Couplings
Martin ML100BLK 1/2 In Jaw Coupling Hub
JAW COUPLING BLANK ML100BLK 1/2 UPC: 697950216492 Martin Offers Two Complete Lines of Jaw Couplings, One for Greater Horsepower and One for Interchangeability. Features include: no lubrication, easy installation, no metal to metal contact resistant to oil, dirt, sand, moisture, grease, easy inspection of load carrying spider, flexibility of angular or parallel misalignment of shafts by Buna-N Spider member permits smooth “Power Transmission”. Buna Rubber, Hytrel and Urethane Spiders are stocked in all branches.
Martin ML100SSBLK 1/2in Stainless Steel Jaw Coupling Hub
Cplg Jaw Stainless Blank ML100SSBLK 1/2 UPC: 697950493145 Martin Offers Two Complete Lines of Jaw Couplings, One for Greater Horsepower and One for Interchangeability. Features include: no lubrication, easy installation, no metal to metal contact resistant to oil, dirt, sand, moisture, grease, easy inspection of load carrying spider, flexibility of angular or parallel misalignment of shafts by Buna-N Spider member permits smooth “Power Transmission”. Buna Rubber, Hytrel and Urethane Spiders are stocked in all branches.Agricultural & Construction Machinery
MOOG 231 U-joint
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower.Material:alloy steel,nitrile
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Agricultural & Construction Machinery
MOOG 235 U-joint
Product Attributes
Length Axis 1 | 2.557 IN |
Length Axis 1 | 64.9 MM |
Length Axis 2 | 2.557 IN |
Length Axis 2 | 64.9 MM |
Bearing Cap Type | 4 Grooved Round Bearings |
Greasable | YES |
Bearing Cap Axis 2 Diameter | 1.125 IN |
Bearing Cap Axis 2 Diameter | 28.6 MM |
Bearing Cap Axis 1 Diameter | 1.125 IN |
Bearing Cap Axis 1 Diameter | 28.5 MM |
Bearing Type A | Round Grooved |
Bearing Type B | Round Grooved |
Length Measurement A | Outside of Groove to Outside of Groove |
Length Measurement B | Inside of Groove to Inside of Groove plus thickness of 2 Lock Rings |
LUBE FITTING LOCATION | Flush-type lube fitting in bearing |
OE Series | Mechanics 3, Saginaw 44 and American Axle 1344 |
Part Description | Universal Joint |
U-Joint Identification | 4 Grooved Round Bearings |
Agricultural & Construction Machinery
MOOG 271 U-joint
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower. Material: alloy steel, nitrile
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Agricultural & Construction Machinery
Moog 927 Universal Joint
Application Summary
Allis-Chalmers, Austin-Western, Case, Cat, Clark, Deere, Eaton, Fiat-Allis, IH, JCB, Kawasaki, Komatsu, Massey-Ferguson, Michigan, Tadano, Terex, Volvo & Wabco (7C - 4 HWD)Agricultural & Construction Machinery
MOOG Greaseable Premium 374 U-joint
BUILT TO LAST -- Rugged design specifically engineered for fleets, off-highway and commercial vehicles. Material :nitrile STRONG AND DURABLE -- Bearing cups are cold-formed, case-hardened and precision ground for strength and durability KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants GREASEABLE DESIGN -- Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution INHIBITS PREMATURE WEAR -- Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear RELIABLE PERFORMANCE -- Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on MOOG Greaseable Premium 374 U-jointAutomotive
MOOG Greaseable Premium 437G U-joint
Product Attributes
Length Axis 1 | 2.439 IN |
Length Axis 1 | 61.951 MM |
Length Axis 2 | 2.439 IN |
Length Axis 2 | 61.951 MM |
Bearing Cap Type | 4 Plain Round Bearings |
Greasable | YES |
Bearing Cap Axis 2 Diameter | 1.063 IN |
Bearing Cap Axis 2 Diameter | 27 MM |
Bearing Cap Axis 1 Diameter | 1.063 IN |
Bearing Cap Axis 1 Diameter | 27 MM |
Length Measurement A | Outside of Bearing To Outside of Bearing |
Length Measurement B | Outside of Bearing To Outside of Bearing |
LUBE FITTING LOCATION | Regular Lube Fitting in Bearing |
OE Series | Spicer 1210 |
Part Description | Universal Joint |
U-Joint Identification | 4 Plain Round Bearings |
Agricultural & Construction Machinery
MOOG Greaseable Super Strength 220 U-joint
Universal Joint Dimensions
Length Axis 1 (MM) 81.788
Length Axis 1 (IN) 3.22
Length Axis 2 (MM) 81.788
Length Axis 2 (IN) 3.22
Bearing Cap Type 4 Plain Round Bearings
Greaseable YES
Bearing Cap Axis 2 Diameter (IN) 1.189
Bearing Cap Axis 2 Diameter (MM) 30.188
Bearing Cap Axis 1 Diameter (MM) 30.188
Bearing Cap Axis 1 Diameter (IN) 1.189
Part Description
Universal Joint
Automotive
Neapco 1-1475 U-Joint
- 1-1475 Series Same as L600 Neapco, 6 Weasler, 200-0600
-
Product Attributes
U-Joint Style (Inside or Outside snap ring) ISR Distance between retaining rings G1 1.443 Cap Outside Diameter D1 0.969 Distance between retaining rings G2 1.443 Cap Outside Diameter D2 0.969 OE Manufacturer ROCKWELL OE Series L6N (PTO) Converts From Joint Converts To Joint Greasable Y Notes 1 lube fitting in cross
Couplings