| Gearmotor Type | DC Gearmotor |
| Shaft Orientation | Right Angle |
| Enclosure | TENV |
| Voltage | 24VDC |
| Motor Type | Gearmotor DC |
| Nameplate RPM | 10 RPM |
| Max. Torque | 332 in-lb |
| Overhung Load | 670 lb |
| Rotation | CW/CCW |
| Mounting | All Position |
| Gear Ratio | 180.3:1 |
| Input HP | 1/15 |
| Bearings | Ball |
| Full Load Amps | 3.2 A |
| Gear Material | Steel |
| Lubrication | Semi-Fluid Grease |
| Seals | Lip Type |
| Standards | CuRus |
| RPM Range | 0 to 15 |
| Thermal Protection | None |
| Gearmotor Enclosure | Totally Enclosed Nonventilated |
| Reversible Shaft Output | Yes |
| Brushes | Externally Replaceable |
| Item | Dc Gearmotor |
| Gearmotor Shaft Type | Hollow |
| Housing Material | Steel |
| Rear Shaft Encoder/Pulse Generator Mounting | No |
| Max. Ambient Temp. | 40 Degrees C |
| Insulation Class | F |
| Finish | Powdered Coat |
| No Load RPM | 10 RPM |
| Gearmotor Rotation | CW/CCW |
| Gear Type | Hypoid |
| Gearmotor Mounting Position | All Angle |
| Application | Agriculture, Conveyors, Food and Beverage Equipment, Industrial Machinery, Packaging |
| Shaft | Hollow Output |
| Gearmotor Shaft Orientation | Right Angle |
| Gear Case | Die Cast Aluminum |
| Gearmotor Voltage | 24V DC |
| Operating Voltage | 24V DC |
| No Load Speed | 10 RPM |
| Seal Type | Lip Type |
| IP Rating | IP50 |
| Bearing Type | Ball |
| Nameplate Speed | 10 RPM |
| Input Horsepower | 1/15 hp |
| Maximum Torque | 332 in-lb |
| Overhung Load Capacity | 670 ft-lb |
| Housing Material Finish | Powder Coated |
| Maximum Ambient Temperature | 40 Degrees C |
| Full Load Current | 3.2 A |
| Mounting Orientation | Any Angle |
| Motor Enclosure | Totally Enclosed Nonventilated |
