Lovejoy C 5 Sleeve.
Lovejoy 69790400130 Cast Iron C 5 Sleeve, 8.12″ OD, 12.25″ OAL, 270900 Inch Pounds.
Dimensional Data
Size | 5 in |
Dimension LS | 5.750 in 146.05 mm |
Outside Diameter | 10.750 in10.75 mm |
Overall Length | 12.250 in 311.15 mm |
Max. Bore (Dimensions ID1/ID2) | 5.750 in 160.00 mm |
Dimension CBD | 8.120 in 206.25 mm |
Dimension DC | 0.250 in 6.35 mm |
Dimension G | 0.250 in 6.35 mm |
Dimension G1 | 0.750 in 19.05 mm |
Dimension HD | 8.250 in 209.55 mm |
Dimension R | 12.250 in 311.15 mm |
Dimension SL | 2.880 in 73.15 mm |
Cubic inches | 664.48438 in³ |
Performance Data
Max. Speed (Unbalanced) | 2100 rpm |
Nominal Torque | 270900.00 in·lb |
Max. Angular Misalignment (per Mesh) | 0.25 º |
Parallel Misalignment | 0.007 in |
Continuous Sleeve Series
Features:
- Simple and inexpensive all steel type of gear coupling constructed with a single sleeve and 2 hubs
- Comparatively simple installation
- Precision cut 20° pressure angle gear teeth with minimum backlash
- Most standard configurations are available as stock items
- Angular misalignment of 1/2° per gear mesh (flex-plane)
- Sizes 7/8 through 12, to accommodate bore sizes up to and including 12.50 inches
- Interference fit (standard) and Clearance fit on bores are available
- Load Capacities range from 2,500 in-lbs up to 2,520,000 in-lbs
- Designs for applications requiring horizontal and vertical orientation, full-flex, flex-rigid, mill-motor, disengagement, sliding hubs, Shear Pin, floating shaft, and spacers
- Patented and tested BUNA N seal design with reinforced washers bonded to the inside edges which positively retain lubricant and seal the interior from outside contaminants
- Reinforced rubber seals with snap rings to hold in lubricant
- Two snap rings made of hardened spring steel which securely hold the coupling together, are easy to install or remove, yet withstand 100,000 pounds of end thrust
The C Type coupling consists of two flex hubs, one sleeve and one accessory kit consisting of seals and snap rings. Reinforced rubber seals with snap rings hold lubricant in place.
