TB Woods 7/5VP600
TB Woods 7/5VP600
Narrow, Premium Banded Belt, 7 Ribs, Belt Section 5V
7/5VP600
Replaces several belts with the strength of a single belt. Banded belts feature a multiple layer tie band that provides excellent lateral rigidity to prevent belts from turning over or from coming off of the drive.
Description
Additional information
| Asin | B078YCSB9S |
|---|
Reviews (0)
Be the first to review “TB Woods 7/5VP600”
Related products
Bushings & Bushed Bearings
TB Woods TL4040312
3 1/2 in. Bore, Taper-Lock™ Bushing, Size 4040, Steel Material
Model: TL4040312
The Taper-Lock™ bushing system keeps the sprocket hubs narrow so the length-thru-bore dimension is less than ever before. The left-justified hub design allows shaft mounting close to bearings, keeping the center of load dimension small while preventing issues with high overhung loads.\n\nTaper-Lock™ bushings are split through the flange and gradual taper to provide a true clamp fit on the shaft that is the equivalent of a shrink fit.- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
- Cast iron for resistance to wear, galling, and corrosion
- Keyed to the shaft to prevent the shaft from rotating in the bushing
- Interchangeable with taper lock bushings from various manufacturers
Sheaves
TB Woods 3V603
TB Woods 3V603 Narrow V-Belt Sheave, 3V Belt Section, 3 Grooves, SDS Bushing required, Cast Iron, 6" OD
-
Narrow Sheave, 3V Belt Section, 6 O.D. in., 3 Grooves, Cast Iron Material
Model: 3V603
TB Wood’s Narrow (Ultra-V) sheaves include three cross sections: 3v, 5v and 8v and are constructed of fine grain, high tensile cast iron and have been carefully engineered to assure maximum performance over a long life span. For applications with special requirements, Wood’s sheaves are also available on a made-to-order basis in either cast or ductile iron, in Sure-Grip® or bored-to-suit construction.
Couplings, Collars & Universal Joiners
TB Woods 5J
5JE EPDM Sleeve, One-Piece Construction
Model: 5J
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.
Bushings & Bushed Bearings
TB Woods Type JA34 Sure-Grip Bushing
3/4 in. Bore, Quick Detachable Sure-Grip® Bushing, Size JA, Steel Material
Model: JA34
Sure-Grip® Quick Detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing’s position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters, and the mounting of different sheaves on the same shaft using the same bushing.
Bearings, Balls & Bushings
TB Woods QT12
TB Woods Type QT QT12 Sure-Grip Bushing
QT12
1/2 in. Bore, Quick Detachable Sure-Grip® Bushing, Size QT, Steel Material
MFR #QT12
Couplings
TB Woods 4J Sure Flex Sleeve
4JE EPDM Sleeve, One-Piece Construction
Model: 4J
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.
Couplings
TB Woods 8H Sleeve
8H Hytrel Sleeve, One-Piece Construction
Model: 8H
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.
Bushings & Bushed Bearings
TB Woods TL251725MM
25 mm. Bore, Taper-Lock™ Bushing, Size 2517, Steel Material
Model: TL251725MM
The Taper-Lock™ bushing system keeps the sprocket hubs narrow so the length-thru-bore dimension is less than ever before. The left-justified hub design allows shaft mounting close to bearings, keeping the center of load dimension small while preventing issues with high overhung loads.\n\nTaper-Lock™ bushings are split through the flange and gradual taper to provide a true clamp fit on the shaft that is the equivalent of a shrink fit.
Couplings
TB Woods 9HS
9HS Hytrel Sleeve, Split Construction
Model: 9HS
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.
Couplings
TB WOODS 10J SLEEVE
10JE EPDM Sleeve, One-Piece Construction
Model: 10J
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.
Sheaves
TB Woods 363B Sheave
Classical Sheave, A-B Belt Section, 3.95 O.D. in., 3 Grooves, Ductile Iron Material
Model: 363B
TB Wood’s Classical (also known as Conventional) V-belts include five cross sections: A, B, C, D, and E. These sections are a continuing development of the original V-belts of the 1930’s. A, B, C, and D belts are available in wrapped or cog construction and all are static conducting, and oil and heat resistant. (Note: E section V-belts are available for replacement on existing drives, but are not recommended for new drive designs.)
Couplings
TB Woods AL110114 jaw coupling
AL110 x 1-1/4 in. Bore, Aluminum Material
Model: AL110114
TB Wood's L-Jaw couplings are designed to meet high-quality standards while remaining affordable. Available with four insert materials and three hub materials, L-Jaw couplings are 100% interchangeable with industry-standard designs.
