100

1.180 in29.97 mm

8.860 in225.00 mm

1.500 in38.00 mm

3.620 in91.95 mm

117.74940 in³

-40 to 248 ºF

87610.00 in·lb9898.00 N·m

0.190 in

0.1500 in

0.039 to 252 in

0.008 to 0.027 in

5.00 º

1250.00 hp

• Four types of spiders are available for the CJ Series of couplings

• Urethane spiders provide high abrasion resistance and elasticity, along with good damping characteristics

• The spiders are offered in a variety of shore hard nesses, each providing a different level of torque capacity, damping, and chemical resistance

• The 92A shore insert (yellow in color) is the standard, offering excellent torque carrying capacity

• The 80A shore insert (blue) offers the best damping characteristics

• The 95/98A shore spider (red) offers higher torque than the standard 92 shore, but retains greater damping capacity compared to the 64D shore insert (green)

• The 64D shore insert is offered for high humidity environments, higher temperatures, and offers the highest torque capacity

• The standard curved jaw spider design has a hole in the center to accommodate small between shaft end measurements

• The 80A, 92A, and 95/98A shore spiders have a temperature capacity of 212° F

• The 64D shore spider has a temperature capacity of 230° F

• The curved jaw spider’s urethane material also resists oil, dirt, sand, grease, moisture, many solvents, as well as atmospheric effects of ozone

• Maximum bore may be achieved through the use of a shallow keyway.

• Maximum bore refers to maximum straight bore with keyway allowed in hub.

• Outside Diameter is equal to Dimension HD for B style aluminum sizes: 19, 24, and 28.

• S = Solid hub with no bore

• Spider Outside Diameter (Dimension A) is equal to Outside Diameter

• The values regarding displacement are provided assuming normal operating conditions (i.e. temperature, torque with nominal rating of the coupling, speed/ RPM rating of the coupling, and misalignment).

  Careful installation (i.e. alignment) and periodic inspection should be provided to provide the optimum life of the coupling. Special consideration should be given as to the position of the shafts and the amount of axial movement the coupling will be exposed to.

  The more accurate the alignment of the coupling, will result in greater life of the elastomer. A coupling guard and rotating equipment safety procedures should always be followed.

  Please consult the Lovejoy web site at www.lovejoy-inc.com for assembly instructions of the curved jaw coupling.