Lovejoy L225 Jaw Coupling Hub 13T Spline Bore 8/16 DP with L-Loc

68514437940, L Type Hubs – Splines & Special Bores

Dimensional Data

Coupling Size	L225
Dimension T	1/2-13
Length thru Bore	2.180 in 55.37 mm
Outside Diameter	5.00 in 127.00 mm
Overall Length	5.340 in 135.64 mm
Spline Size	13t 8/16 DP
Min. Bore (Dimensions ID1/ID2)	0.750 in 19.00 mm
Max. Bore (Dimensions ID1/ID2)	2.625 in 67 mm
Hub Length	3.180 in 80.77 mm
Dimension G	1 in 25.40 mm
Dimension SL	1.000 in 25.40 mm
Cubic inches	79.50000 in³

Features

Features

Fail-safe – will still perform if elastomer fails No metal to metal contact Resistant to oil, dirt, sand, moisture and grease More than 850,000 combinations of bore sizes Most types available from stock in 24 hours

Lovejoy L225 Jaw Coupling Hub 13T Spline Bore 8/16 DP with L-Loc

This Lovejoy jaw coupling spline hub replaces spline hubs on Lovejoy L type jaw style flexible couplings and is made of cast iron for non-corrosive applications where strength and heat dissipation are factors and weight is not.

This hub is keyed to mesh with the splines on a shaft and transfers shock and misalignment from the shaft to the center element of the coupling assembly for reduced wear on the shaft assembly.

Lovejoy Jaw style couplings are suitable for use in various industrial power transmission applications such as compressors, blowers, pumps, conveyors, mixers, and gear boxes, among others.

Flexible couplings are used to link two rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from one shaft to the other.

Most flexible couplings consist of two hubs and a middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the two shafts.

Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from one shaft to another in the form of stresses, loads, vibrations, and other forces, which vary from one type of misalignment to another.

Flexible couplings are used in a broad range of applications, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.

Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products.

Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut für Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance.

The company, founded in 1900, is based in Downers Grove, IL.

Lovejoy L225 Jaw Coupling Hub 13T Spline Bore 8/16 DP with L-Loc

Asin	B004QWZVKC