1 |
| Seal Type | Double Lip |
| Output Torque @ 1/2 HP | 509 in-lb |
| Output Torque @ 1/4 HP | 262 in-lb |
| Finish | Tural |
| Frame | 56c |
| Output Torque @ 3/4 HP | 775 in-lb |
| Housing Material | Aluminum |
| Gear Type | Worm |
| Overhung Load | 2,250 lb |
| Mounting | Universal Foot and Flange-Mount |
| Output Torque @ 1/6 HP | 166 in-lb |
| Output Torque @ 1 HP | 1,076 in-lb |
| Output Torque @ 1/3 HP | 346 in-lb |
| Reducer Model No. | SK1SI75 |
| Worm Gear Material | Fine-Grained Bronze Alloy |
| Worm Center Distance | 2.95 in |
| Rotation | CW/CCW |
| Max. Output Torque | 2,212 in-lb |
| Nominal Output rpm | 44 rpm |
| Motor Frame Designation | 56C |
| Housing Material Finish | Tural |
| Bearing Type | Ball |
| Maximum Input Horsepower | 2.25 hp |
| Maximum Output Speed | 44 RPM |
| Shaft Material Grade | AISI 1045 |
| Mounting Orientation | Any Angle |
| Base to Center | 3.39 in |
| Gear Ratio | 40:1 |
| Maximum Input Speed | 1,750 RPM |
| Maximum Output Torque | 2212 in-lb |
| Output Shaft Type | Hollow |
| Input Connection Type | Right Angle |
| Overhung Load Capacity | 2,250 ft-lb |