Couplings
TB Woods 9H Sleeve
9H Hytrel Sleeve, One-Piece Construction
Model: 9H
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.
Couplings
TB Woods 10HS Sleeve
10HS Hytrel Sleeve, Split Construction
Model: 10HS
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.
Bushings & Bushed Bearings
TB Woods SDS12 Sure-Grip Bushing
1/2 in. Bore, Quick Detachable Sure-Grip® Bushing, Size SDS, Steel Material
Model: SDS12
Sure-Grip® Quick Detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing’s position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters, and the mounting of different sheaves on the same shaft using the same bushing.
Couplings
TB Wood's WE20
Standard Two Piece Element, Polyether Urethane Material
Model: WE20
TB Wood’s Dura-Flex® couplings are designed from the ground up using finite element analysis to maximize flex life. Perfect for a wide variety of applications -- including those with uniform to heavy shock loads -- Dura-Flex® couplings employ a light weight element that absorbs shock loading and torsional vibration. These couplings are available in stock bore-to-size (BTS), Taper-Lock® and Sure-Grip® bushed (QD) hubs.
V-Belt Pulleys & Sheaves
TB Woods 2BK3478 V-Belt Sheave
FHP Sheave, B-5L-A-4L Belt Section, 3.75 O.D. in., 2 Grooves, Cast Iron Material
Model: 2BK3478
TB Wood’s light-duty sheaves are available in two types, both with one and two grooves. "AK" sheaves are made to accommodate A (4L) belts; "BK" sheaves are made for A (4L) or B (5L) belts. The two lines of sheaves have identical pitch diameters when using A or 4L belts. Wood’s light-duty sheaves can be equipped with Wood’s "QT" Sure-Grip QD-type bushings, quick-detachable tapered bushings that are split through flange and tapered surface to provide a true clamp that is comparable to a shrink fit.
Couplings
TB Wood's L15042MM Hub
L150 x 42 mm. Bore, Sinter Carbon Steel Material
Model: L15042MM
TB Wood's L-Jaw couplings are designed to meet high-quality standards while remaining affordable. Available with four insert materials and three hub materials, L-Jaw couplings are 100% interchangeable with industry-standard designs.
Couplings
TB Woods 1040T158
1040T X 1-5/8 G-Flex Grid Coupling Hub
Model: 1040T158
TB Wood’s Taper Grid Coupling is the industry standard, state-of-the-art design from TB Wood’s and Bibby Turboflex, the original grid coupling manufacturer. The G-Flex 1000 / Bibby 2000 Series is an all-metal coupling that provides positive protection against the damaging effects of shock loads and vibration. Aluminum horizontal cover (T10), and all-steel vertical cover (T20) designs are available. G-Flex tapered grid couplings are an excellent choice where torsional flexibility and vibration damping are primary concerns.
Bushings & Bushed Bearings
TB Woods SH34 Sure-Grip Bushing
-
3/4 in. Bore, Quick Detachable Sure-Grip® Bushing, Size SH, Steel Material
Model: SH34
Sure-Grip® Quick Detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing’s position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters, and the mounting of different sheaves on the same shaft using the same bushing. - Quick disconnect bushing with a torque capacity of 3,500 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
- Split through flange and taper to provide strong clamping on the shaft
- Cast iron for resistance to wear, galling, and corrosion
- Keyed to the shaft to prevent the shaft from rotating in the bushing
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads
Couplings, Collars & Universal Joiners
TB Woods WES3
Spacer Two Piece Element, Polyether Urethane Material
Model: WES3
TB Wood’s Dura-Flex® couplings are designed from the ground up using finite element analysis to maximize flex life. Perfect for a wide variety of applications -- including those with uniform to heavy shock loads -- Dura-Flex® couplings employ a light weight element that absorbs shock loading and torsional vibration. These couplings are available in stock bore-to-size (BTS), Taper-Lock® and Sure-Grip® bushed (QD) hubs.
Couplings, Collars & Universal Joiners
TB Woods 6J
6JE EPDM Sleeve, One-Piece Construction
Model: 6J
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.
Couplings, Collars & Universal Joiners
TB Woods 9S112
9S x 1-1/2 in. BTS Flange, High Strength Cast Iron Material
Model: 9S112
Our new Sure-Flex Plus® EPDM and Neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment, and end float. With Sure-Flex couplings, the need for lubrication and maintenance is eliminated.
Couplings, Collars & Universal Joiners
Reviews
There are no reviews yet.